Help me! HOW THE HP 430 LAPTOP BIOS SETUP?

Similar Questions

• How to access my laptop Bios Tecra A4 computer screen?

  How can I access my bios Tecra A4 screen. There are tweaks, I would like to check.

  Hello

  Try using the ESC, and then press F1 to access the BIOS.

  Good bye

• Need help to install the network on laptop drivers

  I have a laptop of HP 2000-239WM and recently erased due to trying to sell. However, when I reinstalled everything back on the PC, no network drivers have been installed, so I have no access to the internet, wireless and wired. Should what programs I install via USB in order to solve this problem?

  The network adapter driver specifically requests the Ethernet, wifi and it...

  Hello McKinley,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you need help to install the network drivers into the laptop.

  Certainly, I understand your concern and will try my best to help you.

  In order to install the NIC drivers in the system, I suggest to visit the link below and check if that helps.

  http://support.HP.com/us-en/drivers/selfservice/HP-2000-200-notebook-PC-series/5091493/model/5119030

  Note: Make sure you have access to the internet to another computer and download the network drivers using the USB and install on your laptop.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• An update of the bricked my laptop BIOS. What to do next?

  I have a Presario F756NR running Windows 7 64-bit.  I upgraded the BIOS of F.08 to f.0Une.  The utility argued that the uprade was successful.  When I rebooted, the computer wouldn't POST.  Whenever I turn it on, the power light and the fan turns on and I can hear the CD drive, do something.  But the screen remains blank and the HDD light shows any activity.  There is no beep codes or flashing lights anywhere.

  Is there a way to fix this, or is it toast?

  I deleted the recovery partition when I installed Windows 7, but I have the recovery CD. Is this helpful at all?

  Thank you!

  Hello:

  Sorry to read about the problem you are experiencing. To the best of my knowledge, your PC is more for the parts (except the motherboard).

  Because you flashed the BIOS under Windows 7 with a flash BIOS written for Windows Vista, and it's a shame that HP is not warn people of the present - on the importance of enforcement based only on a windows flash on the operating system, in that it is supported is the reason why it happened.

  You have upgraded to W7.  You probably followed the BIOS date of issue which show a fix for the potential problem in W7.

  You Flash the BIOS. The flash BIOS seems to be well. You restart the laptop. Brick.

  You are not alone. Dozens of people have posted on this forum with this scenario. I read all the posts and I think that everyone in W7 BIOS, and the BIOS Flash is designed only for XP or Vista.

  Unfortunately, the recovery disks will not help in this situation.

  Think that the BIOS is the spinal cord, which connects the brain of the computer (CPU) with parts of the body (hardware). The failed BIOS flash has been the equivalent of breaking the neck of the PC, resulting in paralysis and death.

  Paul

• Help! How the text (form of a citation)...?

  I just downloaded and started using Illustrator tonight. I've never used before graphics software. I try to draw a Triquetra, using a verse (verse would be in the form of the triquetra). I kinda understand how to write the triquetra symbol (it looks very amaturish, if you ask me). What I can't understand, is to make my text follow the shape of the symbol. There must be a video on how to go about it (that I don't know that I'm not the first to attempt this action). However, I can't find it. Of course, I don't know the proper terminology. Can someone help me with this, or at least guide me in the right direction? I would REALLY appreciate it. Thank you.

  This better

  

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake

• Laptop turned on, password appears on black screen, windows loading bar appeared, then got two options in the BIOS Setup Utility and change Boot Device order, I don't know what is happening, help please!

  My sisters notebook froze and she turned off the power switch, when she turned on the screen was black and a password box appeared when I entered the password, the XP loading bar came as usual and then I had two options at the bottom of the screen. We want to press F9 for and the other was to press F10 for BIOS Setup utility, after seconds, the screen went black and then appeared again the password and the circle continues. The laptop is only 1 week and I don't know if it's something she did or if it's a technical foul, I would be grateful if someone could help me or if I should take it to a technician. The laptop is a Compaq Mini 110 and it works on Windows XP Home Edition.

  Hi, your sisters Notebook is under warranty and it could be a hardware problem.

  As the laptop is only one week.

  I suggest that advise you your sister back to the place where it has been sold since.

  Slan go foill, Paul

• How to remove the Satellite Pro 4600 BIOS password?

  A friend of mine recently bought a Toshiba Satellite Pro 4600 (PS460E-03371-EN). Unfortuately the password of the BIOS was set before the purchase and would like to know how to reset it.
  The machine will not start now.
  Any help as to the location of the BIOS battery or work around this problem will be appreciated.

  Hello

  To remove the BIOS battery will not help. BIOS by removing on laptops is more complicated than on desktop computers. BIOS by removing the procedure depends on the laptop model and it is not the same on all models of laptops.

  A lot of people get the laptop with password and to provide an accurate description how do this in the public forum is not good idea.
  Have you tried to contact the person who sold this laptop and ask BIOS password?

• How can I reset remove bios of the G4 Core 2 Due Series Pavilion

  Please tell me how I can reset remove bios of the Pavilion G4, I forgot the BIOS password.

  My Code stop it is 70886016

  Thank you.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are looking for a password here, we will surely help you with this problem

  Please try this password = 65784038

  Steps to follow:

  1. use the posted above unlock code to access the BIOS

  2 disable all passwords that are enabled

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

  6. then exit the BIOS saving & exit option to save the changes.

  Troubleshooting:

  Incase if the password does not work please try a Hard Reset as follows.

  1. power off the laptop

  2 disconnect the power adapter and remove the battery

  3. press the Power button for 30 seconds

  4. connect the power supply/AC adapter (leave the battery for now) & start Notepad

  5. If now see you a password, please enter the same password I've shared before and press on enter

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star KUDOS left to say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• How can I have the binary file for BIOS for HP G62-b53SE?

  Hello

  How can I have the binary file for BIOS for HP G62-b53SE?

  My bios of the laptop is damaged and I need the BIOS file in binary mode

  Help me please

  Thank you.

  [email protected]

  Ilmaz wrote:

  Hello

  How can I have the binary file for BIOS for HP G62-b53SE?

  My bios of the laptop is damaged and I need the BIOS file in binary mode

  Help me please

  Thank you.

  [email protected]

  Hello

  Download the BIOS.exe file from here: http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55430.exe

  Then rename it to sp55430.zip or simply extract the exe using WinRAR. The binary file is called: 01439.fd. Rename it to 01439.bin if you need...

• PQF65A Qosmio F60 - need help to find the BIOS

  Hi guys.

  I have a TOSHIBA Qosmio F60 PQF65A-016002 and found no indication of how to enter the Bios.
  I put to level my 8 GB memory and it is not working properly when I insert the new memory, so I need to see the settings. Installation of HW does not show me what I need to know.

  Any help would be greatly appreciated!

  As I remember the Qosmio F60 supports BIOS Toshiba.
  It's a little different and to access the BIOS press F1 or ESC after power on.

• Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

  Dear Sirs,

  Can you help me how I can solve my problem:

  I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

  Can you help me how I can connect the wire of series Com (SR232 DATA)?

  Where I connect on the updated satellite of reserve.

  For your information I have is also trailer male sides.

  Concerning

  Ali H. Ba - Aqeel

  [email protected]

  Hello
  you´ve got the alternative to get a PCMCIA Serial Port adapter.
  The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

  Have a try.

• Satellite L750 (PSK2YV) how to go back to the previous version of BIOS

  Hey everybody

  I think that I got the problem after I had downloaded the BIOS update
  My laptop performance becomes slow and week. Now, I want to know how I can remove this patch of Woods

  Hello

  First of all, you can do that because the European driver Toshiba page always provides the latest version of BIOS more BIOS is windows-based and must be run from a running system. So, even if you have an older version of the BIOS, during the upgrade you would get a notification this version of BIOS newer is already installed.

  But what do you mean by become slow?
  I can't imagine that BIOS would slow down the unit

  I recommend to go to the BIOS by pressing F2, and then set its default value.
  Save F9 changes and exit BIOS by pressing F10

• Re: Satellite Pro L40 - killed the laptop BIOS update

  Recently I thought it would be better to download the latest drivers and upgrades for my Satellite pro L40 to keep up-to-date and partners the laptop that works smoothly. I couldn't have worse summer. Before I updated the new driver updates I thought it would be a good idea first update the Bios. So I downloaded the update of the Bios on the Toshiba site, unzipped the files and followed the online instructions for updating the BIOS. I double clicked on the BIOS file to run the update, the laptop says it was end the session, I waited and the Toshiba logo screen came. In the instructions, it says that I have to press F2 now and confirm that the date and time are correct. I should then press F9 to load all the default values and then press F10 to save and exit. At this point, the laptop must away to the loading screen, but... I got a black screen. IV turned off the computer and turn it back on, but still, I get a blank screen. The lights are on but know one's home.

  Could a mod/staff/Board Toshiba administrator please explain to me why I'm going to draw the consequences of my lack full on my face because I followed a form of direct teaching of personnel of Toshiba or... Please run me through the process of bring back my cell partners in life, before that I get my Crown snatched jewels. This isn't a laugh. An upgrade directly from the manufacturer is not intended to cause you problems!

  Please get back to me as soon as POSSIBLE. My first son moments of life (videos, photos) are on this laptop. That cannot be replaced. Please tell me that the laptop can be fixed...

  Hello Durks

  I'm really sorry to hear you I have this problem.
  To be honest, it is not easy to discuss about this because a lot of people on this forum with a similar or same problem reacts quite aggressive if they don t hear exactly the thing they want to hear.

  In any case, I just want to write my comment. Don t be worried about photos and other important data. You can remove the laptop HARD drive, put it in a small box of HDD SATA 2.5 and connect the HARD drive to the other PC / laptop as external device. You will have full access to all stored data. So you can do the backup.

  Update the BIOS.
  What to say at this point?
  I have checked the Toshiba download page and saw that the BIOS update is available for Windows XP Home edition and Vista pre-installed notebooks so I hope you ve chosen the right one. Anyway, it is not easy to fix screwed up in the BIOS. You hate me now, but I think you should contact the nearest Toshiba service provider and ask for help. Call them, explain the situation and ask what you can do about it.

  I hope you will fix this laptop soon.

  Good luck.