Help me speed up my program

Similar Questions

• Problems write in I / O with VISA series (low speed of the program being recorded)

  Hello! I've been monitoring voltage speed of the serial port 230000 baud / s. It is fast and accurate, but when I want to save this data to a tmds, xls, txt file, reduce the speed of the program and buffer overflows in series, which reduces the voltage rate control information. I tried on 2 PC with four core processors. I think that it is not because of the PC.

  Because of what it might be?

  File IO is SLOW.  You must compensate for that somewhere.  Look at the producer/consumer.  The idea here is to have a loop that simply reads the serial port (as fast as it should) and use a queue to pass data to another loop to process and save to disk.

• A registry errors will set help to speed up my computer?

  For me, it was suggested that the registry errors correction would help to speed up my computer. I am reluctant to download anything on the internet that I don't know. Should I bother even doing this and, if so, is there a known Microsoft product that I can download for this?

  What are the mistakes 'register' you know you have?

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• "no access to service settings after deletion to speed up the program.

  on my laptop older, as I mistakenly downloaded a program speed, which was not what it seemed so I deleted, but it changed my settings on all of the parameters of the main service for disabled people and there is no way to start fixing that there is no way to get using Mozilla, also attempted to start restore point , but nothing helped.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Help with opening a photo program help links

  Install a program called INTELLI_STUDIO for my photos

  Almost all of my photos have become small 90 s "s X 60".

  I went to the program help index and sought to help with that.

  My pointer cannot open files that I need to

  What should I do to fix this?  TY

  Hi Daniel,.

  1. Are you referring to Samsung Intelli-studio?
  2. Why you have this program installed? What exactly do you want to perform?

  If you are referring to Samsung Intelli-studio please contact Samsung because it their software and there will be a better person to help you with this problem.

  Please report if you need assistance on issues related to Windows.

• can someone help me choose the right program to open my file on the desktop?

  Try to open the game of chess. It prompted me to choose another file to open chess game of Titian. So I did it by clicking on the internet window explore. now all the progress or files on my desktop changed for symbol (e) of the exploring on them and I can't open them. I don't know how to get it back. Can someone help me?

  Hello

  I would like to know the operating system you work with.

  Method 1) when you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2) in case if it does not help, you must change the associated file. To change the file association for a specific file, you must first display the properties of the file.

  1. You can view the properties of a file by selecting the file and choosing 'Properties' in the file menu. Or you can simply right-click on the file and select "Properties" from the context menu that appears.
  1. To change this file association, click the button change.
  1. You are given a list of recommended programs to open the file, as well as several other programs on your computer. The recommended programs are programs that Windows knows is going to be able to open the current file type. For this reason, choose a program from the list of recommended programs is a good idea. You can choose a program from the list of other programs, but the file cannot open.
  1. You can change this program opens all documents of a certain type of file, and then click the checkbox "Always use the selected program to open this type of file."
  1. Click OK

  Check the link for more information:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  It may be useful

• help to install/uninstall a program (FSX)

  I'm stuck between the installation and uninstallation of Microsoft Flight Simulator X.

  Initially installed, but somehow never installed.  When you are prompted to repair or remove the program, no option seems to work.  Repair the program says that it is a current installation and must be completed.  Remove/uninstall to start over is not possible either as a "run time" error occurs.
  The program seems to be loaded onto the computer (shows less memory on hard drive), but there is no way to access the program without the disc.  Any way I can find a way to complete the installation or replace and uninstall completely and all over again?
  Thanks in advance.
  Rob

  Hi blanton.

  Thank you for visiting Windows Vista Microsoft answers forum.

  I am familiar with this issue, because it can occur if the game is not installed correctly.
  Our action plan will remove all the files associated with the game, and then reinstall it.

  Download and install the Windows Installer CleanUp utility:

  1. Download and install the utility Windows Installer CleanUp from the link below:
     http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
  1. Click Start, point to all programs, and then click Windows Installer Clean Up.
  2. In the list of the products installed , delete all entries that are related to Microsoft Flight Simulator X, you have installation problems.
  3. When you remove the appropriate entries, click exit.
  4. Restart the computer once and then try to reinstall Microsoft Flight Simulator X.

  For reference, you can visit the following link:
  http://support.Microsoft.com/kb/968365

  Please let us know if it helps.

  Thank you and best regards,
  David

• need help for the start up programs etc too of > > > >

  I am currently using Ccleaner as my msconfig works not what me hae questioned here in any case there are 3 categories of start they are; Windows, internet explore and scheduled tasks, can someone tell me which ones I can disable

  Windows.
  Yes HKCU:Run CTFMON. EXE C:\windows\system32\ctfmon.exe
  Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
  Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
  Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
  Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
  Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe
  Yes HKLM:Run HotKeysCmds C:\WINDOWS\system32\hkcmd.exe
  Yes HKLM:Run IgfxTray C:\WINDOWS\system32\igfxtray.exe
  Yes HKLM:Run IntelWireless "C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe" /tf Intel PROSet/Wireless
  Yes HKLM:Run IntelZeroConfig "C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe".
  Yes HKLM:Run MSC "c:\Program Files\Microsoft Security Client\msseces.exe" - hide - runkey
  Yes HKLM:Run persistence C:\WINDOWS\system32\igfxpers.exe
  Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
  Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched
  Yes start common digital line Detect.lnk C:\Program Files line Detect\DLG.exe

  Internet Explorer
  Yes the Blog Extension this C:\Program Files\Windows Live\Writer\WriterBrowserExtension.dll
  Yes Extension diagnose connection problems... %windir%\Network Diagnostic\xpnetdiag.exe
  Yes expansion Messenger C:\Program Files\Messenger\msmsgs.exe
  Yes search Extension C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR. DLL
  No Skype Extension click to call C:\Program Skype skypeieplugin.dll
  Yes Helper AC - Pro C:\Documents and Settings Settings\doug\Application Data\Complitly\AutocompletePro.dll
  Yes to support Adobe PDF link Helper-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll
  Yes to support Google Toolbar Helper-C:\Program Files\Google\Google GoogleToolbar_32.dll
  Yes to support Google Toolbar notify BHO-C:\Program Files\Google\GoogleToolbarNotifier\5.7.7227.1100\swg.dll
  Yes Helper Java (TM)-plug-in 2 SSV Helper-C:\Program Files\Java\jre6\bin\jp2ssv.dll
  Yes Helper Java (TM)-plug-in SSV Helper-C:\Program Files\Java\jre6\bin\ssv.dll
  Yes Helper Class JQSIEStartDetectorImpl-C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
  No Skype Browser Helper C:\Program Skype skypeieplugin.dll assistance
  Yes to support Windows Live Sign - in Helper C:\Program Files\Common Files\Microsoft Shared Windows Live WindowsLiveLogin.dll
  Yes the toolbar Google Toolbar C:\Program Files\Google\Google GoogleToolbar_32.dll

  Scheduled tasks
  Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003Core C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe/nocrashserver/c
  Yes the task FacebookUpdateTaskUserS-1-5-21-1220945662-573735546-839522115-1003UA C:\Documents and Settings\doug\Local Settings\Application Data\Facebook\Update\FacebookUpdate.exe /ua /installsource scheduler
  Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
  Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
  Yes the task antimalware software of Microsoft scheduled scan c:\Program Files\Microsoft Security Scan of Client\MpCmdRun.exe - ScheduleJob - RestrictPrivileges
  Yes the task MpIdleTask c:\Program Files\Microsoft Security Client\MpCmdRun.exe - IdleTask TaskName - MpIdleTask
  Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

  Please let me know if I can disable some and what I can disable without is doing something important... Thanks for your help.

  Yes HKLM:Run Adobe ARM "C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe"
  Yes HKLM:Run ArcSoft Connection Service C:\Program Files\Common ArcSoft Service\Bin\ACDaemon.exe
  Yes HKLM:Run CTSVolFE.exe "C:\Program Files\Creative\Mixer\CTSVolFE.exe" / r
  Yes HKLM:Run Dell QuickSet C:\Program Files\Dell\QuickSet\quickset.exe
  Yes HKLM:Run ehTray C:\WINDOWS\ehome\ehtray.exe

  Yes HKLM:Run SigmatelSysTrayApp %ProgramFiles%\SigmaTel\C-Major Audio\WDM\stsystra.exe
  Yes HKLM:Run "C:\Program Files\Common Java Update\jusched.exe" SunJavaUpdateSched

  Yes the task GoogleUpdateTaskMachineCore C:\Program Files\Google\Update\GoogleUpdate.exe/c
  Yes GoogleUpdateTaskMachineUA C:\Program Files\Google\Update\GoogleUpdate.exe /ua /installsource Task Scheduler
  Yes the task photopadShakeIcon C:\Program NCH Software\PhotoPad\photopad.exe - shakeicon

  I would disable them. but you have to download Autoruns:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  More info comes from Stanley S. and it should help you before you decide who to disable.

  Only startup items that I run are elements of microsoft.

  To demand the same tasks.

  Solutions Explorer, it seems that you have too many toolbars for me, but you should get each of them to see if you want it to run as an add-on, you could also disaable each addon one at the time and the surf for a while and if all is ok, leave this option unchecked.

• Is there a tangible value using a computer speeds temperature & fan program; If so, what are those who have decent recommendations?

  Hello everyone,

  I was curious to know if there is a real value to the installation of a program that monitors a the computer temperature and the fan speed (s)?

  The only program I currently have is Speccy and is not (as everyone knows) as shown in which displays the user interface.  Few programs I looked online... I can't really make sense of all of this information.  For this reason, I question the point of having even such a program on my computer.

  Thanks for your time and advice.

  Pete C.

  Hello

  There are many applications that provide a speed temperature and fan of the computer. These applications allow you to check the temperature of the computer, set the speed of the fan and discovers also taking the tension of every component hardware in your computer.

  These applications are not necessary to the operation of the computer. However, if you feel the need, you can install them.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope that answers your question.

• Can someone help me with this .bat program?

  I created a .bat program in Notepad. I was wondering how to do, because it's something new I learn and I started yesterday only. So today, I thought I'd do a. But unfortunately, I couldn't get through it, can someone tell me if this is the correct syntax.
  BTW, the problem was, once the menu main departure happens and when I press 1, 2, 3, or 4, nothing happens and it closes abruptly. The PROGRAM GOES LIKE THIS:
  
  

  • off @echo
  • color 1F
  • title age identifier
  • 
    
  • : menu
  • CLS
  • Welcome to the identifier of the age of echo
  • ECHO, what is your age?
  • Echo 1) under 18
  • Echo 2) equal to or less than 18 years old but less than 60 greator
  • ECHO 3) 60 greator
  • the echo 4) output
  • define opta / p =
  • 
    
  • If opta % = 1 then goto minor
  • If opta % = 2 then goto adult
  • If opta % = 3 then goto Senior
  • If opta = 4% then goto bye
  • 
    
  • : Minor
  • CLS
  • You are a miner of the echo
  • echo return? (y/n)
  • Set /p backa =
  • 
    
  • If menu = % backa can goto
  • Backa % = n If then goto bye
  • 
    
  • : Adult
  • CLS
  • You are an adult of the echo
  • echo Go Back? (y/n)
  • Set /p backb =
  • 
    
  • If backb % = menu there then goto
  • If backb % = n then goto bye
  • 
    
  • : Senior
  • CLS
  • You are a senior echo
  • echo Go Back? (y/n)
  • Set /p backc =
  • 
    
  • Backc = menu % if there then goto
  • Backc % = n If then goto bye
  • 
    
  • : bye
  • echo BYE!

  
  

  PLEASE HELP ME AND THANK YOU IN ADVANCE!

  To use variables created in .cmd script, you must add the command "SETLOCAL" before.
  Also you do not use good operator "==" in the construction of the IF command to compare strings and there is also no "then" keyword in the construction of this command.
  E.g.
  ::
  off @echo
  setlocal
  echo what is your favorite food?
  Set /p food =
  If food % == fried echo Wow! I also love food %!
  ENDLOCAL
  pause
  ::

  Output:
  What is your favorite food?
  Fries
  Wow! I love the fries too!

  You can check for more information on the syntax with and controls:
  cmd /?
  Or
  Help
  
  

• Help with printing from DOS programs

  I use Visual dBase for some shows and I have a problem with printing from there.  I can print programs Windows and internet but not Visual dBase.   Does anyone know a solution to this?

  Hey, Tsalagi.

  Based on a quick search, I found two programs that might interest you: at least some say that this allowed them to print from DOS in Vista applications.

  I hope this helps!

• Need help to identify the Magnifier program in "programs," so I can uninstall it.

  I tried to play a movie on my laptop and told me the resolution was off and he couldn't play. Then I learned that a magnifying glass program had already been installed, and I had to uninstall it. However, as I'm not one who has installed, I can't find it in my list of programs. Help, please.

  Ideas: H

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Magnifier is a part of the Vista operating system

  You cannot delete but you can disable it.

  http://www.ehow.com/how_5619980_disable-Magnifier-startup.html

  How to disable a Magnifier on startup

  See you soon.

  Mick Murphy - Microsoft partner

• help me with the dep program

  I have problems with the dep program my wife likes to talk to people on facebook. but he started it after a few seconds, add something about ons in help. I'm not good with computers

  Hello

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack
  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.
  
  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet Explorer 8
  http://support.Microsoft.com/kb/956197

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Help to install my Acrobat program on new computer

  Adobe Acrobat Pro

  9.0

  Win

  I bought this program years ago and need help on install on my new computer. Any help would be appreciated. Thank you.

  You install programs exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -Membership questions and problems https://forums.adobe.com/thread/1146459

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  -except, now more direct http://prodesigntools.com/adobe-cc-no-more-direct-download-links.html

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)