help me with the dep program

Similar Questions

• How can I measure the length of the lines written with the Paint program?

  I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

  Hi Ralph,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the name of the paint program?

  2 have you tried to install the software of paint in Windows 7?

  3. are you able to install it? If this is not the case, do you have an error code or message?

  4. in what version of Windows was fine paint software work?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• can someone help me with the link to download hp2050 print drivers that are compatible with windows 8.

  can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.

  Hello

  The installation program "Full Feature" can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4132&product=4027469&sw_lang=

  Kind regards

  DP - K

• Hello! Can someone help me with the address of repair service for Palm TX?

  Hello! Can someone help me with the address of repair service for Palm TX?

  Good luck and please, let us know here how it works for you.  We like to know current resources, which can help to solve the problems of people with these older devices.

• I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  Hello

  Main objective of this forum is on Microsoft Products only.

  I suggest you to contact the support of Audacity for more direct action on the issue.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• Clouds (can someone help me with the error code 214?)

  can someone help me with the error code 214?

  Hello

  Reference:--

  Error code 214

  Error in downloading, installing or updating Adobe Creative Cloud applications

• help reqd with the cmdlet "get-customattribute.

  Hey all

  Can someone help me with the cmdlet above pls?

  What I'm trying to do, it is all simply do a search in our VC against some "custom attributes" and confirm the virtual machines associated with them.

  (i.e. custom attribute 'RED' has a servers VM called "SERVER1, SERVER2, etc.")

  I tried to find objects associated with this and all I get is the following objects:

  ServerId
  Server
  That is to say;
  Name
  TargetType
  UID
  Customer

  So, how can I use these to get something that again relates a servernames VM?

  As usual - thank you very much in advance for your help

  Munster99

  Of course, try it like that

  Get - VM | Get-Annotation - CustomAttribute "red" | Where {$_.} Value}

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• As a gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version for the same product against the new upgra

  I have RECIVED YEAR EMAIL FROM ADOBE AS: as gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version of the product, even against the new order of upgrade"IS this UPGRADE FREE AND CE WHO SHOULD DO, HOW can I HAVE THIS UPGRADE?

  HOW I CAN PLACE THE ORDER AND IS IT FREE?

• I bought Photoshop 1 year... + _, I paid for it but I can't work with the tis program, I need some instructions or a book. Please help me

  How I use Photoshp.I bought the program in the last 10 months, but I don't know haw to use

  Hi pedrov34562440,

  You can go through the tutorials to learn how to use the Photoshop program:

  https://helpx.Adobe.com/Photoshop/topics.html

  http://TV.Adobe.com/product/Photoshop/

  Kind regards

  Claes

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• Create a file with the installation program structure

  Hello

  I am trying to create a .exe of my program and it gives users, then helping them install the engines of execution (labview and Visa), finally, I create a few folders on desktop there and add a couple of fichiers.txt/.ini and .bat to these folders. The user then goes through some initial configuration to tell the program to use these files/folders for data entry and record data in this place.

  I want to make this process much simpler by using the installer of labview, I can get this to install my program and all necessary computer execution engines, target but I express this to create the folder structure on the desktop of users and then saying my program where it is. I think I am only telling my program the path of the file of these folders created may be a little complex, but it would be nice to have.

  I'd be happy to create just the files on the desktop and adding the fichiers.txt/.ini/.bat. Any help with this will be appreciated

  Thank you

  Of course, here it is saved back to 8.2.

  Have fun!

  Shaun

• installed no comm with the pilot program

  Hello

  I have developed a small program DAQ in LabView (2013) for a "quadrupole mass spectrometer (MS) Extrel" using the very nice company LabView driver provided.

  The mobile developer is a win7 x 64 system with LabView2013 Pro. The soft Extrel is installed, the portable computer can communicate with the instrument of Ms. The program works on the mobile developer of its VI, from the EXE version and I also did a version of the installer and it works too.

  The portable target is also win7 x 64 with no LabView installed. I have included the LabView2013 execution engine in the first version of my Installer, and I installed it on the target computer.

  When I run the program installed, it launches the native software from 'ExtrelMerlin' as it should be, but from that point to the structure of the event (see the sample driver: 'Panel_Tune Display.vi', 'ScanDataCluster': the value changes in the event structure) which should get the data (for example in every 2 sec) driver is not triggered , the program hangs, and when I go out there, it closes without error...

  I have some info about this driver from LV:

  • The pilot project LabVIEW uses event callback functions to retrieve information from the Automation Server COM Merlin. This feature is not available in the Base of the LabVIEW Development System. You need the complete development system LabVIEW to run this project.
  • The LabVIEW driver uses Merlin Automation COM Server (which will be installed and configured in the configuration of the installation of the software of automation of Merlin) to access data analysis and instrument control. A custom DLL (\Extrel MerlinLV\Public\Bin\ Extrel.LVDataAdapter.dll) is used by VI files to convert data COM to compatible data types LabVIEW structures.

  In the compilation of my installer options, I see that "Extrel.LVDataAdapter.dll" is registered in the dependencies. I wonder why my installed program can obtain data from the COM server on the laptop of developer (with the dev. environment LV 2013 Pro), but not on the laptop with the runtime target of...? I should explicitly include the dll in the build options? Given that the portable target only engine of execution installed?

  It would be wonderful if someone with experience could tell me where to find the source of the problem...

  Thank you much for the help!

  Here you can take a look at the official instr.lib driver of the MS:

  https://DL.dropboxusercontent.com/u/8148153/labview_Extrel_driver.zip

  I got it, the experianced bug is related to some subVIs depending on the environment in the LabView project, which came from the company:

  1. the LabView code begins to get data of spectrum at each scan time that after setting some parameters via LabView in the mass spectrometer software. I'm not in depth, why it works like this, but that's what I know.

  2. so I realized that when I raise an event, what should define a parameter in the native MS software via a chain drive macro (sending a string on MS software through the driver interface) is not it. I checked the format of the string, which is sent to the external software of LV, and I started hitting my head on the table...

  The programmer who developed the code did not have the double number--> regio of conversion of digital channel independent. Since the spectrometer of the native software only accepts the string macro with numbers command using the decimal point, the software just couldn't interpret it command as valid because the laptop targets had German Windows with ',' decimal mark... The laptop the developer had English settings, so he worked there.

  I'm lazy to correct all these errors in LabView code, so I just changed the brand to the decimal point '. ' in the mobile target and voala: everything works

  And I thought there is a very difficult bug, I have to deal with that

• can someone help me choose the right program to open my file on the desktop?

  Try to open the game of chess. It prompted me to choose another file to open chess game of Titian. So I did it by clicking on the internet window explore. now all the progress or files on my desktop changed for symbol (e) of the exploring on them and I can't open them. I don't know how to get it back. Can someone help me?

  Hello

  I would like to know the operating system you work with.

  Method 1) when you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2) in case if it does not help, you must change the associated file. To change the file association for a specific file, you must first display the properties of the file.

  1. You can view the properties of a file by selecting the file and choosing 'Properties' in the file menu. Or you can simply right-click on the file and select "Properties" from the context menu that appears.
  1. To change this file association, click the button change.
  1. You are given a list of recommended programs to open the file, as well as several other programs on your computer. The recommended programs are programs that Windows knows is going to be able to open the current file type. For this reason, choose a program from the list of recommended programs is a good idea. You can choose a program from the list of other programs, but the file cannot open.
  1. You can change this program opens all documents of a certain type of file, and then click the checkbox "Always use the selected program to open this type of file."
  1. Click OK

  Check the link for more information:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  It may be useful