Help! Network of undead!

Similar Questions

• Need help network!

  We are a House of Apple? 2 iMac, MacBook 2, 1 MacBook Pro, iPhone 4. I have an AirPort Extreme and an airport express Network Extender. At one point, some of our phones or computers cannot access Internet. See the router, they are unable to open a session. I'm not an irritable Apple. I did reset hard in AirPort Extreme. I tried a number of things, but the problem seems to be growing.

  My equipment is:

  iMac 21.5 "end 2013

  3.1 GHz Intel Core i7

  OS X 10.9.5

  iMac 21.5 "end 2011

  3.06 GHz Intel Core 2 Duo

  OS X 10.6.8

  iPhone 6 +.

  iOS 9.3.1

  iPhone 6 s

  iOS 9.3.1

  iPhone 6 s

  iOS 8.4.1 (update needed)

  iPhone 5 s

  iOS 9.3.1

  All components see the router but will not have Internet access. Sometimes I get a message on an iMac that says, "another device uses this IP address. Try again later or change IP addresses. ". I have also a message that indicates the IP address is assigned manually. I have never manually assign an IP address. I could really use some help here. Don't forget, you talk with the novice.

  You have not thought about it, but the "modem" which provided you your provider of Internet Service (ISP) may be the culprit. This is because it is quite common for ISPS to limit the number of devices that can connect to the Internet in a given "modem".  A common limit is 5-6 devices.

  Is is possible to communicate with people of support at your ISP to ask them...

  (1) is there a limit of 6 to 8 devices on the modem they received for you?

  (2) if so, ISP support people can change this limitation to allow more devices to connect... Ideally, at no additional cost to you?

  Looks like you probably need at least 15-20 connections available... one for each device and 4-5 extra to help prevent conflicts.

  If you could provide the number of brand and model of the device that you call your "modem", let's get a setup guide or manual to learn more about the features of the device.

• Help, Network 2 appear when start the computer and not connect to internet.

  I have a problem with the network on win7. I have a modem and router wiless. I connected through router wiless. Currently I change the ip address of the router, and the problem occur. 2 apprear and ip network, change default gateway ip address of the router and I can't connect to the internet.

  I don't know for this problem

  Hello

  1 what happens exactly when trying to connect to the Internet?

  2. you get any error message?

  I suggest to follow the steps provided and check if it helps.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, then try the steps from the link.

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• Help: network access lost after relocation of the host

  I am running Ubuntu 14.04 in VMWare Player. The operating system is Windows which I just reinstalled. Problem is that now the Ubuntu VM has no connection to the internet. In the virtual machine, network adapter settings, the setting was NAT. If I changed it to Bridged, that would not work either. In Bridged mode, if I check 'State of physical to replace network connection', that still does not work. If I click on "Configure adapters" mode bridged, it allows me not select any host network adapter.

  
  

  I read online that a tool called vmnetcfg.exe could help, but the old ways to get the file (from the Setup file of Vmware) does not work for me.

  
  

  Your help is appreciated!
  

  Welcome to the community,

  you see the virtual card 'VMware Network Adapter VMnet8' when you run ipconfig/all on the host? If Yes, are you able to ping IP address of the guest OS?

  Did you install VMware Player by right clicking the installation package and run 'as administrator '? It is not uncommon that UAC or request a virus scan/point of endpoint protection prevents the VMware Player installation correctly. What VMware services see the upward in the control panel?

  André

• Help networking running ESX (i) in the VM Workstation

  Hi everyone-

  Hope someone can help.

  I have ESX (i) running in the VM Workstation on my laptop. My problem is that I can't move from my laptop to the domestic VMs. The route correctly on VMs inside and I can communicate back and forth with ESX just cannot access the internal VMs from my laptop. I can ping the default gateway of my laptop workstation VM virtual network editor implements.

  -On promiscuous mode

  -Tried several options with nic, vSwitch and VM workstation network Editor.

  Any ideas on how to Setup network for this config? Goal is to be able to RDP to internal VMs.

  Thank you

  Jason

  This should be pretty easy - please show a screenshot of your network virtual Editor settings.

  Here is all I have to do on the ESXi vmnet0 for example ethernet card

  the host can have the IP 10.0.0.1, the ESXi then takes 10.0.0.2 and the nested VM gets 10.0.0.3
  I don't have to manually set routes at all

  It should also work with vmnet0 and DHCP for three - assuming you have a DHCP server that is connected to the bridged the host network adapter

  during troubleshooting, turn off the firewall host and the nested VM

• Need help networking Lab Manager

  Hello

  I'm having some problems with the implementation of a closed network and to be able to access the external environment of the fence.

  We have a production environment that I cloned for use for testing and development, so we have to our QA and Dev staff to be able to RDP to the virtual machine and to be able to run scripts from their PC in the environment of LM.

  The implementation of models and the creation of the configurations are made and the VM can all see each other on their internal network. All IP addresses are exactly the same, as they are in the production network (IP address of 192.168.11.xx).

  I created a network physical and fenced (192.168.208.xx IP address) by using the static method - Pool of IP and static manual Options, set the default gateway of 192.168.208.1 and linked to a virtual switch on the host computer that is connected to one of our basic physical switches. The port, we connect uplink to switch, is in it's own VLAN and has the IP address of 192.168.208.1 and allow us the IP to the DEV, QA VLAN but not the vlan production by using access lists.

  When I deploy the configuration, network fencing itself and I can see the virtual router using the VI client, however, I cannot ping the addresses or RDP at all on 192.168.208.xx LM Beach assigns to the configuration of the VM. The virtual machine inside the configuration, however, can ping those addresses natted (as well as internal addresses).

  I managed to connect to the virtual router and I noticed that the 2 interfaces are both on the 192.168.208.xx network. We shouldn't be on the internal range of configuration (192.168.11.xx) in order to make routing / natting correctly? What do we lack?

  When close you a physical network, the vRouter resumes the internal address of the physical network IP pool. When you connect a virtual network to a physical network, the vRouter returns to the internal address of the virtual network IP pool.

  It seems to me that your virtual machines were given to the 192.168.11.xx with manual option static, right? In this case, the router will again resume an internal address from the pool of the physical network (think about it, where else would he get all this?). Your needs, create a virtual network with a range of IP addresses in the 192.168.11.xx address space as there are enough IPs for all the virtual machines in your configuration and an additional IP for the internal NIC. of the vRouter use the option "Connection networks to physical virtual networks" while deploying.

  This might help:

  http://communities.VMware.com/thread/250657

• Help: Networking does not work on the Simulator

  Hello

  I downloaded all the versions of the Simulator, until the last 4.7 which has the storm, but for some reason networks do not seem to work on my Simulator. I checked the coverage of the network, said all this coverage is enabled but I am not able to use the browser to go anywhere. Could point out you what I did wrong please?

  Thank you

  got it works by MDS manual start as you suggested. Thank you all, it's a giant step for me, now I can get out of my cave and be connected to the world of my Simulator what a feeling!

• Help network blackBerry Smartphones

  Hey,.

  How will I know if my 8900 is compatible with Orange GSM1800 network that I am currently on O2?

  Thank you

  Hi and welcome to the Forums!

  (1) the specification for your BB page:

  • http://NA.BlackBerry.com/eng/devices/blackberrycurve8900/curve_specifications.jsp

  (2) by asking the new carrier if they're going to allow your BB to register on their network

  Good luck!

• Help network Worktation 11

  I changed the virtual network editor then deleted all NICs except for 1. I then changed the nat to use the following syntax

  9.19.1.0

  / 24

  DG 9.19.1.1

  Then to settings dhcp

  start 9.19.1.200

  end 9.19.1.220

  Let alone rental time

  downstairs

  ip 9.19.1.0 subnet

  subnet mask 24

  restarted the VM one TI picked up 9.19.1.200 which is awesome, I checked that I can ping external and internal to the machine running workstation only. I tried to ping other devices on the network and I can not. Then I got tired to ping the virtual computer to another device with my network, and it is to expire. I've enabled rdp on the vm, off the FW but still can't do anything. The virtual network card on the host using the following

  IP 9.19.1.6

  mask 24

  GW 9.19.1.1

  What keeps me RDP ' ing this virtual machine to another device in my network? The only way I can rdp or ping that vm is if I do it from the host where it is...

  This community is centered on the VMware NSX product.

  Looks like your question is VMware workstation 11.

  You can ask your question on their community: Pro workstation

  Dimitri

• VMware networking help - network bridge / to access the virtual machines form other pc

  I have a computer 'server' that had 4 VM launched on it.

  I need to connect to these virtual machines, all of which have their own IP addresses. I can ping the server or the host of a remote computer, but must be able to communicate with the virtual machines in the remote/client computerss.

  Can anyone offer insight?  I tried to set up an automatic bypass at one of the virtual machines

  Any thoughts?

  Sorry, I'm not sure I can follow you. In any case, what you're trying to do is to configure adaper network of the virtual machine as "Bridged" within the parameters of the virtual machine and then change network card settings in as guest OS:

  IP address: 192.168.1.21 (where 21 must be an unused IP address currently)
  Subnet mask: 255.255.255.0
  Def gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  André

• I have a HP laptop it says my computer is not turned on and not connected to the network, and to of course remote access is enabled. How do these things? Help please

  I have a laptop HP G72, who has always been connected to a wireless network. Now, all of a sudden, I'm not in a row when its in the same room as the router.
  When I try to connect to it - he told me I'm not connected to a network. What is this and HOW can I CHALLENGE IT ALL - Please HELP i can not EVEN READ MY e-mail or SURF THE WEB.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with wireless network in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  1 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• try to connect to the network, need help.

  * - Original title - Help network!

  Im trying to connect to my network, but it won't let me go up. It says im not connected to any network, but im allowed to get on the internet... the network in the try icon has a red x through it, and no matter what im network I can get on the internet but not on the network. What should I do to fix this? I tried all of the troubleshooting steps and he says that there is nothing wrong,

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the full error message you get when you try to connect to the network?

  5. What are all the steps you've tried?

  6. how many computers is connected to the network?

  7 is the computer connected to a home network or domain?

  8. do you have a wired or wireless?

  Method 1.

  I suggest you follow the steps in this article.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2.

  How can I solve the network card problems?: http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems

  Method 3.

  a. click "Start", go to run, type "services.msc" (without the quotation marks) in the Open box and press ENTER.

  b. click on the button continue to check the permission of the administrator.

  c. 'Knowledge of network locations' service right click and choose Properties.

  d. under the general tab, click Start.

  e. click next to automatic startup type.

  f. click OK.

  Restart the computer and check.

  Method 4.

  If the problem persists, please take a screenshot of the window "network and sharing Center" and upload it. After the screenshot of the problem you are experiencing. Click on the link: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-c620-401c-a804-9f6337cd3053

  I hope this helps.

• Limited the scope of network domestic wifi... Help please

  I'm with bell and we have a wifi network at home who sees my computer, but cannot connect too if I'm nowhere, but close to it... but if I connect the router (but without the use of cables) it suddenly automatically connects to the home wifi network. We have several computers at home and all devices are able to connect to the network anywhere in the House, except me. I tried everything, troubleshooting, restart the router from bell, network troubleshooting, update the network adapter card, restart the computer... help :(

  Hello

  Free Wi - Fi and wireless problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path? (The router
  may be the problem, even if the other computers can connect to it).

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Network (NIC) card does not work with DHCP or static IP

  Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

  Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver

• Web SEO programs Nettverk Nettverk Internett Webomr URL Webomr network - address

  Anyone who can help me with an internet conection error, I think that it's some newspapers on the penalty, but if someone is good on mistakes can u pleace give me an email address where I can say moore on mistakes I\m cus if trouble with errors that don't bind that Ioften have need to talk about the problem and how to fix , of course I'll call, nothing shal fall on the programme of assistance :) peace<>

  Moved from feedback

  Hello

  It would be more useful if you answer these questions.

  1 Windows operating system you are using?

  2. what exactly do you mean by "It's a few newspapers on boredom"?

  3. What is the error message you get when you try to connect to the Internet?

  If you have a problem with the connection with the Internet, I suggest you follow the provided article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Kindly get back to us with information, so that we can help you better.