Help on HP ProBook 4515 s
Hi, an organization can help me on this problem, I work in my computer, but after a time (it varies), my computer freezes and don't responde (disk hard led flashes at intervals of one second) after this I forze need reset them, I try to move to a system of automatic Test but I got this message: Test 2 (full)... Error: Read failure, I formatted my computer thinking that windows was responsible for this problem, but the problem persists.
I happy to help
Hello
If you are referring to the test of the hard drive, this indicates your hard drive is defective and must be replaced. Back up all your data as soon as you can and then replace the hard drive.
Best wishes
DP - K
Tags: Notebooks
Similar Questions
-
HP Probook 4515 s does not illuminate
HP Probook 4515 s will normally light after update BIOS to F20. Thing is when I press the power button / stop, cell phone started working, but screen remains blank. HDD led is orange and flashing continuously and CapsLock led flashes 5 times at the beginning which means general motherboard failure. But after some time (5 minutes 4 hours sometimes) it start starting BIOS then windows and continues to work normally all the time until what the computer is put to sleep or shut down. This will never happen before the update to F20 and problem is that now it can not be downgraded by using standard methods. Does anyone know of any possible way to return the BIOS F10, or another solution to the problem?
Your drive "F" could have the folling cases: "."
\Hewlett-Packard\BIOS
\Hewlett-Packard\BIOSUpdate
BIOS file has 3 files: current, new, previous
sp55879 will be extracted in C:\swupdate\sp55879
Copy 68GPI. F:\Hewlett-Packard\BIOS\New TRAY
Copy 68GPI. GIS at F:\Hewlett-Packard\BIOS\New. It should be located in F:\BIOS\Previous.
Copy HpBiosUpdate.efi to F:\Hewlett-Packard\BiosUpdate
I copied all the files from C:\SWSetup\sp59994\BiosUpdate
Do not overwrite the log file.
F.20 should be close to 20/12/2011
The dates of these files will tell you what version.
Restart the computer & it should start the update procedure.
If successful, the new folder is empty, The Current folder & previous record are the same, except previous is now tiny.
-
No control of multichannel sound on HDMI (HP ProBook 4515 s TM500 the)
I have the HP ProBook 4515 s TM500:
Processor: AMD Turion II Dual - Core M500 2.2 GHz, 1 MB L2 cache
Memory: 1 x 2048 MB DDR2
Hard drive: 250 GB-7200 RPM
Display: 15.6 "LED HD 1366 x 768
Graphics card: ATI Radeon HD 4330 dedic. 512 MBProBook was no BONES, so I put Windows 7 Ultimate. Everything works fine, but I don't have surround sound, that that is when I watch DVDs with for example Windows media player, my Onkyo AV receiver is received only stereo sound via HDMI cable, Dolby 5.1 is selected in the audio DVD Setup. DTS does not sound at all. Please tell us what to do.
Display the info:
http://www.AMD.com/us/products/notebook/graphics/ATI-Mobility-HD-4000/HD-4300/pages/HD-4300.aspx
Solved by myself. Download driver ATI for W7 ultimate on HP site. Everything is now w Grou.
-
the upgrade of memory in hp probook 4515 s
Hello
I have a HP probook 4515 s, and it came with 2 GB of memory. I want to 4 GB, but I do not see any place under the laptop where I can open a specific domain and change the memory. It doesn't have the specific points to the memory or the hard drive. Is it possible to do it on this laptop? and how? Thanks in advance!
Raza
Hello
See the service documentation for your model here (page 63, page 72 HDD memory).
-
ProBook 4515 s: motherboard
Hello
My Probook notebook, 4515 s went AMD VGA. And I would like to replace the motherboard.
The Mboard number is 585219-001 Rev: 4.21
If found an other motherboards AMD socket so eBay, but the serial number is different (574505-001 Rev 5:30)
Can I use it?
Can I fit? Or just the motherboard exactly the same?Sancy1981 wrote:
Hello
My Probook notebook, 4515 s went AMD VGA. And I would like to replace the motherboard.
The Mboard number is 585219-001 Rev: 4.21
If found an other motherboards AMD socket so eBay, but the serial number is different (574505-001 Rev 5:30)
Can I use it?
Can I fit? Or just the motherboard exactly the same?Did you look at the pictures of the House and has compared to yours? It is also another faster way to match. And it's the unofficial HP HP support user forum. Otherwise, you will need to find your repair system and in there it will give the list the motherboard that fits in the yourcase.
-
Need HELP with HP ProBook 450 G1!
Hello! I bought there a half year of reseller in my country new HP ProBook 450 G1. I didn't have no reason to go in the BIOS before, but yesterday, I discovered that my computer's BIOS is locked. How can I open it if I didn't not lock BIOS myself and it came already with locked BIOS?
Please if anyone has any information on this subject, I really appreciete it!
Hello
Ask you to call the HP technical support on the phone that it's Business notebook and get this fixed Bios problem
-
Help conflict error ProBook 4730 s
I have a Probook 4730 of s with Windows 7. I keep getting the following error after the computer starts-
hpConnectionManager.exe
Could not load the Assembly:
System.Data.SQLite, Version = 1.0.61.0, Culture = neutral,
PublicKeyTolken = db937bcd44ff139
The application will now exit.
It does not have a negative impact, but it is annoying getting this every time you start. Thanks for any advice on how to solve this problem.
Click programs and features, and find and uninstall the HP Connection Manager software.
This should stop the message from happening. If you need the software to make your wireless internet connection, you can download the latest version of your laptop support portal and reinstall.
-
ProBook 4515 s: W10 and Starter gel
I had a few of them, installed w10 x 64 but they all freeze at startup. A new power make them work again, but each time their initialization first, these latops freeze at startup when I see the windows icon spinning.
I checked the log and found mistakes as whe recorder, hard core unrepareble processor error.
Anyone who can help you with this?
I feel the same on my DV7 laptop freezes during startup. (W10 on PC is oke)
On the net I found someone with the same problems and it has disabled the "quick start" in the stettings of power.
Today I did the same thing and I have yet to see if it works also on my laptop.
http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-Windows-10-a.html
-
ProBook 4530 s: Probook 4530 s Ati drivers on w7?
Hello, this is my first post.
I write here looking for help with my Probook s 4530, I am user of windows 7 and I'm reinstallin the sistem of exploitation and the drivers, my sorprise isn't that of drivers for ati on w7 for w8.1. .. long it was ati driver for w7, I find it incredible that there are drivers a few years ago and now there is not even the old drivers for ati, I read that for the Probook laptop work your drivers, so no way with ati official driver, is true?
We I can find it now?
Are drivers for w 8.1 compatible with w7?
I was lookin for help on google and I found Unified Leshcat Driver
is my plan B, but I prefer to install the hp drivers.
Thanks in advance
Hello:
Unfortunately, there is a major problem with the pages of business support, and many drivers are missing many models.
HP is aware of the problem, but there is no timetable for a fix.
If someday I hope in the not-too-distant future, they will receive all the drivers in the support pages.
Given that the switchable graphics of amd driver is the only one that you can use and which is one of the missing pilots, cannot do anything until HP gets this driver on the support page.
-
HP Probook 450 g1 problem of audio services!
I need help! HP probook 450 g1!
Here is the picture with the problem - http://www.bildites.lv/viewer.php?file=0nabtxxced295sboqans.jpg
Just when I try to start windows audio its shows error 1079 you account specifided for this service is different from the account specified for other services running in the same process!
Hello
Try the following.
Right-click on the Windows Audio service and select Properties.
The log tab.
Fill in the radio button next to "this account.", and then type Local Service
Clear the password fields, then click on apply then Ok to save the change.
Kind regards
DP - K
-
HP 4510 laptop: my laptop has a battery inside as most do?
My laptop has a battery inside as most do? -to record the time settings and the bios?
I replaced one for a friend who has a toshiba, it has an easy access, compartment, but this 4510 s did not have such a place - unless it is under the large battery coming out.
BTW - where is a good place to buy a big spare battery for it - the one I have is shot.
Your computer provides the RTC (cmos) battery.
See Maintenance and Service Guide - Page 35
Item #16 is the RTC battery
Item #23 is the main battery (Page 42)
Part number:
8 cells, 63-Wh for use in computers with screens 15 inch 535753-001
6 - cell, 47-Wh for use in computers with 15-inch poster 536418-001
6 - cell, 47-Wh for use in computers with 14-inch poster 572032-001
When you buy the battery has much to do with where you are on the planet.
If you have access to online stores and delivery, you can buy the battery where that reference numbers are available. Many online auction sites provide cross-references to the reference numbers. For optimal (and safe) performance, it is recommended to use the HP parts in your HP computer.
Excamples:
Part number to surf for the HP 535753-001 parts
535753 001 Battery (primary) - 8-cell lithium-ion (Li-ion), 63Wh, 2.2Ah ====================================================
Excerpt:
When you need a replacement HP 535753-001 battery for your laptop or notebook PC, you need the power of High Performance of LB1. It is the most profitable and sustainable computer available on the market today.
NOTE: PLEASE CHECK YOUR BATTERY PART NUMBER AND VOLTAGE TO ENSURE YOU have THE CORRECT one FOR YOUR LAPTOP BATTERY.
Compatible models:
Laptop HP ProBook 4510 s | Laptop HP ProBook 4510 s (ENERGY STAR) | Laptop HP ProBook 4515 s PC | Laptop HP ProBook 4515 s PC (ENERGY STAR) | Laptop HP ProBook 4710 s | Laptop HP ProBook 4710 s (ENERGY STAR)=====================================================
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
System partitions and upgrade to Windows 7, Linux
Yesterday, I bought my first CV - ProBook 4515 s model with SLED 11 Linux preinstaled. Given that I'm not familiar with Linux systems first thing I did was to install Windows 7.
My laptop came with 4 partitions that is formatted in a file system that Windows does not recognize. I'm guessing a partition for installing Linux, two of them are system (HP_TOOLS and HP_RECOVERY) partitions and the fourth was just an empty disk. So I formatted the fourth partition and installed Windows 7.
The problem is now that I am out of system partitions, so can not access other software preinstaled and QuickLook. I tried a single partition format and rename it to HP_TOOLS and then tried to install QuickLook v. 3 but the facility reported that my system has not been supported? I don't want to mess with the other partitions in the fear that I could remove the BIOS, but want to sort this mess up and would certainly like to have some of the options that is is installed with the system.
Any suggestions?
Message edited by Martine on 14/10/2009 14:07I think that the HP_TOOLS and HP_RECOVERY partitions are formatted as ext2 or ext3 file system, Windows cannot read. It can only read NTFS and FAT32. There is no way I can think to convert the ext2\3 to NTFS without keeping the integrity of the system. In addition, the files are all intended for linux and not Windows. He has makes no sense to do that. That said, I'm not sure if your laptop has Windows 7 drivers now.
-
Photosmart 6510 - no computer"found" - "Scan to computer" not activated
Hello
With the help of HP Probook, with Windows 7 Professional. 64 bit.
My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer. I get the following message:
"No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.
I uninstalled the software and reinstalled again. When reinstall it wonder "Enable scan" I agree.
Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.
Any suggetsions would be welcome.
TX, Kurt297
Hello
Please, download the following tool and run it on your computer:
http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe
Hope he will give some answers if not reinstall full feature software and drivers from following link:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336
Kind regards.
-
Windows 7 activation key has expired
Separated from this thread.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - V9488 - FGM44-2C9T3
The Windows Product Key hash: rmk1OjF0iZq7gQoRmEcpnJHr0oc =
Windows product ID: 00426-OEM-8992662-00010
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {50013620-3977-4A07-A9C0-3268E3811470} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7600.win7_gdr.150318 - 1623
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{50013620-3977-4A07-A9C0-3268E3811470} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 32 *-*-*-*-2C9T3 2 S-1-5-21-1289139080-2386145371-2360473518 Hewlett-Packard HP ProBook 4515 s Hewlett-Packard 68CPP worm 00426-OEM-8992662-00010 . F.06 20100125000000.000000 + 000E8BA3607018400F4 0409 0409 W. Africa Central Standard Time(GMT+01:00) 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600010-02-1033-7600.0000-0012009
Installation ID: 015423671066577705596975317144552474581093788350216463
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 2C9T3
License status: licensed
Remaining Windows rearm count: 3
Trust time: 15/06/2016 04:02:11Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current Hash HWID: MAAAAAEAAQABAAEAAAACAAAAAwABAAEAeqhIKdz5aJTmNp7o6kW0r + K81xhdeCo.Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC HP 0944
FACP HP 0944
HP HPET 0944
MCFG HP 0944
SLIC SLIC-MPC HPQOEM
SSDT AMD PowerNowIf you see the following in the report about the Mismatch file, follow the steps to download the patch appropriate for your architecture of Windows 7:
The following files are available for download from the Microsoft Download Center:
Update for Windows 7 for x 86 based systems (KB971033)
Download the update for Windows 7 for x 86-based systems package.Update for Windows 7 for x 64-based systems (KB971033)
Download the update for Windows 7 for x 64-based systems (KB971033) package now.Install the update to see if it corrects the problem.
-
HP Elite Probook 2570p l: HELP... error 0xc000000f
Hello
While I was with my laptop, it went off suddenly and would not start again. I got an error 0xc000000f and I was asked to insert the windows installation disc, and then restart the computer. I did this and tried to repair windows, but nothing happened. I even tried to connect (bcd) startup with windows files, but I could not find the usual windows, instead files, I found this d:\$window~BT. So now, my computer does not start and does not have the usual windows file. What I have to do.
Elite computer 2570p laptop HP Probook
Product model C9E79UC
I don't have the reloading DVD (2 drivers) and one for Windows completely reload 3.
Help will be appreciated. Thank you
Hello
I find it strange... I think if you live in Australia, and if you bought the computer from the Australia, you must contact the HP support for the Australia. I guess he must have occur an error and you should talk to the HP support for the Australia, not for US.
Yes, it is understandable that the HP support we ship records in Australia, but Australian support HP should be able to advice.
HP has different policies and practices of different countries. In some countries the discs (recovery media) is provided by HP partners for the country.
I suggest that you contact HP Australian support and insist to have local support because you live in Australia and the PC is purchased by the Australia.
You can also check with local partners of HP:
> > http://www8.hp.com/au/en/store-finder/find.do?bs=SR2 & type = reseller
Search for Melbourne, Australia
Choose 'expertise Partner. "
You should end up here with the list of the local partners of 20 companies.
Let me know if they can provide you with assistance. If this is not the case, thanks for posting.
Maybe you are looking for
-
I use the iPhone 5 for sometimes and still getting used to it. My iPhone 5 is now locked password. I couldn't find a way to unlock the password, reset the phone and install the updates of the application. All support them? Can I get immediate assista
-
Cannot remove kernel.log GB 107
Hello I used OmniDiskSweeper to figure out which takes up space on my drive and found a kernel.log 107GB file. But the ODS is unable to remove it, and when I try to delete through Terminal, I get the following: marian iMac:log $ rm /private/var/log/k
-
I have a state machine in relatively simple queue with enum as my type of queue data. All goes well for several days, but I made a few minor changes yesterday (I tried undo, I've covered everything that thought) and now I have a problem with queue
-
Cannot configure printer; Fails to detect a network or usb connection
Hello I recently got the printer HP Deskjet 3050 a and have been an absolutely terrible time operate. It worked for one night and then disconnected somehow. I wanted to set up a peer-to-peer network since I was in College and do not have a network of
-
LaserJet 1606dn: problem installing laserjet 1606dn
I try to install using hp_LJP1100_P1560_P1600_Full_Solution-v20120831 - 50157036_SMO.exe - installer looks for and finds the printer - I select the printer and click Next, but then, the Setup program hangs (not responding). We have ither Win 10 compu