HP Elite Probook 2570p l: HELP... error 0xc000000f

Similar Questions

• Satellite Pro L300D-20R: displays error 0xc000000f when recovered

  Hello

  I wonder if someone can help me. There are accidents of software in my laptop. I tried to restore my laptop to factory setting, but failed.

  Here's what I did: under the opening of proceedings (F12) to drive recovery HARD, I entered "repair your computer" and then computer show the error 0xc000000f. It came at the very end when I 'C' boot from CD/DVD with windows Vista recovery.

  Any help appreciated,
  Thanks in advance,

  Adam

  Hello

  As far as I know, you have to press F8 to start the HARD drive recovery process.
  Then a new menu will appear where you can choose repair my computer.
  Then, you choose the HARD drive recovery.

  If this is not possible, that it would mean that there is something wrong with the HARD drive or the partition that contains the files / image of HARD drive recovery.
  This might explain why the boot from the CD/DVD drive is not possible.

  Conversely a failure of RAM could be the reason too.
  That's why it of needed to check if these parts.

  By the way; are you able to boot from an another disc bootable Win XP or Linux live CD?

• Problem Boot of Windows 8 error: 0xc000000f

  My laptop Asus primer not.

  It gives me this message
  "Unable to start Windows. A recent hardware of software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc, and then restart the computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  Status: 0xc000000f
  Info: boot your PC Configuration data is missing or contains errors. »
  When I put the disc, it just goes back to the screen, then after a few minutes, the computer will restart and display the same message.

  Hello

  I suggest you try the method described in the following article:

  http://www.kapilarya.com/how-to-fix-error-0xc000000f-the-boot-selection-failed-because-a-required-device-is-inaccessible

  Hope this helps, good luck :)

• UPGRADATION OF 8 TO 8.1 AND ERROR 0XC000000F

  I have DELL Inspiron 7535 with windows pre installed 8 and no cd drive. After downloading win 8.1 on auto, during the up-gradation, boot error 0xc000000f alarm persists. Advice any solution.

  Hello

  Please see following fix and if she could help you:

  http://www.kapilarya.com/how-to-fix-error-0xc000000f-the-boot-selection-failed-because-a-required-device-is-inaccessible

  Hope this helps, good luck :)

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• Windows 8.1 no boot with error 0xc000000f

  Yesterday, I was watching a video and my windows suddenly began trolling. After awhile, I got a message saying that windows has problems and that I should raise them in a small window as it does when a program is not responding. After a few minutes, he tried to restart Explorer (btw my wifi did not work for 5 minutes before that). Finally he stopped and when I tried to start it I got the error 0xc000000f. I used my DVD of windows to try to fix them, but he was stuck in repair disk errors for about 6 hours with no result. I stopped and made a hard disk self test. The rapid stopped at 1% and says replace disk 1. The full test don't even have 1%, then said the same thing. Please help me!

  Hello

  For a better understanding of the question, I would like to know what is the brand and model of the computer?

  0xc000000f error indicates that the boot selection failed because a required device is not accessible. This problem may be caused because of damaged files.

  As the HDD test failed with the error "Replacement hard drive", I suggest you to contact the manufacturer of the computer and test the hard drive if it does not work properly or not.

  Hope this information helps. Reply to the post with the results of the test of hard disk to help you further.

• Portege R830-10 q - Win 10 upgrade - error 0xc000000f

  I have a Toshiba Portege R830-10 q I'm trying to put Windows 7 upgraded to Windows 10.

  When upgrading, he stumbles and goes into a loop of repair to 29% which gives me error 0xc000000f with no way to roll back.

  A clean installation, installs absolutely perfect, but due to rules of activation of Microsoft (possible only via an update unless you buy the product), it is no good.

  Has anyone managed to upgrade the q R830-10 Windows 10 yet?

  I know that's not on the list of approved of the PC Toshiba, but surely there must be a way

  I also have this problem, anyone can give us advice how to fix this
  Thank you.

  Jonathan

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• Error 0xc000000f startup

  Hello. My presario primer not. I ran the self test and get "start up test" Failed "fast hard disk 1" (303). I tried to restore to the factory settings, but get error 0xc000000f and it will not go further. What is the best way to precede.

  Hello

  303 error code would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning and the inability to fill a factory reset.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• help error code: 8024200 D

  Mr President, I have format my laptop. First of all, I want to install the latest update to install sp1, and later it ends with error.please help error code: 8024200 d What should I do to remove this error? I m jst pissed by again and again! Please suggest an easy and appropriate procedure.i also run boot minimum and who does not.

  Mr President, I have format my laptop. First of all, I want to install the latest update to install sp1, and later it ends with error.please help error code: 8024200 d What should I do to remove this error? I m jst pissed by again and again! Please suggest an easy and appropriate procedure.i also run boot minimum and who does not.

  reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Already answered here...
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code-80080005-8024200d-do-not-appear-on-the/eeb6b38a-B0E8-4d80-ad23-acfd8bbedc3c

• Failed to load the operating system. Error 0xc000000f

  Hello!

  I got an error 0xc000000f in Windows and it did not start.

  I have a HP DV6 laptop with a pre installed WIN7 Home Premium OEM.

  I tried to use the LIVE CD of Ubuntu Linux and it works!  So I think this isn't a hardware problem.

  But how do I get a recovery for my WIN 7 disc?  How can I retrieve my previous operating system?

  PS Sorry for my English, I'm from the Italy.

  Prego.

• Please help: error creating files the digital certificate is not valid

  Hello, I have a problem to publish .air for Flash Professional CS5.5 desktop. When I create the certificate (.p12) file, and then click Publish but apparently alert dialog box is "error creating files the digital certificate is not valid. Your certificate has expired the Mar Mar 12 15:34:32 ICT 1963 "How could I do to solve this case and export the only desktop .air file?

  Double post, responded to Please help: error creating files the digital certificate is not valid.

  Locking thread.

• HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f

  My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.

  System information:

  Processor: Intel Core i5-4210U CPU @ 1.70 GHz

  Current processor speed: 1700 MHz

  Memory size: 8192MG RAM

  BIOS date: 20/09/2014

  BIOS revision: M74 worm 01.05

  I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.

  How can we try to repair Windows rather than recreating the image?

  If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.

  Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.

  https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media

• 8.1 Windows fails to start error 0xc000000f

  Hello, I met the same problem as other users but am unable to create a Windows 8.1 USB Installer. I just bought a G2 G430 ProBook. I saved the DCD 2 content on a USB key, tried to start up my laptop using the USB files but failed. I'm still able to use my laptop. Any help would be very welcome, thank you.

  Error message:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  @ChrisGale

  It would be simpler if you did it with a desktop or laptop which has Windows installed 8.1.

  You have a friend who has Windows 8.1 on a laptop and would be willing to help you to create a recovery key?

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• HP ProBook 450 G1: Internal error power - upgrade Windows 10

  Hello

  Today I upgraded my HP ProBOok from 8.1 to 10 and continues to receive a blue screen with the internal power error code.
  Please help me for PC keeps on rebooting.

  Thank you in advance.

  Hello

  Just managed to solve this problem. It seems that all problems with drivers.

  All you need is to:
  
  1. connect in safe mode:

  a. Windows + R

  b. msconfig

  c. start->->-> OK minimal safe mode-> restart

  2 uninstall the drivers

  a. right click on desktop

  b. devices

  drivers graphic network and Uninstal c. - it can be of their

  Try to uninstall all the possible drivers

  d. restart the PC

  3 exit secure mode

  a. Windows + R

  b. msconfig

  c. start-> uncheck Safe mode-> OK-> restart

  Enjoy - hope it helps you all.