Help, please! Atheros AR9002WB-1NG network adapter... Details of the pilot show drivers are digitally signed by Microsoft, BUT?

The message below appears when I click on properties in the AR9002WB-1NG Atheros network card device manager:

"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

BUT under the 'driver '... 'Détails' show ' drivers are digitally signed by Microsoft!

I have received responses on this issue, followed them to the letter and nothing has worked so far.

Hi Jane,

Yes, I'm having a great time. Thank you.

Screenshots that you shared, it's an Atheros AR9002WB-1NG wireless network adapter.

If you do not want to uninstall the old drivers I suggest that you try to update the driver from Device Manager.

Even if it is not up-to-date, it won't bother the driver works.

From the next page

https://www.Atheros.cz/Atheros-INF-file.php?INF=423&chipset=31&system=6

Copy the text from the [version]

___________________________________________________________________________________

___________________________________________________________________________________

So far

___________________________________________________________________________________

___________________________________________________________________________________

Use keyboard shortcuts, it's a file of confectioners.

Copy the text into a Notepad file and save it as netathrx.inf

After saving it GO to Device Manager right click on the Atheros AR9002WB-1NG, , click on the driver tab, now click on update driver, click Browse my computer for driver software, point to the location where you previously saved the netathrx.inf, select the file and click Next.

The driver will be updated.

I hope that this will solve the problem of unsigned driver.

Tags: Windows

Similar Questions

  • Atheros AR5004G wireless network adapter

    Hello

    I own a Toshiba Satellite P30 Bios version 1.30, XP SP2, and I've been very happy with it until recently.

    Since a few weeks I meet from time to time system crash, the computer crashes: does not react on the keyboard, screen freezes and only by pressing the power button for 30 seconds for a total power down allows. Fans spin again. Sometimes, after a such restart on diagnosis (before Windows starts) display the following message can be read: resource conflict - PCI network in the Groove 3 controller. Bus: 02; Feature: 02; Function: 00.
    It is the only PCI card that has my system.

    There was no material added to the system, the message is quite strange. Wait a few minutes and turn it back on it cause do not receive this message. Also helps dismantle the card wireless built-in, wait a second and mount it again.

    When I use the computer connected to the LAN via a network cable, while radio signals are turned off, the problem not more occurs. When I disable the Atheros AR5004G Wireless Network Adapter in Windows, the problem is not to be produced.

    There is no message in the event viewer.

    I do not use recovery Toshiba OS, but Windows XP Professional with Service Pack 2 installed by our system administrator. The same Setup worked without a problem for about 3 months. After that I met the problem I tried to reinstall the drivers and software for the network adapter wireless since the original CD from Toshiba, but not helped.

    I use the Atheros Client Utility version 3.1.2.19
    Version of the driver name AR5211, C:\Windows\system32\drivers\ar5211.sys, 3.1.2.12.

    I saw another user, peter-jaap mentioned on this forum a few weeks earlier the same problem. Any help would be appreciated.

    Kind regards

    Laszlo

    Hi Laszlo

    In my opinion, there is a hardware conflict. You said that you have this problem for a few weeks. Do you have some changes or install software? This laptop comes with Windows XP SP2 home edition, and all the drivers that you have on CD tools & utilities are fit to work properly with SP2.

    It's very strange that for awhile in particular this issue occurred. If you disable the network adapter in Device Manager you can use the card wireless without problems?

    All drivers and tools on the recovery CD are adapted to work correctly with the laptop and it can sometimes be a big problem to prepare the laptop on your own with some specific configuration. In my opinion if there is no solution to your problem, you must contact partner in your country.

  • Random disconnection on Atheros AR9002WB-1NG Wireless Network Adapter

    Hi all

    I have a problem doing my job in the internet due to random disconnection on the map of Atheros AR9002WB-1NG wireless network.
    Are there troubleshooting procedures to resolve these random disconnections?
    Windows 7 Home Premium SP1
    ASUS N43SL
    Atheros AR9002WB-1NG
    Thank you.

    Hello

    Try the steps in the following methods and check the status of the issue.

    Method 1:

    Configure the computer to clean start State to check software conflicts and check the status.

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

    Method 2:

    Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Connection problems with atheros ar9002wb-1ng

    I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

    Hi Jak,

    Welcome to Microsoft communities.

    I understand that the wireless connection is disconnected.

    1. don't you make recent changes that caused the problem?
    2. any message/error code?

    Try the steps in the following methods and check the status of the issue.

    Method 1:

    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    Configure the computer to clean start State to check software conflicts and check the status.
    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

    Method 3:

    Wi - Fi and in Windows network connection issues.
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

  • Atheros AR5125 wireless network adapter does not

    Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

    Any help, please notify!

    JudyB_729

    Judy

    What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

  • Atheros AR9002wb-1ng constantly need reset troubleshooting

    I have a laptop ASUS N53SV card Atheros AR9002wb-1ng. Last week, the connection continues being dropped randomly and reset of the card is the only thing that will fix it.

    I already tried things:
    • Change the channel on the router (it goes from 1 to 11, no difference)
    • Disabling the adapter power management settings
    • The reactivation of the adapter power management settings
    • Install a new driver (from what I could find, I could have done this wrong)
    And finally:
    • Uninstall the card completely and restarted my computer, which he has reinstalled everything from scratch.
    It was the last thing I did to try to solve the problem. It worked for about an hour, but now I have a new problem: troubleshooting tool resets over the adapter, then now, I do it manually each time by the Manager of devices of deactivation and activation (which I do every 10 minutes approximately).
    Do you think this could be a hardware problem? I don't know what to do to solve this problem.

    Hello

    Have you checked for updated firmware for the router?

    Collate ASUStek support, their drivers and documentation online and ask for their
    Forums about known problems. There may be a problem hardware or driver known with
    solutions.

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    Also check with Atheros updated drivers.

    Drivers Atheros WiFi.
    http://www.Atheros.cz/Atheros-wireless-drivers.php

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Satellite L750/052: Atheros AR9002WB-1NG supports only WPA?

    I seem to have a problem with a L750/052.
    I have the latest version of the driver for the Atheros AR9002WB-1NG, which is 9.2.0.316.0.
    I'm trying to connect to the modem/router is a Netgear DGND3700.

    When buying at the origin it would not connect to the wireless network it just kept rejecting the key wireless WPA2 (AES).
    I've set up a WPA (TKIP) network and it recognizes the key but it will just keep stalling even if in the same room to the modem/router.

    To further reading, I discovered a lot of Atheros cards Wireless will not support encryption WPA/WPA2 and WEP, which is much less secure support and wireless manufacturers stopped including it products out there.

    Y at - it a newer firmware that could solve the problem of the WPA or includes support for WPA2 (AES)?

    My other Toshiba has a Realtek Wireless card and no questions.

    Hello

    I found this PDF on AR9002WB-1NG specifications:
    http://www.QCA.Qualcomm.com/media/product/product_75_file1.PDF

    It s mentioned here that the Atheros card support AES, TKIP, WEP security.
    Then you should be able to use AES (WPA) encryption.
    But this map is only 2.4 Ghz

    If you need to make sure that your router is also 2.4 Ghz; This means that you must use the standard 802.11 WiFi B or G (802.11 N runs at 2.4 Ghz and 5 GHz)

    By the way; Frequency 2.4 Ghz is used by other different devices such as microwave, baby monitor, or Bluetooth, so it could be possible that these devices are thus the signal of your Wlan.

    By the way; the latest Atheros divers can be found here:
    http://APS2.toshiba-tro.de/WLAN/

  • Qualcomm Atheros QCA61x4 Wireless Network Adapter driver 12.0.0.116 gives a slow speed.

    I bought aspire V3 - 574 G-54VY a month back. It runs on windpws 10 64-bit. There is a problem with the Qualcomm Atheros QCA61x4 Wireless Network Adapter. Whenever I update the driver to version 12.0.0.116 I face extremely slow internet. But when I go back to the previous version of the driver 4.0.0.115 i.e., the speed is correct. Can someone help me with this issue, because I'm not able to determine whether or not I have a defective laptop. The center of same service replaced the wifi card, but always the same question comes up. Thanks in advance.

    Hi guys Finally I found the problem with the help of a technician

    The problem was with power settings. When the laptop is plugged in, he took the full speed and slow battery mode. The solution is:

    Goto settings-> system-> power and sleep-> additional power settings-> settings of plan (plan selected)

    OR

    Search for Goto-> type Control Panel-> hardware and sound-> Power Options->-> change the parameters of the plan (plan selected)

    Then

    change power settings advance-> adapter settings-> power saving mode-> Set battery maximum performance wireless

    Check your speed now (if necessary reboot)

    I am now using the updated driver 12.0.0.191 and internet high speed is correct.

  • Windows Vista Home Premium Service Pack 2 upgrade of the Atheros AR5007EG wireless network adapter

    I just bought a new device Sierra Wireless mobile hotspot, the Pro of the Sprint Overdrive.  The wifi connection works very well in my PC with the exception of a PC set that I am running Windows Vista Home Premium Service Pack two.  I am told that the problem is with Vista and the Atheros AR5007EG wireless network adapter.  The current version is 7.6.0.164 and it tells me the device Overdrive only with version 9.1.0.328 or higher will.  What I can, and if I can, how to move the driver to the required version?

    Hello

    You can try to update the latest drivers for the network adapter and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    It will be useful.

  • The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems

    It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance.  However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems".  Any help would be greatly appreciated.

    I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES.  Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.)  If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!

  • Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter does not work.

    I have Acer laptop V3-571.

    I have upgraded to windows 8 Windows 7.

    Adapter Qualcomm Atheros AR5BWB222 Wireless Network Adapter is showing work fine in Device Manager, but the wifi does not work.

    When I checked the soft switch in the Pc, swith found to disable the position. Could someone help to solve?

    Well I solved it by bypassing the wireless adapter and buy something external usb nano wireless, it works perfectly now. problem still not fixed however.

    I found a way to fix my network, ive manually uninstalled the network cards, drivers and downloaded the following file "win78 - 10.0.0.75 - whql" of
    http://www.Atheros.cz/Atheros-wireless-download.php?chipset=81&system=6
    and simply installed the driver via Device Manager

    Hope this will help some of you.

    Kind regards
    Stamp of Pieter

  • Changing the settings of the WLAN with an Atheros AR5007EG Wireless Network Adapter running on a Vista computer

    How can I set the preset wlan on ONE for an Atheros AR5007EG Wireless Network Adapter running on a Vista computer.  Currently, the default is OFF and I need to use the Fn F1 to bring up the option to turn it on, Iwant my laptop to connect to my wireless router automatically without having to do that.

    Thank you

    Hi Cath.

    In most cases, it is a configuration in the BIOS of the laptop that will solve the wireless by card.

    Then start the laptop enter in BIOS and look for an entry that configure the wireless to be all the time card.

    Where necessary the manual or computer support site must have the necessary info.

  • How fast is the Atheros AR5007EG wireless network adapter?

    I have an Atheros AR5007EG wireless network adapter in my computer. For six months, we have Broadbank 100Mbit/s in our House. When I call the support (support of the broadband company) they ask me to check if my computer can handle it. How can I check that?

    I think the Atheros AR5007EG is a 802. 11 b / g device. Which would have a maximum speed of 54 Mbps.

    For 100 Mbps, you need a Wireless N - 802.11n device.

  • Atheros AR5007EG Wireless Network Adapter does not

    Hello

    My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit

    There should be a little more characters for your PC model Toshiba laptop.  For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250

    If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.

    Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.

  • Atheros AR5BWB222 wireless network adapter

    I have the ACER ULTRA, 13-inch book.

    After downloading and installing windows 8, Atheros AR5BWB222 wireless network adapter has problems of communication between the pilot and the material with the result that I have no internet connection.

    Since there is no ethernet port, there is no way to connect to the internet to look for a solution!

    I uninstalled and allowed the system to search for the best driver and reinstall.  Same result - no commucication between the driver and the hardware.  Windows 8 wireless driver options are limited to Samsung, Intel, and Microsoft - no QUallcom.

    Is - this problem is causing an incompatibility or hardware driver?

    Barrie

    @Barrie,

    On another PC go to acer.com and download the drivers, then use a USB key to move the drivers for your laptop. There is a certain Win8 drivers available for download on the acer.com support

Maybe you are looking for