help please can't find my store icon to icon on the desktop and other applications

I wanted to uninstall coreldraw on my system, but has been struggling so I heard about the use of perfect uninstaller that I used and it worked. the next time I started my system I discovered that my office, store, and some other applications were missing from the start menu. How I please

Restart your computer several times and see if it comes back. If this isn't the case, then you have a corrupt user profile.

Corrupt user profile:

http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Tags: Windows

Similar Questions

  • Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Than k you

    The user has clicked on Vista, the little lock at the bottom of the START window.

    Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Thank you

    Hello

    Click the account icon that was locked and enter the password IF you know and otherwise:

    Try Safe Mode - several times, press F8 that you start. The Admin account there is no default password
    so unless someone has changed, you should have access there. Then Control Panel - accounts - users
    Manage another account - use this down your user account (to the lowest level) APPLY/OK
    then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
    Then fix the password in your usual account. Do not forget to leave your account administrator if you
    wish.

    If no joy Mode without failure:

    Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
    then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
    Then fix the password in your usual account. Do not forget to leave your account administrator if you
    wish.

    Make another Admin account with your password and use it to fix the others if necessary. (just for
    repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

    DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
    not that an Admin account that is not used except for testing and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    ---------------------------------------------------------

    If necessary:

    Ophcrack is a free Windows password cracker based on rainbow tables.
    http://Ophcrack.sourceforge.NET/

    How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
    http://www.WikiHow.com/reset-a-Windows-Vista-password
    YouTube video on the use of the Trinity rescue Kit
    http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

    Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
    http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

    Offline NT Password & Reset Editor
    http://home.eunet.no/~pnordahl/ntpasswd/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows 7 icons on the desktop and start changed to dat file

    Original title: Windows 7 icons on the desktop and Start Menu problems

    I am running Windows 7 Pro with service pack 1 and all the icons on the desktop Start Menu has changed into something that resembles a dat file and when you click on it, they are trying to run a download would be and asks where I want to save them. Symantec Endpoint, Microsoft Security Essentials, or AVG will find viruses or problems with the computer. I spoke with the technology of Windows and he sent me the link to this page.
    I've never seen anything like this.

    Hello

    It can be disappointing when all the icons on the desktop and Menu start modified in a dat file. I understand the inconvenience.

    You can try to rebuild the icon cache and check if it works properly.

    Click Start, click Control Panel, and write in the box search folders options.
    b. now, click on Folder Options to open and select folders and hidden files (dot).
    c. open a Windows Explorer window.
    d. go to C:\Users\(User Name) \AppData\Local
    e. right click on IconCache.db and click on delete.
    f. click Yes to confirm the deletion.
    NOTE: This deletes the file to the trash. It is safe to empty the trash when you are done.
    g. close the window.
    h. emptying the trash.
    i. restart the computer.
    j. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date.
    NOTE: If for some reason, IconCache.db isn't there or the size has not changed, then you can just restart the computer again. You may need to restart a few times in some cases.
    k. icon cache will be rebuilt.

    Hope it solves the problem. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Icons on the desktop and start menu changed

    When I download iTunes all my icons on the desktop and start menu change to itunes and all the icons open itunes. With the help of Windows 7 on a 32-bit Machine

    Hello

    I suggest to follow the steps provided and check if it helps.

    Method 1: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

    http://support.Microsoft.com/kb/950505/

    Method 2: Change default programs using Set Program Access and computer defaults:
    http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

    Changing the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

    Method 3: If the problem persists, then try to uninstall iTunes from the control panel and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Hope this information is useful.

  • Save the position of icons on the desktop and restore if necessary in windows 7

    How can I save the position of icons on the desktop and restore if necessary under windows 7 ultimate x 86

    You can save custom desktop icon position and restore it if necessary, using the Layout.dll of Microsoft shell extension. REF:Save and restore available to the icon on the desktop in Windows NT/2000/XP/Vista/7. Or try DesktopOK Freeware - save and restore the desktop icons.

    Ramesh Srinivasan . The Winhelponline Blog
    Microsoft MVP, Windows desktop experience

  • Through white icon on the desktop and Windows Explorer.

    Hello

    A lot of my icons on the desktop and Windows Explorer is more appear a normal icon, instead, they show a white square.

    Here is a screenshot of my 3 hard disks with shortcuts on the desktop.

    http://i293.Photobucket.com/albums/m...blankicons.jpg

    I tried to solve the problem by doing a rebuild of the cache icon but that did not work.

    Anyone would be able to help me solve this problem?

    Thank you.

    Hello

    Have you used the utility changes or registry to remove the shortcut arrow overlay?

    First make sure the utility is uninstalled and the registry change is removed.

    Try this and check if that helps:

    1. right click on a box empty desktop and select Customize.

    2. click on adjust the resolution of the screen.

    3. in the drop-down color menu, select medium (16 bit).

    4. click on apply.

    5. when Windows you asked if you want to keep these settings, click No to restore your 32-bit color depth.

    6. restart your computer.

    See also the mentioned thread link below for workaround for this problem:

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6213e892-D4F8-4E77-b5d9-1ce048e8859b  

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • It cannot open any programs they all have the same icon on the desktop and start programs... why?

    All of the icons on the desktop and on the start menu have the same icon and will not open... I have new sony computer with windows 7... I tried to move music to a file to burn a cd, he asked what program I should use to open them have all records have the same program and open the habit... I don't run a virus, malware, none of the infected files.

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you try the steps from the following link:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
    http://support.Microsoft.com/kb/950505

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    Method 2
    The issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  • HELP Please: can't find missing drivers on the HP website

    My computer is missing 4 drivers (network controller, Ethernet, PCI device and SM bus controller controller), including the first two (I presume?) stop to connect to Internet.
    I downloaded what looked like the appropriate drivers for the ethernet controller network off-site Internet HP on another computer and transfer files with a USB key.
    Then I opened the files and everything seemed to go well - installation wizard arrives, I accept the user agreement, it seems to start updating - when he suddenly stops and a notification will appear that says "your system does not meet the minimum requirements for this update. Update has been canceled. (9996).

    I would like first of all to understand what are the requirements may not be satisfied with my computer, and then how to find exactly the right drivers necessary to connect to the Internet.

    I'm running a new (although not the latest version) copy of win7 and have a new hard drive which I assume is at fault for missing drivers. It is a g6 - 1232ea portable Pavilion.

    Help, please. See you soon.

    You are the very welcome.

    Yes, you can download on another PC.  Just download and copy on a USB or burn it to a DVD.

    Here is the link for the driver for the wireless card.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105197-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197301 & sw_lang=.

  • Icons on the desktop and start used menu opened directly unless I use 'open with' program HELP PLEASE!

    Hello I have a huge problem and need HELP! With all the shortcuts I have on my desktop and icons that I have in my menu it start seem to be a problem. It allows me to open any programs unless I choose a program to start with. Now, I open ALL my programs with the "Open with" menu and its really a lot of time. Also I am not able to start all of the office programs, that it says I need set associations but I checked control panel and I couldn't find that. I tried the FIXIT Windows program on other issues ive had in the past and I was wondering if maybe theres a fix for the problem im having. IM currently on vista Home premium. and I really hope theres someone out there who can help me!   Thank you for your time...

    Hello

    Try the system restore before it happened.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    Its control panel - backup and restore center - left upper repair Windows

    SO which opens also to use the below to execute.

    Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN

    or use start - computer or Windows Explorer to navigate to

    C:\Windows\System32\rstrui.exe

    Top - right click RUN AS ADMIN

    =====================================

    To run a particular program until get them you all back to the normal fair use start - search and type in the
    program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
    program, and run it from there.

    Define your main program associations, and then you can edit any type of file to the correct program.

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

    How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

    How to view and change an Extension of filename on Vista
    http://www.Vistax64.com/tutorials/103171-file-name-extension.html

    How Unassociate a Type of Extension file in Vista and a utility to help
    http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

    Restore the Type Associations by default Vista file extensions
    http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How can I get people back icon on the desktop?

    Original title: LOST THE PEOPE ICON ON THE DESK TOP - how DO I GET it BACK?

    LOST CONTACTS ON THE DESKTOP ICON - HOW CAN I GET THAT BACK?

    THIS OCCURRED WHEN I ENTERED THE INFORMATION ABOUT THE WEATHER IN MY AREA AND NOW I HAVE AN ICON OF THE WEATHER INSTEAD OF THE CONTACTS ICON.  NO PAVE THE WAY TO COATED OR BACK. MY BOY WIN 8 STINKS. I CAN PUT UP WITH AND TRY TO LEARN, BUT MY WIFE WANTS ME TO EMPTY OUR NEW COMPUTER SINCE WIN 8 STINKS. Help, please. Thank you.

    The start screen is up to you to customize however desired.  You can right click on any icon to unpin it from the splash screen, but does not remove the program.  Right click on a box empty and select "All Apps" to see the complete list.  From there you can right click the app and 'Pin to Start' people again to put it back on the splash screen or move.

  • Where can I find my original photo after editing to the organizer and the saiving it

    I am brand new to photoshop elements.  I edited a photo in the editor and saved with a different name.  Now, I can't find the original image.  What happened to him?

    When you work in the Organizer in PSE13, by default you will see a display of thumbnails where each thumbnail is enlarged without text, name of file or details.

    It is a new view in version 13. You can switch the display mode to the old vision "detailed", where the tile is smaller, but indicated with the file name and details if you have enabled this option in the menu "view". To move, use the view menu or the shortcut Ctrl D.

    When you have edited a photo of the Organizer, the new image you created is linked to the original, they are in a "set" version Only the most recent version is displayed by default. When you have switched to the 'detailed view', there is a small triangle on the right of the thumbnail. Click on it, and all versions will be displayed next.

    Is that what you want?

    If you have created a set of version, a small icon should appear on the top of the page thumbnail even country in no detailed view.

  • Can I remove install.exe icons on the desktop without software uninstalling itself?

    I downloaded an .exe file driver and software and 3 updates on the HP site for my HP printer that I just installed. I installed all 4 downloads that I placed on my desk and the printer works fine.  My question now is to remove these .exe icons in my office without it uninstall the software or do I have to make a case for them and send them the file and keep them there?

    Of course, you can, this will not affect the printer. But I do not recommend to keep it somewhere as a backup to re - install.

  • Windodws 10 - the icon on the desktop and dashboard Office somehow disappeared. How to make a comeback?

    Windodws 10 - somehow the creative cloud desktop icon and desktop dashboard disappeared. How to make a comeback?

    Hello

    Please reboot the machine and check.

    You can also view icon cloud creative, absent from the menu bar of my Mac!

    Hope that helps!

    Kind regards

    Sheena

  • Move the shortcuts / icons on the desktop and folders

    IN XP, there's your desktop / folder option to rearrange icons by: name, size, etc.  Also auto arrange, align with the grid, etc.  Or you could reactivate all the icons apart and put it where you want.

    Where is the equivalent to that found in Win7 pro?
    Thank you

    Hello p_kerr,

    Thank you for visiting the Microsoft answers community.

    The ability to disable the reorganization within folders has been deleted by design in Windows Vista. You can use the Sort by, Group by and display options in the contect menu.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • With regard to creating a desktop shortcut to a Web site. When I drag and drop the icon on the desktop, and then click to open, I get a box 'print' on the site.

    When I double click on the Firefox icon, it brings me to the "print area". What is the problem and how can it be solved?
    Thanks, Jeff

    Thanks for your suggestion. II ended up adding an element of the registry which fixed the problem.

Maybe you are looking for