Help, please! Going crazy trying to connect to the internet!

Similar Questions

• Error 651 trying to connect to the internet

  I am running Win7 Home Premium and and I get a 651 error trying to connect to the internet. I replaced the file rasppoe.sys with an another working Win7 pc, but this did not help. I also tried the same file from a Vista laptop but still no joy of work.

  I also disabled the connection of ivp6 nothing helps

  I use Virgin Media as my ISP access and you connect using a network modem.

  Any help would be appreciated I'm going crazy trying to fix it.

  Thanks in advance

  Is it only started recently? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the McAfee removal of Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Trying to connect to the internet after the failure of hardrive.

  I am trying to connect to the internet after that I wiped recently my hardrive due to the blue screen of death, I use a card of d-link airplus dwl-520 if I need to install some programs that I consider ive got no program on my ill try machine any option avalible please help! If you need more information just ask.

  asz1977,

  As I sad to PCN00B159 go to your computers to build and download the driver to your computer and see if the difficulty of the question.
  Please rate me upward if you find my post helpful. Thank you!

• I just got back my computer to its factory settings... and now I amd trying to connect to the internet

  I just got back my computer to its factory settings... and now I amd trying to connect to the internet but it is windows xp and im lost I tried the installation wizard and I still don't know any help would be great

  Hello

  1. how to access internet through hard wired or wireless?

   
  I suggest you to follow the steps below and check if it helps.
   
   
  Method 1:  You can follow the steps mentioned in the link below to make an Internet connection
   
  To establish an Internet connection
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true
   
   
  Also check out the article below: How to configure Internet access in Windows XP Professional.
  http://support.Microsoft.com/kb/305549
   
   
  More information: You can see the steps outlined in the article below.
  How to troubleshoot possible causes of Internet connection problems in Windows XP.
  http://support.Microsoft.com/kb/314095
   
   
  Hope this information is useful.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• After trying to connect to the internet error message knows unidentified network

  Original title: problem connecting (unidentified network) environment.

  A few times my labtop is big when it connects with the Ethernet cable say: unidentified network
  But when I connect it to an another labtop its connect to the Internet.
  I don't know what case, please help.
  Kind regards.

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It could be useful!

• my friend downloaded and installed the sp1 for vista, but since then, he gets a (error797) error message when it tries to connect to the internet, are there patches for this?, thanks

  It uses a dongle mobile broadband with 3 for the internet, it is telling him that there is no network available, have tried to delete the connection and reinstalling the software, with no results, control of Device Manager, I noticed there is a yellow triangle against the network adapter?, opened the properties for him and he said he did not work properly because the drivers were not installed, but when I tried to search for them in windows coudnt find?, any help appreciated, thanks.

  Hi thanks for the info, but he wasn't after all, network card when sp1 was installed, it has changed or blocked software for the mobile b/band, for someone who has the same problem, here is what you need to do.

  1, got to control panel,

  2, select programs and features.

  3, uninstall ALL! entries to do with the mobile b/band, even the software for the dongle itself,

  4, restart pc or laptop, plug in dongle and reinstall the software as if it were the first installation.

  This information came from an agent of technical support 3 and worked a treat, no problems,

  This procedure should work for all providers of mobile b/band

  hope this helps :))

• Error D 803 0010, trying to connect to the internet to authenticate the Live service

  Original title: Family Safety - 803D 0010

  I have searched for help and see a number of other people have had a problem similar but not sure that there is still an answer that works.

  I'm on a PC running Windows7 and I install critical Windows and Family Safety.

  It works very well but has stopped working.

  The error I get is 803D 0010 and family security load, but the program seems unable to connect to the Live service and authenticate.

  The specific message, it's that it cannot access the Internet.  I'm not sure this is the case and maybe a false error message.

  I am skillfully to access internet from the browser successfully and connect on the family safety website.

  The problem is that the application of family safety appears unable to do.

  Any help?

  Andy

  Hi Andy,.

  Thanks for posting on Microsoft Communities.

  The proxy for the network service settings may not be set correctly or may become obsolete. With some settings wrong together, you may still be able to connect to your Windows Live using Windows Live Messenger account and your browser, but when you try to connect to Windows Live family safety, you receive this error message.

  I suggest you follow the advice given by Rajesh Govind said on February 6, 2014 in the following link and check out:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/family-safety-will-not-connect/a2c7111e-5ff8-4E3D-891b-0d260fa148db

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Please an update on the status of the issue to help you further.

• DeskJet 2542. Help, please! How can I connect to the ipad

  I just bought the deskjet printer 2542 for my son as I said it would work with his iPad. I don't have a computer/laptop and the software is not compatible to download on the iPad. How to connect the printer to the connector wireless without it? Still, can it be done? Really hard!

  Hello Ro1312,

  Welcome to the Forums of HP Support!

  You are able to connect the Deskjet 2540 to the network with only an iPad, I'll link the steps below.

  Re: Hp 2542<>

  Let me know if it helps.

• We have two profiles on our DELL. A profile is now show this message - "the proxy server refuses connections" - when trying to connect to the internet.

  A user can connect internet - no problem, but other user gets - 'the Proxy Server is refusing connections. Emails are good all around. Have checked the settings, but can find no solution.

  Network proxy

  Type of topic: preferences< enter > in the address bar.

  Select Advanced > network.
  Search for configure how Firefox connects and then press the settings button.
  Check the settings.

• How to remove the file 'ArcadeWeb' from my computer? It tries to connect to the internet whenever I connect.

  When I tried to remove this file from my computer, I get an "access denied" message, make sure that the disk is not full or write protected and the file is not currently in use.  Also, I tried the shift + del combination and that has not worked as well.

  Hello

  ·          What version of the operating system is installed on the computer?

  To uninstall Arcade Web, follow the steps from the following link:

  http://www.arcadeweb.com/deactivate.php

• Error - Local only by trying to connect to the Internet

  Original title: Local only solution!

  Ive had this problem of 'local only' with vista for months and evryone think they know how to fix it. Ive tried everything and finally found the fix perament! IM, buying a mac. Microsoft even has not addressed this and as far as I know laugh on this subject. IM starting to think that the Charter and microsoft have an agreement, while their routers will work correctly. I'm done!

  I found the only problem "Local". I have a Belkin router. Enter the network and sharing Center. And then click State view. Go to the wireless properties, and then click Security. If it says personal wpa_2, change it to wpa personal. Then, you will need to enter your password. That seems to have fixed for me

• I get an error code 80070005 when all users outside of the administrator are trying to connect to the Internet.

  On a recently purchased HP laptop, access to internet and "computer" are blocked and trigger an error 80070005 Windows for all users other than the administrator. Is there a solution?

  Original title: error 80070005 blocking internet connection (and more) for all users other than the administrator.

  Hi tired of flamel,

   

  Thank you for keeping us posted.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.