help please: gradient to follow the "tourbillon" shape and then fades out transparent
Hello
I was wondering if someone could help me on the best way to go on what I want to achieve...
Above is my form that I created (it's a whirl to go over the text of a logo) I'd like the gradient following the whirlwind autour, rather than being at an angle fixed it is currently now. I am trying to create a light moving effect really type with CMYK... I would like each edge at the end of the LHS color then the center piece to fade to transparency (or vice versa - not yet decided) so the end looks something similar to below.
Any help would be greatly appreciated - I'm relatively new to illustrator and only really know the basics basic principles which seemed to have gotten my by far but would like to learn and learn more...
Thank you very much
T
You work with nets of gradient. Insert a few lines of networking using the NET tool, then select each point with the direct Selection tool and give it a color and opacity...
Mylenium
Tags: Illustrator
Similar Questions
-
Is it possible to get a word tend to fade and then fade out and then replace it with another word that fades in and then and so on without a person having to scroll to the bottom of the page. I searched for widgets, but I have not found one that does this impeccable for a subtitle.
You will need to do something like it in a program like Edge animate.
-
Help please gradient police Question
Help please gradient police Question
I'm using CS4 on a PC.
I degraded a whole word, ranging from light to dark.
I can take a letter, change curve and get the effect I want.
I want the whole word to have the effect described in the letter 'A' as shown in the example of wod together.
If I do a whole word I do each letter individually, and it does not give me the effect of the whole word that I am trying to achieve.
Thanks in advance for any help
rollsnut,
You can:
(1) a class and keep it in Live Type (no need to create outlines);
(2) in the appearance palette/Panel dialog box, select Add new fill;
(3) apply the gradient from the bottom of the box to tools (which will give you the same gradient as in A) and change it if you wish.
-
Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK
Have you tried to reboot your router, correct your location settings, you use audit stage 2.
-
I'm having a LOT of trouble to update photoshop elements 14! Help, please. I entered the serial number, but do not click NEXT!
You can use the appropriate link below for your installation files
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.5 | 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Help please - component video using the same clip several times
Hi people,
I have a 9 minute video I want to cut into pieces and make a 3 min video. I searched the help system and Forum, but found nothing - very probably (not being is not a native speaker) looking for the wrong keywords.
How can I add the same clip several times to a movie? If that has been resolved, I could do the rest with setting- and outpoints and would.
Thank you in advance.
Christoph
You can place the clip on the timeline and use the Split Clip (small scissors under the monitor icon) to split your clip. Place the cursor where you want to trim your clip, and then click the icon of the scissors. Move the cursor to the next position, and then click the icon of the scissors again. Then press DELETE on your keyboard and that article will be deleted and the gap will be closed. If you wish, you can take small sections, you created and drag them around to change their positions.
Once you have edited your clip, you can export the section 3 minutes as a DV - AVI to use repeatedly in your video. All you need to do to export is file > export > Movie. If you have several clips on your timeline you must place the work area bar (WAB), the gray bar above the timeline, on the section that you want to export. Then in the window export movie go into settings and for the beach, select work area bar.
You can then reimport the 3 minute clip in your project and use it as many times as you want.
-
I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.
Check this box:
-
Please tell US if there is a way I can recover a file that was accidentally deleted from the Recycle Bin. and then "emptied" from the bin.
If it was very recent, this tool would have a good shot at it. -
This program always worked a lot, and for no apparent reason, I have this problem. I really need to access these files. Appreciate your help.
You can access the files through the Explorer, double click on a data file, it should open the appropriate program.
You have the cd of works to repair?
Or in programs & features, locate the works & select, and then change > repair
-
I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...
Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].
-
When I try to use the updated creative cloud up the file runs and then informs me that "Please connect to the internet, and then try again." But I'm obviously connected.
Hi Colin,
Please try to reinstall the creative cloud after disabling antivirus and firewall.
Reference: error download or update Adobe Creative Cloud applications
Concerning
Megha Rawat
-
Hello
Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.
Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).
I did a few Google and found that we need to add something in the Essbase.cfg file as below.
Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).
Possible problems
Analytical services cannot lock enough blocks to perform the calculation.
Possible solutions
Increase the number of blocks of analytical Services can allocate to a calculation:
- Set the maximum number of blocks of analytical Services can allocate at least 500.
- If you are not a
$ARBORPATH/bin/essbase.cfg
on the file server computer, create one using a text editor. - In the
essbase.cfg
folder on the server computer, set CALCLOCKBLOCKHIGH to 500. - Stopping and restarting Analysis server.
- If you are not a
- Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
- Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
In fact in our queue (essbase.cfg) Config Server we have given below added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my question is if edit us the file Essbase.cfg and add the above settings restart services will work? and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.
Kind regards
Naveen
Yes it must *.
Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.
- Set the maximum number of blocks of analytical Services can allocate at least 500.
-
I got an error message saying "windows cannot find ' ms-windows-store: purging caches, make sure that you have typed the name correctly and then try again. I have no idea what it means. Help, please.
Reach
CTRL XBring up the Windows powershell admin
Type the following text
PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\WinStore\AppxManifest.xmlReturn to the windows store and it should re - work!
Congratulations to Luis Cantero of this post http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/just-updated-to-windows-81-and-the-windows-store/c4cf204d-bd99-426c-b800-9c9125ae739c?page=2
Enjoy
Yahya Al - Din
-
Original title: MVSCP100.dll
When I click on the program 101xD and then click counterstrike 1.6. There is error http://fotohost.lv/images/ltd84bn8ww18z68yy1oi.png.
And because he 101xD not injected in cs 1.6. Why? How can I solve this problem?
PS 101xD is a cheat for counterstrike 1.6.Hi Ivars,
Thanks for posting your question in the Microsoft Community.
Looks like Counter Strike 1.6 is not compatible with the Windows 8 operating system from the link:
1 have you ever done any recent hardware or exchange of software on your computer before the show?
2. When was the last time, it was working fine?
I suggest you to uninstall the game and install it in Windows 7 compatibility mode by following the steps:
Step 1:
Follow these steps to uninstall the game.
a. press on keys Windows + X to your keyboard, then select Control Panel.
b. Select uninstall a program
c. Select Counter-strike 1.6 in the list and choose Uninstall.
Step 2:
Follow the steps to install in compatibility mode:
a. setting up the game file right click and select Properties and then tap or click on the compatibility tab.
b. check the box run this program in compatibility mode .
c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
For reference:
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
If the problem persists, then I suggest you to post the same question in the Forums of community counter-strike for the link:
http://steamcommunity.com/app/10/discussions/0/
For more information:
Contact Steam support:
https://support.steampowered.com/
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
Since the installation of Firefox 8, when I type anything in the address bar and then press "enter" or click on the arrow for "go to the address in the address bar", nothing happens! Similarly if a place is indicated by the location bar AutoComplete feature. I hit "enter" or click the "go to" and nothing happens. " Keyboard shortcuts to "complete the .com, .net, etc. addresses" doesn't work or the other. The address bar has worked well for entering web addresses before Firefox 8. Help, please.
Try Firefox SafeMode to see how it works there.
A way of solving problems, which disables most of the modules.
(If you use it, switch to the default theme).- You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
Do not choose anything at the moment, just use 'continue in safe mode.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesWhen find you what is causing that, please let us know. It might help others who have this problem.
Maybe you are looking for
-
How can I add a second email to my current account to thunderbird?
I use Thunderbird for my main e-mail address for years, but now I want to add my secondary account. How do I do that?
-
I have a HP Slimline computer. My distorted soundis. Looks like a 33 record rounds being played on 45 rpm (ie: the Chipmunks). Someone help me! Thank you!
-
Satellite P100 - 400 PSPA6A: How can I control the fan speed manually
Good evening I would like to know how can I manually control the speed of the fan?I ask this question because my laptop rarely use the fan at a higher speed. Today, I listened to more than the normal fan, I have check the temperatures and the CPU was
-
When I try to run SFC/scannow, it will start and then gives me a message that it cannot run this program... I use build 10041' and nothing has changed since I installed it... I was wondering if this is a common problem or what? Any help is appreci
-
compartilhamento of cf.
NAO impressora installed im not windows 7 pro - com windows xp pro ???? An impressora ja esta shared not windows 7, very I can not IM com o microcomputador than tem o windows xp pro wont...