Help please with a video!
Hello! I'm doing a video for a school project and in this video, I want to show that the bag is floating / move by itself (like a robot) so how can do this? or how can I crop me the video and just show that there is no one really holding the bag?
To remove a person keeps a bag suddenly for the bag looks like it is floating you need two shots that are identical. Put the camera on a tripod and shoot a 'clean' plate that doesn't have your person or bag on board. Now pull the main action with the person and bag in the shot. Then overlay you plans in After Effects. The clean plate goes on the background layer and the main action happens on the top. Then use rotoscoping to create an animation around the bag and mask only shows bag. Because you have a locked device and a clean plate this mask must be accurate around the hand holding the bag as long as you keep the person on the side of the bag. If the person holds the bag so that their body is behind the bag at any time in the shot then it is even more difficult to hide. If it was me I get a stick, tie a black wire to the handle that was strong enough to hold the bag, then tie the string in the bag. Would make the roto even easier.
If you want to throw a hand held or moving the camera, then you should do everything you can to make sure that the shots are as similar as possible and you need to learn about the follow-up, stabilizing (not stabilize Warp) and the effect of time-remapping to get the shots line up and schedule.
It's really basic things. To learn the necessary techniques of type "rotoscoping" or "masking: in the search field in the upper right corner of the AE and read." The search help field is the most useful for new users of AE part and only 2% about to enjoy.
Tags: After Effects
Similar Questions
-
Please help me with the video card and power supply issues!
Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost
Oh and in case you want some specs on my system here are a few
Windows Vista Home premium service pack1
HP Pavilion a6620f
Processor: pentium dual core cpu e5200 @ 2.50 GHZ
memory: 4.00 GB
system type: 64-bit operating system
Version of DirectX 10
graphics card: intel GMA 3100 Total memory 256 MBMessage edited by chefinomaha on 06/03/2009 16:38Hi chefinomaha,
Sorry to hear about your frustration. Here's some good news.
I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.
The important thing is to get the right kind of diet that fits your connectors.
Here is a document with step-by-step instructions and video for adding a video card.
Here is a document with the video to replace the power supply.
-
Help please with the addition of a Section of the video
I created a video for a school organization. Have completed a section or scene, I would like to add more scenes before this scene. I know how to add things, but I don't want to start adding videos and pictures and then my audio may not be in the same place. Is it possible to add without the pictures and audio are out of sync? Can I connect the audio to the video? Help, please. Thank you!
I guess that you do not want audio move with the clip with the fact that it is already synchronized. In this case select the video and the audio clip, right click and select "link Audio and video.
See you soon,.
--
Neale
Insanity is hereditary, get you your children
-
BSOD desktop computer:
"The problem seems to be caused by the following file: TDI." SYS PAGE_FAULT_IN_NONPAGED_AREA technical information: STOP: 0 x 00000050 0xB9F6A1D0, 0 x 00000001 0xB9c5of4A TDI 0x00000000. SYS address B9c5of4A base at B9c50000, Date Stamp 48025834 physical memory dump complete. »
What should do?
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
Please follow the instructions for posting at this link
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the contents of this folder
Please, upload to skydrive or a file sharing service and put a link to them in your next post.To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files
http://www.osronline.com/article.cfm?article=545
-
HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET
I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please
Hello
Thanks for posting your question in the Microsoft Community forum.
Refer to this article and let us know the status.
Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows
Thank you.
-
Can anyone help please with Javascript. 2 small problems.
Hello. I created a dynamic PDF form with fields. I have 2 problems that I don't know that someone can help me with. (Someone I can email this PDF on request).
PROBLEM 1. In this form, I have a table (in fact I think that it is a form of sub) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (line Clear').) A single button adds a new line. It works, but effectively, it duplicates the line (and all the fields/cells of text contained in the line) and this new line at the bottom of any existing lines. What I'm asking, is for this button (the button gets duplicated with the line) to place the new line immediately below the line where it is clicked. That is to say, imagine you open the document, complete line (at this stage it is only) and click on the button 'Add Row '. You now have 2 rows (large), while you complete the second row. Now, here's my problem, if you press the button "Add a line" on the first line, a new 3rd line is added at the bottom and not between line 1 and line 2.
Actually if you have dozens of lines filled and you need to insert a line of amendment, currently it is impossible without deleting all the lines to the point where you want to check/insert.
PROBLEM 2. In this line of alphanumeric text, the are two fields (called "Rate" and "Loading") where dollar amounts are entered. As the form is filled (lines can be generated dynamically and there fields filled out manually by the user) there may be potentially dozens of lines in a completed form and, as each line has several fields of alphanumeric text, one can imagine of forming columns once there is more than 1 line. At the end of the form, the totals are automatically calculated. I created a button to reset (clear) all amounts in these two specific areas (columns), but in all ranks. Unfortunately there is something wrong with my script syntax like this button does not. (I want this facility as the end of the form, which is a draft budget, I need to send two copies - one accountants with numbers and logistics and a second copy to another Department that I don't want to give the figures, so I need the key to clear the numbers without having to erase each cell individually).
Any help that anyone can give would be much appreciated.
Please send me an email to
[email protected] If you want I send you the file.
See you soon
Bradd
Send the form to
[email protected] and I will give it a go... include a reference back to this forum announcement.
Paul
-
Hi, I have a bunch of logos in a file and animate with Oregon, so I create a timer to show (fade in - fade) logos one by one;
I had already melted all the logos with alpha = 0; but don t an idea on how to call it inside the Oregon function. My all the logos are called logo1, logo2, logo3 etc and I try to create a variable to contain a certain number and them put the first part of the name (logo) + the variable to call the movieclip but it didn t work. Please if someone could help me with this problem.
This variable contain the 2nd part of the name
var logoContador:Number = 1;
var miTimer:Timer = new Timer (3000);
miTimer.addEventListener (TimerEvent.TIMER, goTimer);
function goTimer(TimerEvent:Event):void
{
Tweener.addTween(logo+logoContador,{alpha:1,time:1,transition:"easeInQuad",});)Tweener.addTween (logo + logoContador, {alpha: 0, time: 1, delay: 1.7, transition: "easeInQuad,"});
logoContador ++
}
miTimer.start ();I'm not familiar with the help of Tweener, but just before the last brace, you have a comma. So maybe that's your problem... you have a comma in there too or you are missing the last parameter which must follow the comma.
-
NB100 help please with fan and graphics settings
Hi, I just bought the NB100 and have a few questions, I hope someone can help me with.
The fan icon goes grey or white according to the parameters by using FN and F6, but I can't feel any difference in the air around the grid on the right. It is on when the icon shows white or gray? Does really?
My second question is about the graphics settings. The intel power option that appears when the icon in the taskbar graphivs is double clicked seems to be disabled. There are automatic brightness sliders and energy saving, but none can be selected, how is it permits?
My last question is about the games. I tried a few alumni who were not graphic intensive, Deus Ex and the sins of a solar empire, but I had problems in the text boxes that require a response, and in the case of Deus Ex, they say that the graphics drivers are not compatible. Has anyone got Ant with games? I travel a lot and thinking, I want to have one or two other than playing cards installed etc.Thanks and regards, Brian
On my machine that F6 is to mute sound, F8 is for the cooling fan. Based on this fact the fan speed change.
I can't help with the power settings, like mine all seem to work OK and I can make changes.
Have you tried changing the settings through preferences/system/Power Management? -
Help please with a printer.
I use an HP laserjet M1212nf MFP printer. I have recently upgraded to Windows 8 to 8.1. Now, the printer keeps going through a phaze "during initialization... "and will not respond. I have re-defined, transformed extinguished/turned on and I'm perplexed as to what to do next. After that he goes through a couple of cycles, it will sit in the "Ready" mode for a few minutes and then restart the "Intializing. If I'm lucky, I can get it to print only after after the second or third print command was sent.
Hi obscured.
I see by your post, after the update to Windows 8.1 the printer keeps initializing and then sometimes appear after giving the command to print a couple of times. I can help you with this problem.
I'd do a power reset to see if that will solve the problem.
When the printer is still lit, disconnect the power cable from the back of the printer.
Then, disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)
Just to rule out a hardware problem, try and print a self-test on the printer hardware to see if it is a hardware or software problem. Unplug all cables from the printer except the power cord.
Restart the printer. Printing of Pages of information. Go to the section for M1210 / M1218nfs series.
Then, you can reconnect the cables again.
I would like to know if the test of the material printed.
Since the upgrade you uninstall and reinstall the printer software?
If you do not, then I would like to see if this will solve the problem.
Uninstalling the printer software.
HP LaserJet Pro M1212nf MFP drivers.
If you're still having problems, then go through the steps described in this document.
Print jobs are stuck in the print queue.
How is the printer connected? (USB/Ethernet)
I would like to know how it goes for you!
Good day!
Thank you. -
Help please with flash CS4!
Hello, I'm at school and I have a mission to fulfil on flash, but when I try to make an object, a little boring box appears around my object instead of having nothing around him, I spend it for nothing and tried to use the selection tool, but then it didn't go all graph as it should be, and instead This box is back. Ignored, even once, I tried to use the BONE tool, but it only works on a single shape, and he's not going to others to link! This is what looks like the box on the object and it's really frustrating me. Help, please!
You have selected the tool "object drawing". In your toolbar to the bottom, there is a button that is just a circle (go over it and it will say "drawing object" (it's under your color palette paint COP and above the fill lock button.) Provide your sounds like mine! Just click on this issue and it will switch the drawing of the object on and outside. You can break apart objects that you have already established as objects by selecting the form and pressing 'cmd' + 'B' (ctrl + b on a pc)
-
Please help newbie with basic video editing question
Thanks for the research. I just bought Adobe first Elements 9 and I'm working on my first project. All of the videos that I imported for this project were shot on 8mm tape, and they all have a small band at the bottom that shows nothing but the noise or static. Other that that, they seem to be good.
Is there a way I can cut the bottom out of these YouTube videos in my production? Like the place a frame around the video that hides the bottom 1/2 inch of video or so?
Thank you!
It's the small space of the transition between the images on the tape does not correctly positioned in the vertical removal interval.
On some VCRs, there is a setting of framing, but probably not on your camera.
He normally sees not on old televisions analog because they overscan but flat sacreens now usually show the full frame.
You can hide in PE9 making the whole slightly larger photo and moving ot slightly downwards.
Click on the preview area, and you will see a white rectangle with dots in the corners.
Drag these points around and down to increase the size of the whole image and move the image down so the noise is hidden.
This will make the image a little more blurry so if you want to keep the same, you can insert a black mask or effect of crops to the place, but it will not show in your finished product. Looking for help with this.
-
Someone help please with the eyre audit report?
EtreCheck version: 2.9.10 (261)
Report generated 2016-04-08 21:36:12
Download EtreCheck from https://etrecheck.com
Time 02:45
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click [delete] to remove the adware.
Problem: Computer is too slow
MacBook Pro (13-inch, mid-2012)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 785
Graphics Intel HD 4000
Color LCD 1280 x 800
OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour
HTS547550A9E384 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 499,25 (Go 460,16 free) - 36 errors
Drive failure!
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
MATSHITADVD-R UJ - 8À8)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
~/Library/Caches/com. Apple.Safari/extensions/Omnibar.safariextension
~/Library/Caches/com. Apple.Safari/extensions/Searchme-2.safariextension
~/Library/LaunchAgents/cinema-plus-1-1.ver
~/Library/LaunchAgents/cinema-plus-1-1_enabler.plist
~/Library/LaunchAgents/cinema-plus-1-1_updater.plist
found 5 adware files. [Remove]
/ Library/Extensions
[loading] com.symantec.nfm.kext (6.4.1f36 - SDK 10.9-2016-03-30) [Support]
/ System/Library/Extensions
[loading] com.symantec.internetSecurity.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]
[loading] com.symantec.ips.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]
com.wibu.codemeter.CmUSBMassStorage [no charge] (1.0.7 - 2016-03-30) [Support]
[loaded] 5 tasks of Apple
[loading] 142 tasks Apple
[operation] 37 tasks Apple
[failure] com.wibu.CodeMeter.Server.plist (2013-11-15) [Support]
[loaded] 50 jobs Apple
[loading] 140 tasks Apple
[operation] 59 tasks Apple
[loading] com.symantec.errorreporter - periodicagent.NFM.plist (2015-09-28) [Support]
[operation] com.symantec.uiagent.application.NFM.plist (2015-09-11) [Support]
[loading] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]
[loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]
[loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]
[loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]
[loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]
[market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]
[loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]
[loading] com.adobe.fpsaud.plist (2016-03-07) [Support]
[loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-08) [Support]
[failure] com.symantec.SymLUHelper.NFM.plist (2015-09-11) [Support]
[loading] com.symantec.UninstallerToolHelper.plist (2015-04-21) [Support]
[operation] com.symantec.deepsight - extractor.NFM.plist (2014-09-10) [Support]
[loading] com.symantec.errorreporter - periodic.NFM.plist (2015-09-28) [Support]
[failure] com.symantec.liveupdate.daemon.NFM.plist (2015-09-11) [Support]
[operation] com.symantec.sharedsettings.NFM.plist (2015-09-11) [Support]
[operation] com.symantec.symdaemon.NFM.plist (2015-09-11) [Support]
org.eyebeam.SelfControl.plist [no charge] (2014-12-26) [Support]
[loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]
[no charge] cinema-more-1 - 1.ver (2014-10-28) Adware! [Remove]
[failure] cinema-more-1 - 1_enabler.plist (2014-11-06) Adware! [Remove]
[loading] cinema-more-1 - 1_updater.plist (2014-11-06) Adware! [Remove]
[loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2014-10-17) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
iTunesHelper UNKNOWN (missing value)
uTorrent UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
TuneupMyMac UNKNOWN (missing value)
[ongoing] com.etresoft.EtreCheck.70432
[loading] 442 tasks Apple
[operation] 284 tasks Apple
FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]
QuickTime Plugin: 7.7.3 (2015-01-30)
Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-10) obsolete! Update
Default browser: 537 - SDK 10.9 (2015-01-30)
Silverlight: 5.1.40728.0 - SDK 10.6 (2015-08-24), [Support]
NortonInternetSecurityBF: 6.4 - SDK 10.9 (2015-09-28) [Support]
JavaAppletPlugin: 14.9.0 - 10.7 (2014-09-07) check the version of the SDK
CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]
Norton Security (2016-02-11)
Searchme (cache only) (2015-11-08) Adware! [Remove]
Omnibar (cache only) (2015-02-23) Adware! [Remove]
AdBlock (2016-03-18)
CodeMeter (2013-11-15) [Support]
Flash Player (2016-03-07) [Support]
GPGPreferences (2016-01-04) [Support]
Time Machine not configured!
5% fontd
3% kernel_task
3% WindowServer
0% com.apple.WebKit.WebContent
0% aosnotifyd
Top of page process of memory: ⓘ
Kernel_task 483 MB
315 MB SymDaemon
PluginProcess 217 MB
180 MB Safari
Mds_stores 94 MB
1.04 Go free RAM
2.96 used GB RAM (1.34 GB being cached)
Used Swap 0 B
April 8, 2016, Self test - 21:17:24
Hello Chocbar648,
Your hard drive may be faulty.
You do not have a backup.
You have adware.
You must:
(1) buy an external hard drive and make a Time Machine backup
(2) use EtreCheck to remove your adware and perform another backup.
(3) get rid of the antivirus software which obviously does you no good.
(4) operate your machine for a week or two. Then run another EtreCheck. If you have disk errors, then you should get your hard drive replaced. It is possible that your antivirus is causing these errors.
(5) If you continue to encounter disk errors, download your hard drive replaced in an Apple Store or Service Center authorized Apple. I suggest a Service authorised Apple Centre and see if they update your RAM and give you an SSD too. You don't need really to do with the Mavericks, but if you want to go to Yosemite or El Capitan, you'll thank me. Given that you need to open the machine
-
I have a Windows Vista laptop with many pictures. I can not open the photos on my Windows Live Photo gallery and have received
Error code: 0x8007007e.
How this can be solved?
Thank you. Carole
This forum is for Microsoft Security Essentials.
Please go to the Windows Live forum to get help.
-
help please with driver prodikeys
Hello, I'm writing because I really need help and there is nobody that will really help all I spoke with creative prodikeys no longer exist, so microsoft is the only chance we got to solve this problem... WE REALLY NEED A DRIVER for PRODIKEYS for WINDOW 7 64 BIT please, no one can help us I don't know how to make a driver and windows 7 is Microsoft me and many many people like me paid a lot of money to continue using microsoft and not mac or linux... Why can't microsoft supported a simple driver for keyboard prodikeys I can't afford another keyboard and I don't got no space in my room for another midi keyboard a keyboard to type so microsoft is the last chance we got it PLEASE HELP MAKE us A DRIVER for PRODIKEYS I hope UNDERSTAND YOU U.S. THANKS
On Saturday, February 11, 2012 22:06:57 + 0000, Jonatan OliverViera Gamaza wrote:
Hello, I'm writing because I really need help and there is nobody that will really help all I spoke with creative prodikeys no longer exist, so microsoft is the only chance we got to solve this problem... WE REALLY NEED A DRIVER for PRODIKEYS for WINDOW 7 64 BIT please, no one can help us I don't know how to make a driver and windows 7 is Microsoft me and many many people like me paid a lot of money to continue using microsoft and not mac or linux... Why can't microsoft supported a simple driver for keyboard prodikeys I can't afford another keyboard and I don't got no space in my room for another midi keyboard a keyboard to type so microsoft is the last chance we got it PLEASE HELP MAKE us A DRIVER for PRODIKEYS I hope UNDERSTAND YOU U.S. THANKS
Microsoft doesn't have drivers for non-Microsoft hardware. You need
to obtain a driver from the hardware manufacturer. When a driver for it
Windows 7 does not exist, sorry to tell you that you are on
chance.
Ken Blake, Microsoft MVP -
Help please with creative cloud
I buy the creative cloud two days a go
but the problem is, to my first perfect computer installed with updates (photoshop and Lightroom) etc,
but in windows, my second computer, show how to buy now, why?
I am enter whit my Adobe ID
Hello
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
Maybe you are looking for
-
What is a starry e-mail?
I can't get a question very simple answer - hell is the 'star' in the e-mail program Thunderbird?
-
StorCenter px6 - 300 d SNMP SNMP problem after FW update to 4.0.2.9960
Hello We have a problem in PX6 - 300 d, after the upgrade from version 3.2.3.15290 to 4.0.2.9960, FW SNMP configuration. Ishmael of application allows us to manage matrices. After updating the FW one of storage, the application can no longer collect
-
Problem in reading the PWM signals in myRIO 1900
Hi guys,. I work with myRIO to generate PWM pulses. Here is the block diagram of my circuit. I connected external to the analog input pin PWM pin. So I can watch the PWM pulse in the waveform table. But the waveform is not clear. This is as shown in
-
Currently unable to resolve «Change not allowed to Windows...» "Message.
We need help please. We have been plagued by the following message will appear: "an unauthorized change was made to windows. Windows found a change which will result in limited Windows functionality... ' Recently, I reformatted Dell computer laptop
-
If I don't like windows 10 can I switch back?
If I don't like windows 10 can I switch back?