Help recovery with HP Envy 14 beats edition

Similar Questions

• blue screen on envy 14 beats edition after restoring to factory settings

  Hello

  My HP Envy beats edition is 2 years old and recently had a problem starting and we have restored to factory settings since it was the only option they don't have no recovery points on the system.  It freezes for a split second, and then a blue screen at random intervals. When this happens, he mentions something about a process of dumping of physical memory, and then restart windows.

  I am able to go into windows and use normal programs, but suddenly the blue screen appears and it stops again. Especially when I use the mouse.  I don't know what the problem is. Help, please.

  Thanks for the reply! Now that I have this information, I would like you to try the procedure described in this document to Microsoft for the resolution in Windows 7 stop errors (blue screen)

  Please try all the steps, including the reinstallation of the operating system if you unable to solve the problem. If nothing works, the computer must be repaired since there is most likely a hardware problem. You can call the HP support to get it addressed.

  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thanks again and have a great day!

  Mario

• HP envy 15 "beat edition: hp envy 15" question about hardware

  Hi, I just opened my laptop Hp Envy Beat edition 15 "to replace the 8 GB of ram, and I noticed that there is an empty slot near the hard drive (see image, right on the left). the code is CS1950. Can you tell what is supposed to be for?

  This is a location for an mSATA SSD. Check out the video below.

• 1155 Envy 14 beats edition ca: battery

  Hello! I am looking to buy a new battery for my laptop, where can I buy it?
  14.8V 4000mAh/59wh real computer laptop battery for HP Envy 14-1155 ca Beats Edition
  Chemistry: Li-Polymer
  Voltage: 14.8V
  Capacity: 4000mAh/59wh
  Number of cells: 8 cells
  Thank you!

  Hello

  Please use part # from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XL838UA

  You can buy the above store or use part # (593548-001) to shop somewhere else such as:

  http://www.Amazon.com/HP-593548-001-battery-58Wh-4000mAh/DP/B007L4MB8M

  Kind regards.

• HP ENVY 14-2050se Beats Edition Notebook PC

  Currently, I have acquired the laptop next used:

  HP ENVY 14-2050se Beats Edition Notebook PC
  Serial number: {information}
  Product number: LW398UA

  Someone deleted the recovery files and I need to find a set of recovery disc for this. Y at - it somewhere I can order or download the disks?

  Every other time I boot the system it blue screens, but everything checks very well and he's generally well after the restart of the second time.

  Hello

  You can order a replacement set of recovery discs from the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP envy beats edition 23

  I have a hp envy beats edition 23. I bought it about 2 months ago. At home and it works, it has been already updated to windows 8.1 and it is 64-bit. My question is that when I got to the settings in the charming bar, my selection of screen is dimmed and says unavailable. Why can't I change the brightness?

  For this particular system, use HP My Display to change the brightness settings.

• I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  Refer

  Using creative cloud | Install, update, or uninstall applications

  If previously produced was not uninstalled properly then you can required to run CC cleaner once the tool and remove them

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• HP HP Pavilion dm4-3002ea Beats edition, the strange fan noise

  Hey guys first post so sorry if this isn't the correct procedure to indicate the problem or the right section!
  I have a HP Pavilion dm4-3002ea beats edition laptop, bought about a year and a half (so out of warranty).

  Now, the problem of the half that I have is a terribly strange fan noise coming from the laptop ONLY when it was hibernation, it is Purring away while I'm typing on it now, fan works fine, no overheating or issues like that, I can game, leave it on for hours etc its perfectly fine. The only problem is in hibernation it! I always put in hibernation in order to keep all my work of University ready to leave when I'm back on it, with all my tabs and such always opens on the sections, I need. It is very good that he hibernates without problem. Its when I go and turn it back on, it makes a vibration noise which I assume is the fan for about 15-20 seconds (?) as his recovery after hibernation and then is perfectly fine once more. He never did this noise after the sequence of the hibernation, or when I restart it. It's awfully strange and something I want to just make sure is not a real problem that I need this laptop for my university work. I can only assume, is the fan that makes noise, but it could be the HARD drive maybe? Not too sure on this one. He never blue screens etc, the HDD works fine so I'm really at a loss here! Any advice would be appreciated.
  Also I tried to clean the air fan, but I did not dare in disassemble correctly yet because it looks pretty complex of youtube, resembles access sick fan have to jump off the keyboard and the back which is a lot of effort. But if it goes bad opens and take a peek! I would like to know what it is, but I don't want to tinker with the bowels, as I used to do with my old laptop so its something stupid that is easily fixed! Also I always Hibernate it instead of closing it down, but being quite computer should not do lasting damage, I'm good? I mean he puts just the data disk HARD ready to be accessed the next time I turn it on? But hurt close more if this will help!
  Another quick problem which is pretty stupid because it is a HP Beats edition... half the speakers do not work on the right side of the laptop! Ironically, good! I'm not too fussed as its plugged in speakers on my desk, most of the time, but still it's pretty boring, as well. It creaked and went off one day and then he jumped several times on but now seemed to give up! The other side works well, reinstall all drivers etc to make sure that it isn't is not material, so I guess a loose cable? Pretty stupid, really, but still I guess another reason for me to break open and get to the bottom of this! As laptops out of warranty and I don't really want to take to a store of the laptop, in the hope of an old House of the noise of the fan if possible challenge! Speakers aren't that big a deal as always half works very well.

  If necessary, these specifications:

  HP Pavilion dm4-3002ea
  Windows 7 64 bit
  Intel i5 2450M 2.50 Ghz processor

  12 GB of Ram (I have added 8 gb on ago about 6 months so the amount)

  750 GB HARD drive.

  Congratulations to all!

  Hi Jack_DM4

  If I understand correctly you are updated, but we have still the sound issue only with the laptop not on devices so it looks like that the speakers on the right side of your laptop may be missing and vibration is still ongoing with the fan, but only when it starts first to the top that looks like a balancing problem.

  These two problems are hardware related but will not cause any damage to your computer. The speakers can be replaced if you choose by contacting HP here parts store and you place your order of new speakers and their replacement. If you are under warranty I would get fixed under warranty.

  The problem of vibration is just the fan rebalance itself when it starts first to the top once it gets to the speed of the passing air forces hovering in the centre of balance so he and when he settles down if imbalance. If you can deal with noise very well, otherwise you can order a new one from the link above HP parts store.

  If you are still under warranty I would strongly suggest that you get the notebook repaired under warranty as you may void the warranty if you open the notebook. If this is the case

  I think it would be best if you contacted technical support HP for repair options.

  Link US support for contact options for portable computers purchased in the United States.

  Link to American support outside of the contact options for laptops purchased outside the United States.

  Thanks for posting on the HP Forums and please feel free to re-post if you have any questions or concerns. Have a great day!

• The option for the DM4 beats edition HARD drive

  I dm4 beats with i7, 8 GB ram, 1 TB 5400 RPM hard drive. The laptop is very slow during operations and only works very well with fresh install a few days. As I am a heavy user and have a lot of cloud storage apps and use of heavy applications. I think that maybe the HDD at 5400 RPM is the neck of the bottle. So here's my questions-

  1 allow moving to SDS significantly faster normal operations?

  2. can I install a msata without removing the hard drive 1 TB - in combination.

  3. What is the difference between msata and sata II, sata III for my thing. CTO3000 model beats editions.

  4. What are the things to be searched with your options suggested by the top. like several card ssd IOPS / s read/write power consumption. keeping in mind tht my requirement is performance and not consumption.  What type of SSD you would suggest. I just want to get a 256 GB cheap entry level ssd. Review crucial, PNY, power of silicon with sub 100 USD range.

  Many forums are talking about optimization after installed SSD. So should I worry about something other than the starage facility.

  It's a sweet price on this drive PNY 480. I really don't think you can go wrong with it.

  I would stay away from the hybrid of 2 black. The comments are not good. You need to load a driver to see the two partitions and performance is not really at the height on the side of the SSD.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Tecra 9000 - error message with Windows XP SP3 home edition

  Hello

  I have a Tecra 9000 in very good condition, until yesterday, I have no problem!
  After updating my Windows XP service pack 2 on the "service pack 3", everything works fine but when I press the button 'TOSHIBA controls' and 'mouse' for setting, Windows error message occure: "run a dll as an app"!

  Even if I go to "Start" and "Control Panel" and press the mouse, after setting close icon, or just simply do nothing (cancel), the same message! I did not notice any other problem with the TOSHIBA utility!
  My driver for mouse is "Logitech mouse ware, 9.40! Can you help me?

  This oldie works well with Windows XP SP2 home edition and in my opinion you should use without SP3. Try to remove the SP3, and I hope that everything will work properly again. Problem is that the old tools and utilities designed for Toshiba probably aren't tested and updated to SP3.

  I have more Satellite M70 and use sill with SP3. I don't want to risk anything and have problems.

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• HP DM4: My HP DM4 Beats Edition right hinge was stuck.

  Help, please!

  My HP DM4 Beats Edition right hinge was stucked and caused the screen (where the hinge is attached) to the slot. Now my screen is completely down. I want to know if I can still get this repaired. This notebook is so expensive and yet I've had only 1 year and 6 months now.

  @Rudeskagirl27 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message after the weekend to contact HP identified. Also, keep in mind is not to publicly display (serial numbers and information)
  
  See you soon,.

  KarolB

• Pavilion DM4 - 3090 Beats Edition - could not retrieve the BIOS update failed

  Hello everyone.

  I was trhe proud owner of a HP Pavilion dm4-3090 Beats Edition until two days ago, when I updated my BIOS, but I was unable to power on the laptop again. The system simply feeds the button WE and the Wifi (F12), HARD drive turns a bit, DVD player makes a noise and powers of fan on any USB flash drive connected to power system; but only for a period of 1-3 seconds.

   

  
  This process is repeated every 2 to 3 seconds.

  I have vain tried to restore the BIOS from the HARD drive (the HARD drive has not changed, I have still the partition HP_TOOLS in), with key combinations: Windows + B, Windows + P, Windows + Esc, Esc + Fn, Fn + B, Fn + P, four arrows. I also tried to do this via USB flash drive (with UEFI tool provided by HP), put some BIOS downloaded HP in the root and the current, New records and previous USB drive, once again, in vain. The laptop seems forever trying to read the USB key, just it under tension and that's all.

  So my question is if you please tell me what I do wrong and also, is there is another way to try to get it back.

  Thank you very much in advance.

  Resolved to send to a third party service for a reflash BIOS.

• Windows 7 64-bit with Star Trek Armada 2 edition compatibility issues

  I have a HP DV6-1355dx and I have had issues running programs on Windows 7 64-bit edition and don't like it. First of all, I have a games for Windows 95, 98, XP, Vista called 'Armada of Star Trek,"'Star Trek Armada II Demo', 'Star Wars Galactic Battle grounds - Saga Edition', and I also have a programe of game production animal called"Game Maker 7. With the games in Star Trek, they install OK but when I try to play them they say I don't have enough virtual memory, they all have two needs a minimum of 256 MB and a recommended amount of 1 GB, and according to my computer, I have 8 GB of virtual memory. With the Star Wars game graphics are stripped but the graphics card of computers more is sufficient to support because my computer call supports the 1080 p 3d graphics and the game is not HD or 3D. The programe "Game Maker 7" guard back to the version lite free of the paid Pro version, but it doesn't on my HTPC Windows 7 family 32-Bit, I also on, and it does not show some programs tap tiles, but they appear on the HTPC, so do you know what could be the problem, I know it something to do with the 64-bit operating system part , but I don't know if it's just that or not. I have also contacted HP and YoYo Games (Game Maker 7) and expect them here. I would appreciate it if you could help me at least pushes the problem wrong.

  Hi Sharp955,
   
  Yes, the game Star Trek is not compatible with Windows 7 64 - bit edition. However, it is compatible with the 32-bit Windows 7.
  For more information, see Compatibility of Star Trek
  For further assistance, please contact the game manufacturer support team:http://support.bethsoft.com/
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help please with BSOD

  BSOD desktop computer:

  "The problem seems to be caused by the following file: TDI." SYS PAGE_FAULT_IN_NONPAGED_AREA technical information: STOP: 0 x 00000050 0xB9F6A1D0, 0 x 00000001 0xB9c5of4A TDI 0x00000000. SYS address B9c5of4A base at B9c50000, Date Stamp 48025834 physical memory dump complete. »

  What should do?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow the instructions for posting at this link

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545