HP ENVY 14-2050se Beats Edition Notebook PC

Similar Questions

• HP ENVY 17-2100 3D Edition Notebook PC motherboard

  Hello

  Has anyone idea how the price of the HP ENVY 17-2100 3D Edition Notebook PC motherboard. I intend to change my motherboard because of the problem here. http://h30434.www3.HP.com/T5/notebook-recovery/black-screen-no-BIOS/TD-p/3288555

  Hello astovlBMB,

  I'm sorry to hear that you have problems with the motherboard on your HP Envy 17-2100 3D. According to the Manual on page 20:

  Map of the system (including the 1 GB graphics discrete memory and hardware replacement thermal subsystem):
  Only for models computers equipped with a block to display 3D Part # 630793-001
  For use only with models of computer with a 2D display Assembly part # 630792-00

  Please check HP parts Surfer: http://partsurfer.hp.com/search.aspx for prices and any replaceable components options.

  I hope that was helpful.

  Thank you

• How do I change or update the graphics card on a HP ENVY 17 - j020us Quad Edition Notebook PC

  I want to know if I can add another video card or if I can swap the video card to intel-4400 HP provided with this computer. I tried to look on the sites of HP and may not know if the graphics card is integrated or if she is separated.

  Hello

  The 'Intel HD graphics 4400' is soldered to the motherboard (or integrated) and you can not change or Exchange. You have to live with it and save the money to buy another machine.

  Kind regards.

• HP ENVY 17-j020us Quad Edition Notebook PC RAM and SSD update

  Hello I was wondering if it was possible to update the card I have now

  Currently it has 8 GB of DDR3 memory, 1024 GB 5400 RPM hard drive. I also wanted to know if I could downgrade to 8.1 for windows windows 7

  Thanking you in advance

  Hello

  Manual: http://h10032.www1.hp.com/ctg/Manual/c03922401.pdf

  Data sheet: http://support.hp.com/us-en/document/c03754267

  Driver download page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5408157

  RAM: You can spend in total 16 GB MAX, put two 8 GB DDR3L PC3L-12800 1600 MHz SO-DIMM SDRAM into the two slots. I wouldn't do this if I'm going to upgrade SSD and it's more than enough unless you're going for heavy fabrics intensive programming & resource.

  SSD: Yes, you can replace SSD HARD drive in the main Bay and make the boot drive SSD SSD HARD drive cloning. If your model has two hard drive Bay, you can move the HARD disk to secondary Bay - to buy the kit of additional hard drive for this property in the Bay.

  Decommissioning: You may need to clean install Win 7 after buying the product key of Microsoft. Downgrade rights are given now for version 8.1 of Win Pro for laptop OEM. Drivers for Windows 7 are available in the download of your model site.

  Your laptop came with Windows 8,

  http://m.WikiHow.com/downgrade-Windows-8-to-Windows-7

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=fV92IN3PQMD

  Concerning

  Visruth

• HP envy 15 "beat edition: hp envy 15" question about hardware

  Hi, I just opened my laptop Hp Envy Beat edition 15 "to replace the 8 GB of ram, and I noticed that there is an empty slot near the hard drive (see image, right on the left). the code is CS1950. Can you tell what is supposed to be for?

  This is a location for an mSATA SSD. Check out the video below.

• HP ENVY CTO 7300 dv6t Quad Edition Notebook PC updated bios - win7

  Hello...

  I WANT HP dv6t-7300 CTO Quad Edition Notebook PC , it came with win 8 that I demoted for win 7, I received my drivers of HP Pavilion dv6t-7000 CTO Entertainment Notebook PC.

  I have problem of heat and I want to update Bios, the current version: Insyde F.29 03/10/2013.

  He tried to update pavilion dv6t-7000 me gives error message:

  .. . How update the bios?

  You don't Flash the BIOS unless you get the upgrade for the BIOS of the page of CTO Quad Edition Notebook PC drivers HP ENVY dv6t-7300. Since there is no upgrade BIOS listed on this page, there is no way to upgrade the BIOS. Depending on the exact systemboard and the OS that is installed on your computer, the HP part number will be something like "682174-501", which means "Windows 8 Standard / 2.0 GB of discrete video memory / 45 Watt CPU. The comparable numbers for the dv6t-7000 series is 682174-001, which means "Windows 7 / 2.0 GB of discrete video memory / CPU 45 watts.

  The MAIN of the BIOS is different version, the routine will not allow BIOS flash. IF you force it, you can make your computer does not work. DO NOT try to Flash a BIOS that does not support your computer page.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen

  Hello

  I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop.  I have some...

  Help, please!

  Hey @HPENVY15t-j000,.

  Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.

  I hope this helps.

  Thank you.

• HP envy beats edition 23

  I have a hp envy beats edition 23. I bought it about 2 months ago. At home and it works, it has been already updated to windows 8.1 and it is 64-bit. My question is that when I got to the settings in the charming bar, my selection of screen is dimmed and says unavailable. Why can't I change the brightness?

  For this particular system, use HP My Display to change the brightness settings.

• 1155 Envy 14 beats edition ca: battery

  Hello! I am looking to buy a new battery for my laptop, where can I buy it?
  14.8V 4000mAh/59wh real computer laptop battery for HP Envy 14-1155 ca Beats Edition
  Chemistry: Li-Polymer
  Voltage: 14.8V
  Capacity: 4000mAh/59wh
  Number of cells: 8 cells
  Thank you!

  Hello

  Please use part # from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XL838UA

  You can buy the above store or use part # (593548-001) to shop somewhere else such as:

  http://www.Amazon.com/HP-593548-001-battery-58Wh-4000mAh/DP/B007L4MB8M

  Kind regards.

• HP ENVY dv6t-7300 CTO Select Edition Notebook

  I have a HP ENVY dv6t-7300 CTO Select Edition Notebook PC, Ralink 802.11 b/g/n WiFi adapt when I updated to windows 8.1 the wi fi will not connect to the web, it just gives me limited connection, Microsoft said that it may not be window 8.1 compatible with anyone knows about it?

  At out the battery and put it back over the laptop and it now apears to be good.

• blue screen on envy 14 beats edition after restoring to factory settings

  Hello

  My HP Envy beats edition is 2 years old and recently had a problem starting and we have restored to factory settings since it was the only option they don't have no recovery points on the system.  It freezes for a split second, and then a blue screen at random intervals. When this happens, he mentions something about a process of dumping of physical memory, and then restart windows.

  I am able to go into windows and use normal programs, but suddenly the blue screen appears and it stops again. Especially when I use the mouse.  I don't know what the problem is. Help, please.

  Thanks for the reply! Now that I have this information, I would like you to try the procedure described in this document to Microsoft for the resolution in Windows 7 stop errors (blue screen)

  Please try all the steps, including the reinstallation of the operating system if you unable to solve the problem. If nothing works, the computer must be repaired since there is most likely a hardware problem. You can call the HP support to get it addressed.

  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thanks again and have a great day!

  Mario

• HP DM4: My HP DM4 Beats Edition right hinge was stuck.

  Help, please!

  My HP DM4 Beats Edition right hinge was stucked and caused the screen (where the hinge is attached) to the slot. Now my screen is completely down. I want to know if I can still get this repaired. This notebook is so expensive and yet I've had only 1 year and 6 months now.

  @Rudeskagirl27 ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message after the weekend to contact HP identified. Also, keep in mind is not to publicly display (serial numbers and information)
  
  See you soon,.

  KarolB

• ENVY 15-j059nr Quad Edition No.: hard drive DST short test failed

  My laptop HP ENVY 15 - j059nr Quad Edition PC notebook does not start. I ran diagnostics test quick HP UEFI using ESC + f2 to restart, the hard drive failed the short DST test with failure code 64NC9H-6TA85K-MFGJWK - ST 60, 03. What does this code mean.

  Hello

  Yes you can.

  Kind regards

  DP - K

• dv7t-7200 CTO Quad Edition Notebook PC - errors after 8.1 update update and HP

  I have a HP ENVY CTO 7200 dv7t Quad Edition Notebook PC
  Product number: B6B75AV

  Originally from Windows 8 Pro with Media Center 64-bit

  Upgrade to WIndows 8.1 via the shop
  Everything seemed OK

  HP Support Assistant eliminated 2.1.0.1002Ap4 contained in SP58398 which has updated the driver Intel Rapid Start Technology.

  (A) after the start, I now get an office messages "your system seems not to have Intel Rapid Start with technology."

  (B) if I start the Intel Control Center, I get the message "there is currently no application filed.

  (C) if I start the Intel Rapid Start Technology Manager, also get "your system seems not to have Intel Rapid Start with technology."

  (D) also, if I try to use an application to read data S.M.A.R.T, which also fails

  (E) However, I get the info of PassMark DiskInfo:
  SysInfo DLL Version: SysInfo v1.0 Build: 1041
  Export: 16:18:18 November 18, 2013

  The device information:
  Device ID: 0
  Interface: RAID
  Capacity of the apparatus: 715402 MB
  Serial number: {information}
  Model number: ST750LX003-1AC154
  Firmware revision: HPM1
  Sheet music:
  N/A

  The ATA information:

  Geometry of the disk:
  Cylinders: 0
  Tracks/cylinder: 0
  Sectors/track: 0
  Bytes/sector: 0
  Total of the sectors of the disk: 1465149168
  Logical sector size: 512
  Physical sector size: 4096
  Media rotation speed: 7200 RPM
  Buffer size: 0 KB
  The ECC size: 4 bytes

  Compliance with standards:
  ATA8-ACS taken in charge: Yes
  ATA/ATAPI-7 taken in charge: Yes
  ATA/ATAPI-6 supported: Yes
  ATA/ATAPI-5 support: Yes
  ATA/ATAPI-4 taken in charge: Yes
  Series/parallel: Serial
  SATA 3.0 Compilance: No.
  SATA 2.6 Compilance: Yes
  SATA 2.5 Compilance: Yes
  SATA II: Ext Compilance: Yes
  SATA 1. 0a Compilance: Yes
  ATA8-AST Compilance: Yes
  World wide ID: 5000C5005DF1063B

  Feature support:
  CHIP supported: Yes
  CHIP enabled: Yes
  SMART taken self-test supported: Yes
  SMART error log supported: Yes
  Taken LBA supported: Yes
  Taken IORDY supported: Yes
  CFast taken in charge: No.
  Taken DMA supported: Yes
  DMA multi-word maximum mode supported: 2
  DMA multi-word selected: None
  Ultra maximum DMA mode supported: 5
  Ultra DMA is selected: 5
  Maximum PIO mode supported: 4
  SATA compliance: Yes
  Supported NCQ priority information: No.
  Unload while NCQ commands are exceptional supported: Yes
  The event of PHY counters supported: Yes
  Application of sustained power management: No.
  Set of features taken NCQ support: Yes
  SATA Gen2 signaling speed (3.0 Gb/s) supported: Yes
  SATA Gen1 signaling speed (1.5 Gb/s) supported: Yes
  Software Settings Preservation: Supported, enabled
  Provision of data in the order: unsupported
  Initiate power management: supported, Enabled
  DMA Setup self-actuation: unsupported
  Buffer of zero offsets: unsupported
  Trusted Computing taken in charge: No.
  Host Protected Area (HPA) taken in charge: No.
  Read-ahead support: Yes
  Predictive read enabled: Yes
  Support for write cache: Yes
  Cache write-enabled: Yes
  Power management support: Yes
  Security mode supported: Yes
  Security mode is activated: no
  Device Configuration Overlay (DCO) taken in charge: Yes
  Supported 48-bit addressing: Yes
  Auto-acoustic management (AAM) supported: No.
  Start standby (THEN) supported: No.
  Advanced Power Management (APM) taken in charge: Yes
  Advanced Power Management (APM) enabled: Yes
  Current level of APM: Minimum energy without waiting
  CompactFlash Association (CFA) taken in charge: No.
  General Purpose Logging (GPL) taken in charge: Yes
  Streaming support: No.
  The media card support through: No.
  Supported power conditions extended: No.
  Scope of supported status reports: No.
  Writing-reading-check supported: No.
  Supported free-fall control: No.
  TRIM command support: No.
  SCT command transport supported: Yes
  NV Cache enabled: no
  NV Cache support power management: No.

  SMART ATTRIBUTES:
  ID Description status worst threshold value TEC gross
  ---------------------------------------------------------------------------------------------------------------------------------------------

  Any ideas what is it?

  I tried to save the patch that HP has pushed out, but I didn't, my system state would be if I did.

  Any ideas?

  Thank you!!

  xzr1tv

  Install the new BIOS F29 with

  Supports the feature of Intel iRST systems

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en&OS=4132&product=5328068&sw_lang=

  Intel Management Engine Interface driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124055-1&CC=de&DLC=de&LC=en

  Update the RST

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  Chipset

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&ProdId=816&lang=eng&OSVersion=Windows%208.1 * & DownloadType = drivers

  Check your settings in Bios of RST

• Pavilion dm4t Beats Edition: CPU temperature

  I applied thermal paste two times for my processor Intel Core i7 - 2640M CPU (Sandy Bridge 4 MB L3 Cache, TDP of 35W).  I cleaned the cooling fan and followed the instructions of cleaning and the applications of the dough.  I used the thermal paste BD hardware House.  I also use a deep Cool Multi Core X 6 Notebook Cooling Pad.

  The fan continues to run at high speed when I'm on the internet, usually when viewing videos.  Subsequently, Firefox or IE slows to a crawl and do not answer.  I think it's due to the temperature of the CPU.  Norton 360 can't find any issues and regularly optimizes the computer (Pavilion dm4t Beats Edition).  I downloaded an app to CPU temperature and saw as high as 90-95 ° C time.

  What is the good thermal paste to use?

  Don't you think that the temperature of the CPU is the casue of the internet software issue?

  Y at - it an upgrade of the internal fan of higher capacity?

  Suggestions, please.

  I cleaned the fan & events last weekend.  Everything was very clean.  I actually empty the events each week.

  I looked in the Task Manager while using Firefox & followed the CPU temp:

  Firefox was using 38% of the resources CPU & Flashplayer 10% with the CPU 44% charged and with a temperature of 90 c.

  I also orderd thermal paste another (GELID Solutions GC EXTREME).