Help required for binding Organization Admin roles of user profile in R2

Similar Questions

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• Help required for Push services! Options!

  
  

  You need to register to use the food pusher. There is an online form.

  Software point of view, you need to write an application server that runs side push of content and you need an application of hand that accepts and displays the push message. There is a push from Java SDK, you can download to help with the software component.

• help required for cisco nexus 1000v

  Hello

  I have three esxi host in my environment and I want to integrate these hosts with cisco nexus 1000v switch.

  I installed vsm on host1 and adding the remaining host via vsm Update Manager. exchanges I have already create in SMV shown in the welcome that I've added to the vsm, but the port group is not shown on the host1 esx on which I have installed vsm, should I also add the host that contains MSM in the cisco nexus switch?

  I want to say that I have installed the MEC on any army three esxi. is it good?

  Hi Mohsin,

  Where did you read that? In the past, we have added the guests, including one who executes the VSM. Usually run us both VSMs (primamry and secondary) and add anti rules affinity so that the two VSMs are on different hosts. I'm not a person CISCO, but having worked with CISCO engineers, we had no problem with what you have just mentioned. It would really be a waste of host in my opinion. I don't see why this could be a problem... As long as you have all your trade (PGs for your packages VSM etc etc) in place, you should be able to add all hosts in my experience.

  Follow me @ Cloud - Buddy.com

• Help required for a very simple HTTP connection to a remote server (not localhost)

  Hello

  FlashBuilder 4.x is very promising, but the system is very difficult to use and very simple data binding operations making becomes a daunting task. In addition, the documentation is terrible, and it seems that each example Adobe has ever published of concerns localhost and not on a remote server. What happens if we do not use localhost, Adobe?

  Please, can you show me or tell me, how to link external data - even something simple like "hello world"-in a control on the page - textarea, datagrid, etc.? I want to use the HTTP services or return some HTML/XML/JSON - or even nothing. Whenever I try to connect, I get an error saying the URL I entered contains an error and I need to check the settings etc. Here my script, which is a ColdFusion script just returns (valid) XML. I also have a crossdomain.xml in the root of the server file and the script works fine when the seizure in the browser, etc..

  Enjoyed all the examples. Really want to dumping FB4.6 in the trash at the moment, because simple things that can be coded by hand in seconds become enormous tasks in FB

  Kind regards

  Mark

  Nevermind, I finally remove FlashBuilder and installed Corona. A written my first application in an hour, FlashBuilder is a dinosaur compared to Corona. Corona which supports also a lot faster and the documentation is much better. FB is bloatware and much too bulky. If you want quick results and an API that works out of the box, I would advise you to Corona. I spent many wasted hours juggling FB and it does not only deliver.

• help required for the re-installation of windows XP

  I lost my CD to reinstall windows that came with my Dell PC, now I need to format the system, but I can't do without the CD. I tried to use another CD, but it does not take my registered code. Please suggest a solution?

  You have to take this back to the local engineer, so he can solve the problem, he created.

  If this is impossible, you can see if your hard drive has a hidden restore partition. You can check this by running the Disk Manager:

  Make a right click my computer and select manage. On the left side of the window, select disk management.

  What do you see listed?

  You have access to ANYONE Dell XP Pro reinstallation CDs? If so, that will be VERY useful! If so, because the interaction of these OEM special brand with the motherboards of Dell CD, you will not even need to enter a product key.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Run the cleanup tool to remove Ps CC 2014:http://www.adobe.com/support/contact/cscleanertool.html .

  Restart the computer and then try to reinstall Ps CC 2014.

  Kind regards

  Ashutosh

• How to get the IOM Admin roles for a user using API

  Hi all
  
  I'm trying to get the roles of administrator to a user by using the API. I'm using the code below, but it is returning null, even if the user has two Admin roles...
  
  private void getUserAdminRoles (String userID)
  {
  Ars AdminRoleService = oimClient.getService (AdminRoleService.class);
  The list < customer > a = ars.getAdminRolesForUser (userID, null);
  System.out.println ("*" + a.size ());
  }
  
  Thanks in advance

  Ars AdminRoleService = oimClient.getService (AdminRoleService.class);
  List = ars.getAdminRolesForUser (userID, null);
  System.out.println ("*" + a.size ());

  Go to take instead of the user name.

• How to map a role OIM11.1.2.2.0 to Helpdesk Admin role using IOM/OES

  Hi all

  I created a role called Admin in IOM account. This role needs to be able to change passwords for users. So, using OES apm that I've mapped the application named IOM user role change password to the Admin role account that I shot of OUD. After scoring in the IOM with a user with the role of account Admin, I am unable to change passwords for users. Is it possible to create a role in using OES/IOM has privileges in IOM?

  If you have questions or need more information please let me know.

  Thank you
  Jesse

  Yes, using the Admin role API you can assign users the role of Help Desk as soon as it is approved for custom Admin account role in IOM. If you need to place the code in the handler of role.

  So that means... once the Admin account is assigned to the user after the approval workflow, the role of the Admin Help Desk will be assigned automatically.

  Same scenario work in R2 we implemented and it works perfectly fine.

  You can ask questions if deal you with any specific problem / need for clarification.

  ~ J

• Permisions required for mounting NFS on ESXi host

  Hi team,

  In our java application uses) use API VMWARE to mount the NFS datastore on the ESXi host. But to do this, we need the ESXI root permissions. Because having credentials root door reached the safety of the system, we would like to create a user with the required permissions will be sufficient to add the mounting NFS on ESXi host.

  But do not know how to see the permissions required for the Assembly of the NFS on ESXi host. Pointers would be useful.

  Thanks in advance,

  Anjana

  Hello

  Storage permissions lies in the roles of Group of data store.

  You should have a default profile role of storage in your vCenter.

  Cheque image:

  

  Hope this helps

• What permissions are required for access to VMware Workstation?

  I need to provide access to a few virtual machines in our environment vSphere for a user through VMware Workstation 9.0.2 but questions.

  There are 3 virtual machines in a folder under models and virtual computers that this user needs access base (start, stop, console). I first tried assigning the role of user (sample) of the virtual machine to the user on the folder that contains these VMs (with spread), but trying to access one of them workstation as long as this user, I get the error was refused permission to perform this operation. I even tried to assign the role of administrator for this user on this issue and received the same error.

  Then, I assigned the user (sample) of the virtual machine and then later the role of the administrator directly to the virtual machines, but when you try to connect through my computer I get this error with or the other role (I have attached the log file, it refers):

  

  After clicking on OK, workstation breaks down, and then I get this error:

  

  The only way I could successfully get this user access is by adding the user to the local Administrators group vCenter Server, but after doing this, the user has full access to all virtual machines. I should also mention that Im able to access the virtual machine with the basic functions assigned via vSphere client to web without problem with permissions above affected as this user.

  Does anyone know what is required to provide access by workstation I'm looking for?

  Thank you!

  Figured it out!

  First, for each virtual machine that you want to grant access, to add the user/group with the assigned role, you want to give them. An additional step required for access to the workstation is, for each host you granted access to the virtual machines are on, you must also add the user/group and assign the read-only role, making sure to uncheck propagate to child objects.

  So it's similar to the thread above, but avoids having to explicitly revoke access to each another VM on the host. So now, when I log in as a user with that I was testing, I can connect to vCenter via my computer, only to see the VMs Ive applied custom roles to and, especially, can connect to them without problem!

  Also, it seems that even if work stations invite you to assign read-only permissions to the host is not actually do something.

  Thanks a bunch for all the help everyone... especially ShadyMalatawey. If I would not have seen this prompt in my computer to apply the permission he would have had much more time to understand.

• network quota for this organization vDC has been reached

  Cannot start VAPP "db-template.
  -Unable to start virtual machines in the pool of resources "(7cf9a7e5-1784-42bc-9182-9167c5be5ba3), SMX-org-vDC.
  -Impossible to deploy the "VM" network because the network for this organization vDC quota has been reached.

  I assigned a pool of 30 IP addresses while creating the external network. But, the quota reached so quickly after having allocated 2 IP addresses.

  When I check pool network he had exhausted after having allocated 2 IP.

  I'd appreciate any help.

  Whenever you create a network, whether it's a network (NAT) org or VAPP vCloud network administrator will have a network of the pool, then you must decide how many networks, you want to be able to create by org.

  Because it can become intensive admin to create numerous exchanges, you can run several layer 2 networks on a virtual LAN using vCDNI, so if you want to create many networks, this can be a better choice for you. There is a section on configuring this in the vCloud Administrator's guide. Be aware that you need to increase the MTU to 1524.

  Hope this helps Charlie

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• Where is it save to save a photo library? Requirements for the external hard drive

  Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

  It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

  By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

  But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

  Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

  If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

  To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

  I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

  Does anyone found a similar document for the Photos?

  Is it possible to store original files referenced on iCloud by car or in a box?