Help sharp off-trail filled with paint?

Similar Questions

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Object drawn with a pencil will not fill with the paint bucket tool

  I draw an object using the pencil tool in Flash CS5. Since I use several traces I connect them all by clicking on Edit, combine objects then Union combining the traits in a single object. But when I try to fill it with the color that it doesn't work. Even if I make sure there is no gap. A few small areas that are closed in the fill of the object with the color, but do not know why the rest of the object refuses to be filled with color.

  

  I fiddled around and switch between the object drawing Mode and drawing Mode, but that doesn't work anymore. Usually when I use the Brush tool I have no problem filling the object with colors. But for some reason, I can't when I use the pencil tool! Help, please!

  OK, think about it. If you select your character and in the properties to ask him to be 3000 wide, then zoom in to just behind his ears, you'll see a gap. There is another gap directly in front of the ears.

  The thing filling gaps that Chris mentioned does not immediately work, because your lines are still in odd drawing object, the union did you yet left the tiny holes. You can exit this mode by a Break Apart and select all. Areas with gaps fill again right away, but the small fill openings feature will work. The option size of gap is in the tools downwards when the paint bucket is selected.

  I'm going to insert an image, which shows the great super version, where you can see two gaps, and you can see how the right box is filled, even if there is a gap.

  

• Keyboard shortcut for fill with the color layer are opposed on my PS CS6 OSX install help?

  Hi all

  I'm kinda a noob and following a tutorial... and found something strange and I wonder if you could help me understand what is happening.

  I have Photoshop CS6 extended on a macbook pro (late 2011).

  I am running OSX v 10.7.5

  I'm the long and the instructor has added a new layer. I did it.

  He then filled the white layer which is its background color (it has foreground black, white background). I have same evidence / background colors.

  Now I thought on mac to fill with the foreground color, you hit Apple + Delete and to fill it with the background, press Option + delete

  It's the exact OPPOSITE for me. I hit Apple + DELETE (or even BACKSPACE) and filled it with my background color, which is white

  If I hit Option + DELETE (or RET.), filled it with my foreground color.

  I tried searching in the area of keyboard shortcuts change... but I do not see these settings anywhere.

  I have an external keyboard plugged into my mac. It is a 3rd party one, but seems otherwise never function normally.

  Keyboard here is: http://pckeyboard.com/page/UKBD/UB40P4A

  Any suggestions why my shortcut keyboard for a fill with the color layer could be reversed?

  Thanks in advance,

  CC

  Looks like it doesn't work as expected

  keyboard shortcuts in Photoshop to paintng:

  https://helpx.Adobe.com/Photoshop/using/default-keyboard-shortcuts.html#keys_for_painting

  

• Fill with solid color problem

  Please, please help to find out why Photoshop fills a selection of transparent color, while opacity and fill with a layer are set to 100% and blend modes is 'normal '.

  Thank you!

  Olga,

  In this case I have no idea, sorry.

  The only thing I can think off is to reset the preferences. When Photoshop sometimes doesn't Photoshop behave.

  But before you do this make sure you save your actions, gradients, shapes, brushes, etc. or you will lose the ones you made.

• How can I add filters just the brush strokes and fill the painting not pencil.

  Sorry, it's pretty hard to explain in the description.

  I want to know is if I can pretty well just select the brush strokes and filling on a coat of paint and have the strokes left alone.

  I want to filter, and then fade brush strokes and fill on the paint layer but keep the sharp pencil lines, I made a paint filling and brush rubbed on a different layer than the pencil strokes, but it takes forever because I draw the image each time twice, using the brush strokes to go along the pencil lines so I can fill it with a color, if I could their blur on the same layer without the pencil strokes then I could fill just the pencil lines the lines with the Brush tool with paint instead of redarwing if that makes sense.

  Here is a picture to show what im trying to reach

  The pencil strokes are on a different layer in brush strokes

  If you convert a movieclip (right click > convert to symbol > movieclip) everything that you want to filter, you can filter it is independent of other objects.

• I recently opened firefox and the lower half of the page is filled with directions to Custom Search Menu Wizard

  I recently opened firefox and the lower half of the page is filled with directions to Custom Search Menu Wizard tried everything and cannot figure out how to get it out. With the help of 3.6.26 version. The status bar is just above Directions, I tried closing all toolbars and nothing gets rid of it. Help, please

  It seems that a recent update of Fast Video Download (with SearchMenu) 4.1.5 broke the version of Firefox 3.6 on their module. You can upgrade to the latest version of Firefox to:
  
  http://www.Mozilla.org/Firefox

  https://support.Mozilla.org/en-us/questions/915364

  https://support.Mozilla.org/en-us/questions/915355

• Bootdisk mysteriously filled with gigabytes of data within a few hours of non-use.

  Machine: Macbook Pro 13 '' end-2013; 16 GB; 250 GB SSD; 10.10.5 OSX

  The startup disk needs a space open to operate of course. After that year, a few weeks ago the macbook pro 13 began to complain that the boot disk was almost full. Very well.

  I moved 9 GB of data to a cloud. With little use, and only a week later, OSX 10.10.5 resumption complained yesterday «startup disk is almost full...» »

  I deleted another 3.9 GB and for the past 12 hours has used the machine almost not at all but in order to check email. This morning, the 3.9 GB of data mysteriously filled with who knows what (files useless virus generated?) and OSX complains once again "... almost full...» "When I check the status of your startup disk it shows 249 on 249 GB is busy.

  (1) is there a reasonable way to see which files were written and where?

  Something is off. I ran scans WebRoot, which is nothing. He never does.

  (2) evidence of experts on what is probably underway?

  OmniDiskSweeper (free download)

  http://www.OmniGroup.com/more>

  When you use OmniDiskSweeper, or any utility that displays all the files...  See the article after if you want to run it as root

  http://www.MacObserver.com/TMO/article/how_to_recover_missing_hard_drive_space>

  Warnings of boiler plate:

  DO NOT delete files in your folder-> library tree as it has things like backups of your iPhone, your emails, your application preferences, etc...  If you think that you found something in your Home-> library folder which can be removed, you must ask first.

  DO NOT remove the files outside your home folder, you can end up removing something essential to Mac OS X and transform your Mac into a costly "door Stop."

  I want to say that you will find a few very large files in private-> var-> vm (these are Mac OS X virtual memory paging files (swapfiles) and where Mac OS X stores the RAM copy when your Mac is paused).  The swapfiles are removed on reboot, and the sleep image will just be recreated when you put your Mac to sleep.

  If you think that you found something to remove outside your home folder, it would be better to ask first before deleting.  There are many examples of people deleting files outside their home folder, rename files, or change the property or file permissions and then their Mac stops running.  Don't be one of those people.  Ask first.

• IPhone 6 deposits fill with music and videos that I download not

  Local storage on my iPhone 6 (iOS 9.2) becomes full. I deleted gigabytes of photos, videos and other applications contained and unused. The Apple app videos guard filling with several gigabytes of videos I do not download. I have changed my Apple ID password and off iTunes syncing with my laptop devices. I never watch videos on my phone and would prefer to just delete the app, but it is not an option, when I hold down the icon of the application. It is the same for the music application. There are 241 MB of music in the application I have ever downloaded.

  How can I stop these videos and download music and use up to my local storage?

  Hello there, avonfluegge.

  Looks like see you purchased elsewhere on iTunes are automatically downloaded to your iPhone 6. If this is the case, the Knowledge Article provides the location where you can change this setting:

  Turn on automatic downloads

  On your iPhone, iPad or iPod touch

  1. Tap Settings > iTunes & App Store.
  2. If you are not already, sign in with your Apple ID.
  3. Turn on the content you want to download automatically.

  You can turn automatic downloads or off via your cellular network on an iPhone or iPad Wi - Fi + cell. Go to settings > iTunes & App Store and tour use cellular data or disable. Mobile data downloads are limited to a file size of 100 MB or smaller.

  Once you have disabled this feature, so feel free to delete any unwanted content using the information found here:

  Remove music, movies, applications and other content to your iPhone, iPad or iPod touch

  Thank you for being a part of the communities of Apple Support.

  Kind regards.

• Scanning with Paint in Windows 8

  Hello everyone

  Here's a video that shows how you can scan with Microsoft Paint in Windows 8.

  Sometimes your scanning software may not work, or your printer may not have a print driver basis. If Yes, you can use Microsoft Paint to scan. Scan using MS Paint will allow you to save them as JPEG, BMP image files, etc. Digitization of paint cannot scan to PDF.

  Scanning with MS Paint can also be used to as a troubleshooting step. If you are having problems scanning try using MS Paint. If it works, then the scanning equipment works properly.

  When you install a printer driver in Windows 8, you can scan using paint from your computer without having to install any additional software to HP.
  
  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  I hope that the video turns out to be useful.

  Scanning with paint, it's quick and easy to analyze something in an image format.

• whenever I try to open any image editing with paint-it tell me it is not a valid WIN32 application

  I click on the thumbnail as usual, then I click on the icon of the painting - but I list asking me what program I want to use to open the file (usually jpeg - but mostly ANY file of the photo.  When I click on paint-i tells me that is not a valid WIN32 application.  It worked perfectly until I was told one have a fake version of windows on my computer.  I have a legitimate version but when DELL sent me my computer the doesn't have to send me a copy of windows, only a so-called repair disc that does not work.  mainly, I just want to open my photos with the paint change.  but I you might fix this confusion with the legality of my copy of windows that would be great.
  I tried to contact dell at this topic but no response yet.  I am physically disabled and the computer is my "lifeline" to my friends and my family.  Please help me with this.  Thank you.  Robert

  Hello B0bman1,

  Thank you for your message.  Let's try combining .jpg with paint.  Please follow the steps below:
  Open Windows Explorer by right-clicking on the Start button and then click Explore.

  Click a folder that contains a file of the type you want to Windows to open in a program you select.

  Click on the file and, depending on the programs installed on your computer, do one of the following steps:

  Click Open with to choose the program you want.

  Point to open with and then click on choose program to choose the program you want.

  The open with dialog box appears. Use one of the following methods to select the program you want to use for this file type:

  List programs, click the program you want to use.

  Click Browse, find and then click the program you want to use, and then click Open.

  Click Look for the appropriate program on the Web to surf the Internet for the program you want to use.

  Click to select the always use the selected program to open this type of file check box if it is not enabled.

  Click OK.
  Found at http://support.microsoft.com/kb/307859
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How the date can be filled with timestamp in dynamic sql

  Hi all

  Below we have sql

  v_stmt: = ' MERGE IN MTH_EQUIPMENTS_EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL = ' | " ' || v_colname | " ' ||') TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME AND

  ED. ATTR_GROUP_ID = TS. ATTR_GROUP_ID)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = 1, ";

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,' | '''|| SYSDATE | "'| ', 1, TS.l_last_update_login, TS.l_updated_by,'|"' | SYSDATE | " ' ||', TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  EXECUTE IMMEDIATE v_stmt;

  After you run the above SQL last date of update in MTH_EQUIPMENST_EXT_B is filled with sysdate but timestamp is not its always 00:00:00. Can we have timestamp also populated through dynamic sql in the last update date

  Kind regards

  Amrit

  Values to hardcode in the dynamic SQL - never use bind variables:

  v_stmt: = ' MERGE IN MTH_EQUIPMENTS_EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL =: 1) TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME AND

  ED. ATTR_GROUP_ID = TS. ATTR_GROUP_ID)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = 1, ";

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,: 2, 1, TS.l_last_update_login, TS.l_updated_by,: 3, TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  V_stmt EXECUTE IMMEDIATE

  With the HELP of v_colname,.

  SYSDATE,

  SYSDATE;

  SY.

• My Android screen is filled with the Oracle Logo

  Hello, I had two problems to solve

  First: I am new to use jdeveloper 12 c to develop Mobile.after ADF oracle Jdeveloper 12 c 64-bit of downloading. I deal with my system of window currently I am going through an oracle tutorial. When I try to test some of the samples in the tutorial, after deployment, the screen of my android emulator will be filled with oracle logo.what is the problem? I need help

  Second: I'm going through this demo on this site:

  http://docs.Oracle.com/CD/E53569_01/tutorials/tut_jdev_maf_app/tut_jdev_maf_app.html .

  I followed the procedure also exactly as it is.but I reviece this error on my 12 c Jdeveloper,error:

  [17: 57:57] application signing...

  [17: 57:57] run command line: ["C:\Oracle\Middleware\Oracle_Home\oracle_common\jdk\bin\jarsigner" - keystore, "C:\Program Files\Java\jdk1.7.0_11\bin\Omile.keystore", - storepass, - keypass, madu123, madu123 - digestalg, SHA1 - sigalg MD5withRSA, "C:\JDeveloper\mywork\Employees\deploy\Omile\Employees.apk", Omile]

  [17: 57:57] jarsigner: certificate chain could not be found for: Omile.  Omile must refer to a valid key KeyStore entry containing a private key certificates chain and corresponding public key.

  [17: 57:57] command-line execution failed (return code: 1).

  [17: 57:57] run command line: "C:\Oracle\Middleware\Oracle_Home\oracle_common\jdk\bin\jarsigner" - keystore "C:\Program Files\Java\jdk1.7.0_11\bin\Omile.keystore" - storepass madu123 - keypass madu123 - digestalg SHA1 - sigalg MD5withRSA "C:\JDeveloper\mywork\Employees\deploy\Omile\Employees.apk' Omile

  [17: 57:57] undeployment.

  [17: 57:57] - incomplete deployment.

  [17: 57:57] deployment failed due to one or more errors returned by "C:\Oracle\Middleware\Oracle_Home\oracle_common\jdk\bin\jarsigner".  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  Thanks for your help

  To the first question, you can check in point 3 in the following blog:

  Deepak Jain blog: Oracle MAF - questions, tips and tricks