My Android screen is filled with the Oracle Logo

Similar Questions

• Is it Possible craate an application or an application with the oracle logo screen when we launch an app

  Hello

  I am new to Oracle MAF

  Can anbody tell me how to remove the oracle logo screen when we launch an application

  Thank you in advance

  Concerning

  Vincent

  Hello.

  The start screen is determined by the deployment of the application profile settings. To replace the default splash screen, you will need to produce a series of files PNG of different sizes and pixel density. The real needs of these files are explained in this section of the documentation of the MAF: http://docs.oracle.com/middleware/maf210/mobile/develop-maf/maf-deploying.htm#ADFMF927

  Once you have produced the images, simply copy you them to the appropriate resources from the application folder, subfolder and select in the "Images of the Application" section of the profile of the deployment, as shown here.

  

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• screen with the apple logo illuminated

  Help! I have an ipod nano 7th generation. The screen stays on with the apple logo and will stay on until he dies. He died not even when I try to turn it off or restart. It turns off for 1 second and back on the screen turned on.  It does no disk mode more. What can I do?

  Try to restore the device

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I can't access my music library on my iPod 5th generation touch, although he was previously synchronized. When I press the icon of the music, I see a screen with the Apple logo and the word 'music '.

  I can't access my library of music on my iPod Touch 5th generation with the latest OS. When I press the icon of the music, a screen with the Apple logo and the word 'Music' only, not my list of playlists, artists, or songs.

  I myself have solved by doing a reset.

• SSRS for lack of outer join with the Oracle data source

  It seems to be a problem with the Oracle driver used in the Reporting SERVICES query designer.

  When you use an Oracle data source, if I create an outer join in the graphic designer, it automatically inserts '{OJ' before the join and '} ' after her.  This is an incorrect syntax for Oracle and refuses to start.  The curly braces and the JO editable in designer text, but if I go back to the graphic designer and immediately to reintegrate them.

  Only, this has started to happen a year or two ago - before that it worked, but with the old (+) syntax.

  Can it not be healed?  It makes things very difficult.

  -Geoff

  Hi Geoff,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the Forums of the Oracle Support; We recommend that you post your query in Oracle Support Forums to get help:

  https://forums.Oracle.com/forums/main.jspa;JSESSIONID=8d92100c30d8fb401bcbd10b46c38c9ddf1a3242549a.e34SbxmSbNyKai0Lc3mPbhmSc3aNe0? CategoryID = 84

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer

• I get a screen blue with the Dell logo on it and no office mouse pointer or even. __

  Remember - this

  Only, I get a screen blue with the Dell logo on it and no office mouse pointer or even.

  is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Check with Dell to see if there is a disc of diagnosis of material that you can download or order for your computer to test and see why it is not booting.  Also check the LEDs on the front that can display a code error, or for a series of beeps which may indicate an error code.

  "Arlingtonal" wrote in the new message: * e-mail address is removed from the privacy... *

  * Remember - this *.

  I get a screen blue with the Dell logo on it and no office or even the mouse pointer.*

  is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  * You have problems with programs
  * Error messages
  * These recent changes made to your computer
  * What have you tried to solve the problem

• expdp with the Oracle Wallet closed?

  Can you expdp with the Oracle Wallet closed without receiving an error ORA... I guess not, because I can NOT FIGURE IT OUT...

  Hey Joe,

  Not possible AFAIK. The encryption associated with command line switches all wear them on encrypting the dump files and nothing else. The only way for datapump to read the data of transparent data encryption is if the portfolio of database level is open. This is possible at the level of the database with an alter database command.

  I think you're out of luck, you'd have to somehow coordinate when you extract with when the team opens the wallet.

  See you soon,.

  Rich

• I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to do the ph

  I have a request for a phone number in my HTML code in my database which is automatically filled with the correct sales phone number when sending emails. I create HTML code in dreamweaver and then put the code in my e-mail program. I need to make the phone number in the clickable query. I know the code to do it well not in a query. What is the code?

  As far as I saw, most of the smartphones will automatically recognize it these days, as long as the number is written in a format of regular phone number. This format also allows to make images or text other than a telephone number in a tap to call the link.

  Looking at what you have presented I guess it would be something along the lines of...

  urmcell>>">urmcell >

  When the location of the link and the link text would be the same variable.

  I've never worked with Intelliclick so above is a wild guess. They would be those who need to ask themselves if there is a way to fill in the address of a link like that.

• BAM works with the Oracle database only in the backend.

  Hi, I was wondering if Oracle Business Activity Monitor (BAM) implemented in ADF application works with the Oracle database as Oracle database is one of the databases very little supporting the database change Notification? Or can it be implemented using database of MySQL etc.
  
  Thank you!
  
  Published by: 996574 on June 3, 2013 14:06

  As far as I KNOW only Oracle db supports the database change Notification.

  Timo

• Keyboard shortcut for fill with the color layer are opposed on my PS CS6 OSX install help?

  Hi all

  I'm kinda a noob and following a tutorial... and found something strange and I wonder if you could help me understand what is happening.

  I have Photoshop CS6 extended on a macbook pro (late 2011).

  I am running OSX v 10.7.5

  I'm the long and the instructor has added a new layer. I did it.

  He then filled the white layer which is its background color (it has foreground black, white background). I have same evidence / background colors.

  Now I thought on mac to fill with the foreground color, you hit Apple + Delete and to fill it with the background, press Option + delete

  It's the exact OPPOSITE for me. I hit Apple + DELETE (or even BACKSPACE) and filled it with my background color, which is white

  If I hit Option + DELETE (or RET.), filled it with my foreground color.

  I tried searching in the area of keyboard shortcuts change... but I do not see these settings anywhere.

  I have an external keyboard plugged into my mac. It is a 3rd party one, but seems otherwise never function normally.

  Keyboard here is: http://pckeyboard.com/page/UKBD/UB40P4A

  Any suggestions why my shortcut keyboard for a fill with the color layer could be reversed?

  Thanks in advance,

  CC

  Looks like it doesn't work as expected

  keyboard shortcuts in Photoshop to paintng:

  https://helpx.Adobe.com/Photoshop/using/default-keyboard-shortcuts.html#keys_for_painting

  

• I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages

  I installed the 12 elements, it does not open, a screen will appear with the options e-12 and 4 other languages.  When I click on 12 items, a screen will appear with a red install icon, I click and it askes for the serial number. It won't let me type in letters digits only. Already, I have the serial number once. How to make this work? I don't want to be a programmer!

  attach a screenshot of what appears after clicking PES 12, http://forums.adobe.com/thread/963429