learning of the problem

Similar Questions

• TB stopped to retrieve new messages and try to "reconfigure" my account to correct the problem, now, I lost my old messages.

  [15/04/14 edit #3] I posted the troubleshooting information and make a backup of profiles with MozBackup, so my problem is the presence of two inboxes, both to receive messages, and my not be sure we can safely be removed nor how to remove safely.
  [14/04/14 edit #2] Help of you bird taught me where my 'profiles' are stored but I found that I had no backup of their. However, I find now that I have TWO inboxes - had not noticed this before oddity. Fortunately, one of them contains again all my old posts! The Inbox that has still all my old messages is listed as a subfolder under "Local Folders" and the Inbox I thought was that my only Inbox is listed as a subfolder under the folder albums whose name is my email address. Two inboxes are now recover my new mail. Does this mean that I have somehow created two accounts? If so, how can I get rid of the account that uses the Inbox that has all my old messages inside? I don't want to get rid of the wrong account, but I suspect that the "right" should be listed under my email address, not covered by 'Local Folders'. If anyone understands this mess I created, I'd appreciate some tips so that I don't make things worse. At least, I have now learned what it is I need to back up.
  ..........................
  [14/04/14 Edition #1] This is a major update of the problem I described earlier (see below). I disabled the part Mail shield of my antivirus software Avast free and discovered that TB was again able to recover my email. Then I re-enabled Avast to see if it blocked again TB. He did not. So, apparently simply light shield mail out of Avast and back again seems to have solved the problem. However, there's now the consequences of my having tried to "reset" TB which is described below, namely the loss of a very large number of emails that have been stored in my Inbox. So the problem is I would like to get help is how to recover these apparently lost emails. If they stay on my hard drive, should TB to store and what specific files I look for? I do not have a backup of some of my drive hard (but), but I need to know how to identify them, where to look and how to get back to my Inbox without deleting its current content. I would really like to also retain their original, if possible dates. I'm under 64-bit Windows 8.1. [end edit on 14-04-14]

  ................................................
  TB suddenly stopped downloading my mail today. When I click Get Mail, I can see the screen very fast succession of messages; first the message "connected...". «, then «check...» ", then"download 1 of 10... ". ", and finally,"No message to download"after downloading absolutely none of them. I also noticed that my list of mailboxes not the entry of first showed my e-mail address as account name. Find that something important must have been changed in the setup of my account, I went through all the settings but didn't see any problem. Finally, I decided to try to restore my account even. Who did place my email address again back at the top of the list of mailboxes mailbox as my work account name, but he also created an even more serious problem. There is now no messages in my Inbox, I guess because I have created a new account using the same name as the old, whereas before there were thousands of messages I had saved for many years (since it is a business). Then when I click Get Mail, TB downloaded 383 messages that have not yet been removed from the server, which then gives all today (another loss since their initial dates were important). But after that he finished all the download, by clicking Get Mail still retrieves all messages past the time he stopped to recover earlier today. These new messages remain on the server - but now there are 14 of them instead of 10. The same succession of messages TB appears at the bottom of the screen, but now it says "Download 1 of 14..." but always downloads none and ends by, "no message to download. This sequence of messages will repeat as many times I want to pick up the mail but she can still count how many is NOT download. Two questions: (1) are the thousands of messages that have been stored in my Inbox always stored somewhere on my computer and is it possible to recover? (2) how can I get TB to begin to recover my current email again? I guess it's obvious that these are important issues for me and I am completely puzzled. Thanks in advance.

  I managed to recreate the same question.

  It's what, in my view, has occurred.

  The account that puts e-mails in local folders is set up as a global Inbox account.

  The account which has its own mail, mailbox is a classic e-mail account.

  When you created the global account to the Inbox, you have not restarted Thunderbird before you download, so the same e-mail is downloaded in the two accounts.

  E-mails currently in the global Inbox - Local folders Inbox is not deleted if you delete the account. but do not immediately.

  Please look under "Tools" > "account settings".
  You see two accounts with the same name using the same email address? I noticed you have account 2 and account 5 using different servers, but maybe the same e-mail address?

  Select the 'server' settings account 2 and click the button "Advanced".
  A small window opens, which is selected?

  • "Inbox for this account of servers.

  or

  • "Inbox for the account of different" and "records the.

  Please also check account 5.

  One of these accounts will say "Inbox for the account of different" and "records the. This is the account that has emails in the Inbox folders and is configured as a Global account.

  Tell me which account is configured as global Inbox.

  In addition, I note that account 2 has more than one identity. You have two different email addresses that go to the same account?

  • In 'Tools' > 'Account settings' for account 2
  • Click on the button "manage identities".

  If you have two email addresses, and you want both emails go into this email account, then leave it alone. Click "close".

  If the two identities are the same (identical) email address, then there is no two, so you can delete the other. Select the second identity email address and click 'remove '. Then, click Close. If not sure leave it alone, but tell me what you have.

  Click OK

  Tell me what you have and if you have two email addresses the same as the identity of this email account and also if you have deleted the second email address.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• Windows Media Player encountered a problem while playing the file. For any additional help, click Web Help.You met C00D11B1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  I tried mp4 videos with no no not all success.have tried quick time, VLC, divx with no luck.movie readers has been downloaded on the internet, no picture or sound

  Hello

  ·        Were you able to play videos mp4 on the system before with no problems?

  ·        Where did you download videos (site)?

  ·        You are able to play the other format of file on the system without any problems?

  ·        You are able to play these video files on another computer?

  ·        Have you installed the third-party codecs on the system?

  I suggest to play another mp4 on the system and check if you're able to play the movie or not.

  If you do not have to install codecs on the system, then I suggest you to install the codecs on the system and check if the problem is resolved. To learn more about codecs, see the article mentioned below.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  I suggest you return the item mentioned below.

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D11B1&ContextId=87&OriginalID=8889000A

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

  I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding
  
  Windows can't check for updates, error code 800FFFF.

  I tried some of the recommendations varied on this site, but so far without success.

  If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

  I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

  I checked for malware and repeatedly tried to system update readiness tool.

  Any thoughts?

  Some information on my system:

  OS: Vista Edition Home Premium
  Version: 6.0.6002 Service Pack 2 Build 6002
  Model: Inspiron 1525
  System type: X 86-based PC
  Processor: Intel Core 2 DUO CPU
  The version of the BIOS/date: Dell Inc. A16, 16/10/2008
  SMBIOS Version 2.4

  Hello Jason.

  I suggest you try the following:
   
  close and exit all the open documents or windows program you have open.
   
  Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
  [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
   
  Note => for best results, check the option to remove personal settings.
   
  NEXT
  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
   
  1B. make disappear/close the pop-up window "automated troubleshooting! -then...
   
  c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

  2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
  When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
   
  If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
  Those that are marked as "optional" decline.
   
  Have infinite patience so that it scans and it's work.
   
  When you are prompted to restart Windows, please do. Allow it to restart.

  If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

  Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Device: usb fax modem; fatal error, what is the cause of the problem?

  using my usb modem-fax, the result is fatal error, the response of the device that I can't send your fax due to an unexpected error, pls help.

  I already installed and installed the device, remove and installed gain but the problem still there, pls help.tnx

  Duplicate the content of the Post-

  USB FAX MODEM FAIL TO PERFORM

  'THE FAX CANNOT BE SENT BECAUSE OF AN UNEXPECTED ERROR' IT IS THE MODEM ANSWER AFTER DIALING THE NUMBER, BUT BEFORE IT WAS OK, PLS TELL WHAT IS THE CAUSE OF THE PROBLEM AND TO SOLVE IT, TNX

  Hello

  
  1. What is the error code when printing / fax fails?
  
  2. What is the brand and model of Fax Modem?
  
  3. use an internal card for your fax and modem functions or an external modem?
  
  4. what was the recent change in hardware or software performed on the computer before the question?
  
  Please follow the links below to solve the problem.
  
  Method 1
  
  Check the compatibility of the device in the Windows 7 Compatibility Center.
  
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=fax%20modem%20&OS=32-bit
  
  Note: Check the categories of SOFTWARE and HARDWARE.
  Method 2
  
  Follow the links to help resolve the fax modem
  
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan
  
  Reference, the LEARN Section.
  
  Method 3
  
  Uninstall the program interface for Fax and reinstall it from the manufacturer's website.
  
  Run the uninstall program tool set up to help install questions.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Also follow the instrunctions from the link below.
   
  Solve fax problems

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

   

  Applies to Windows 7.
  I hope this helps.

• I tried to fix the problem yourself, but I can not

  I tried to fix the problem yourself, but I can't make it work...

  Well, I want to download an application or update my programs, so write "error".

  When I click on help, then I'll just in the page start or something...

  Maybe I missed something, but at least I need help

  Hi Isabelle,.

  Please try:

  1 try to clear the temporary files folder.

  2. restart your machine.

  In case you are still facing problems, click on learn about the error and to share with us the exact error or you can contact support for assistance: contact customer service

  Kind regards

  Akshay

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• the problem of reuse based on the functions

  I read the text in quotes as follows a book written by a Microsoft Developer. I googled and found a good number of citations of it, but did not find any explanation.
  
  ============
  With languages like C, the basic unit of re-use is the function. The problem with reuse based on a function, is that the function is coupled to the data, he manipulates. and if the data world, a change to a function in the context of re-use infringes another function used somewhere else.
  ============
  
  C using the libraries widely, which is to reuse based on functions. Kindly can anyone give me a scenario where this problem occurs?
  
  Java is usually based on objects for reuse, and I confess that my question is not a Java. But I think that would help to better understand the concept or the benefits of the Java language design. So, thank you for allowing me to ask this question here,
  
  Published by: 799160 on September 30, 2010 12:38
  
  Published by: 799160 on September 30, 2010 12:57

  That's what I came to read the quote you posted:

  I guess something like the following might happen:

  You (being a person in General) have received a class change. You examine the code for the first time, and it has a bunch of methods and variables of class in it. Some methods use class variables. How can you be sure that if you change the functionality for editing a class variable in one method will not affect the other methods when they are used? This problem can be solved by learning everything that is and how it interacts, the correct way to use it. But then again, if you don't think about it and to make changes... Oops!

  -----

  Maybe another abstract example would be wise:
  Imagine a calculator that could be used by 2 people at the same time? I bet it would come with a few funny answers :)

  -----

  I hope that I wrote a short example of this, he makes some sense:

  public class SuperBigProgram
  {
       private int globalVar;
  
       public static void main ( String[] args )
       {
            new SuperBigProgram();
       }
  
       public SuperBigProgram()
       {
            System.out.println("I'm a super big program.");
  
            globalVar = 0;
  
            //Let's pretend these series of events occur during the program:
  
            doItHighChanceActivity(); //1
            doItHighChanceActivity(); //2
            doItHighChanceActivity(); //3
  
            //Whoops super rare event occured!
            doesNotHappenALot();
  
            doItHighChanceActivity(); //4????    but is really 5.
       }
  
       /**
        * This happens A LOT!
        */
       private void doItHighChanceActivity ()
       {
            superUtilityMethod();
  
            System.out.println("globalVar: " + globalVar);
       }
  
       /**
        * This utility method does some awesome utility stuff for our Super Big Program.
        * This changes some global data.
        */
       private void superUtilityMethod()
       {
            globalVar++;
       }
  
       /**
        * This does not happen a lot, if at all.
        */
       private void doesNotHappenALot()
       {
            //Hey I don't happen a lot but I'm reusing this really cool utility method that contains global data...
            //Code reuse for the win!
            superUtilityMethod();
       }
  
  }
  

  Here is the result:

  I'm a great big program.
  globalVar: 1
  globalVar: 2
  globalVar: 3
  globalVar: 5

  Published by: kilosi on Sep 30, 2010 13:22

• Netflix DAB the problem has been fixed?

  I noticed a lot of discussion on a problem I had with Netflix using my Sony BDP-S380 reading.  As I watch the random programs I get constant stamp every few minutes.  It may start immediately or later in the program when I first got interested in the program - which is very annoying.

  I have concluded, as others have on the discussion, Sony servers must be the problem.  I observed impeccable look using a laptop while getting DAB constant with the unit Sony - both at the same time on the same connection, the same program at the same time in the program.  All other aspects of my blue-ray player work as expected.  I even tried a borrowed device from ROKU replacing the Sony and observed no problems with my home network, my network ISP or Netflix.  I must therefore conclude a Sony problem, so the question.

  Should I trash the Sony and purchase a non-Sony product?

  The unit requires a minimum speed of 2.5 Mbps or higher for videos in definition standard and 10 Mbps or higher for videos high definition. Go to www.2wire.com to check the speed of your network.

  Make sure that the drive is up to date with the latest version of the firmware. The latest version of the system software can improve the stability of the Internet. The version of firmware available for your drive is M06. R.0624.

  This problem occurs only with Netflix?

  To learn more about this problem simply click on the link below.

  https://community.Sony.com/T5/Blu-ray-Netflix-online-video/video-freezes-or-rebuffering-appears-when...

  If my post answered your question, please mark it as an "accepted Solution".

• Messages of the Sierra and the problems of continuity iMessage

  I took these communities to try to resolve a problem which, for me, is as old as the first day iMessage became available for Mac.

  I can't emphasize how incredibly boring, it is completely out of sync how both are. The problems are always the same:

  (1) never are conversations in the issue of order/same on both devices. For example, for a conversation that has been exploited to iMessage on my iPhone, when I open my Mac, it appears in the notifications, like new. All the answers are there.

  (2) a conversation that has been deleted from the iPhone suddenly appears on the opening on my Mac... seriously?

  (3) the conversations that are deleted on my iPhone does not disappear in the Messages and vice versa.

  To sum it all, pretty much the case is that both apps, while they expected to work simultaneously with fluidity to do what they want when they want.

  This has been a problem since iMessage became available on Mac OS for the first time (think it was Mavericks). I've been waiting for Apple to fix this with each software update to make OSX or iOS. But guess what...?

  My Mac running OS Sierra and my iPhone 6 s more running iOS 10.0.1. Everything that could be activated in so that they can work together has been activated and triple checked. I would really like to know if anyone has a way to fix this or if there is other people are having the same problem.

  Hello

  An excellent explanation of exactly how iMessages works on iPhone and Mac.

  It does the same thing, if you add in an iPad or and iPod Touch.

  iMessages are pushed, the Treaty is called, for devices that have been associated with (by adding the Apple ID on an iPhone).

  This means that it is not as Mail where are read from the server and in the case of a POP account you can choose to let the "message" on the server if other devices can read.

  IMAP accounts will be synchronized as you say but POP will be more like the Messages app with iMessages.

  The iMessages which is addressed to you are marked by the number of devices is in the opportunity to see it.

  He pushes the devices until they respond (Accept) once this device has accepted it is removed from signage and only devices that did not have a chance on seeing.

  There is a time limit on how long the iMessages is pushed to a device (such that being away from your Mac turned off everything on vacation or phone that died or was out of range of the carrier)

  Once the device have the iMessages it is removed from the server.

  A simpler view is that the iMessages is "copied" and sent to each device and that each device can not see the other "versions" and that each "copy" is deleted from the server that happens on the device.

  The news to "read" your comments, you might see comes that of the device, it was intended to (i.e. addressing a number only the iPhone to another end may, so together, to send the reply 'read').

  Same thing with sent.  This is why you get a response, when he showed even "Delivered" as someone can answer from a connected device.

  This means that the 'Sync' is really only show on all devices and nothing do you on one device will be the effect of the other.

  It is not broken, even if this isn't what you think that told you about the device.

  You can tell them http://www.apple.com/feedback/messages.html

  

  20:31 Saturday; October 1, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• The problem of mobile safari search engine

  If you set your iPhone like China location. The mobile safari will put like google.cn search engine. But Google has pull out of China.  If you are looking for something with google.cn. Google will give you a picture.  You must click on the image and go to the google.com.hk.

  The google.cn is no longer! We need google.com!

  Please edit the files:

  /Applications/MobileSafari.app/SearchEnginesFallback.plist

  TopLevelDomains CN = > COM

  Apple is not regularly monitor the discussions. These are mostly a user in discussions.

  Send feedback to Apple. They will not respond, but at least know that there is a problem or a suggestion for change. If enough people send feedback, it can get change / suggested the problem solved as soon as possible.

  Your comments

• Lost a lot of contacts after ios 10 update, don't know what the problem is?

  After update of ios 10 I lost many of my contacts who have been saved. Went into settings, everything's fine, having a lot of problems doing my business, can you please say how the problem will be solved? Impossible to do a lot of my regular work. The problem must be solved urgently.

  Where exactly to save your contacts? Have they synced via iCloud?