Help! System does not find the specified path.

Similar Questions

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Backup and restore error "the system does not have the specified path. (0 x 80070003) »

  Original title: Backup and restore SkyDrive errors

  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My Documents. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My music. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My photos. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\WINDOWS\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem in videos C:\WINDOWS\System32\config\systemprofile\SkyDrive\My backup file. Error: (System does not find the specified path. (0 x 80070003))

  The above folders/files have been written not the system image.

  For my mistakes, I uninstalled skydrive and deleted the shortcut created in the bookmarks and folders moved to another location remove skydrive folder and re-run the backup and restore tool.

  Then everything worked well for me.

  Saved once installed skydrive...

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Windows Installer service is stopped 3 error "the system does not have the specified path.

  Original title: Windows Installer Service is stopped

  When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
  Misconception # 3 "the system does not have the specified path.

  Hello

  Try the methods below and check if the problem persists.

  Method 1:

  I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2:

  You can also try running a Scan SFC (System File Checker):
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

• (CSCService) offline files service fails with the error "the system does not have the specified path.

  I have Win7 both 64-bit systems upgraded to Win7 pro in a domain environment (Windows 2003 server).

  Both systems fail to start (CSCService) offline files service with error "error 3: the system cannot find the path specified."
  Best I can tell, it is related to the upgrade process, but so far am unable to identify a work around.
  Someone at - it recommendations?
  Thanks in advance!

  Since it is a new installation, the best way to solve this problem would just reinstall Windows.

  The community forum is more oriented to home users where the Technet forum is aimed more at business users. Due to potential complications with a domain environment, it is why you have been asked to create a new post.

  Here is the link to the Windows 7 IT Pro forum:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Pop - up message says: "the following error is produced during importation SAM_0012.JPG the system could not find the specified path.

  I tried 2 different camera SD cards and the same message appears. I used two cards previously and it charged fine images, without any problem.

  It is said the message above with each photo and does not load anything.

  I tried 2 different camera SD cards and the same message appears. I used two cards previously and it charged fine images, without any problem.

  It is said the message above with each photo and does not load anything.

  ===============================
  If you insert the SD card into your Media Player and
  Reach... Start / computer... can you right click the icon
  for the removable disk that corresponds to the
  Media SD slot player and display the contents of the
  card?

  If... Yes... maybe you can copy and paste or drag and drop to
  a folder on your hard drive. John Inzer - MS - MVP - digital media experience

• Does not start some windows services "the system does not have the specified path.

  

  I can't start some programs for some reason any D:

  If this is a recent problem and then system restore must repair.

  If you are experienced with maintenance of Windows, you must consider these details of registry:

  

  If you have no experience at this level, then you will need to ask a computer-savvy friend to help you, or have the service machine. Note that also snippingtool.exe is a much better tool to take screenshots that the method used.

• It seems that I got some kind of virus that wiped out my registery because files that whenever I try to run a program an error pops up saying that it does not have the specified path.

  pretty much my title says it all, I can not install anything, I get the same error, the only thing I can do is to get online. is there a way to restore my files online tracking, I have not my installation disc either. is there a way to remove viruses, malware, etc. online because everything I download and try to install I get the same error

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I had received a record of failure of a file error message and when I tried to follow measures to correct by adjustment files he told me that the system does not find the files

  I got the error message, shortly after I upgraded to service pack 2 windows xp with service pack 3.  When I try to start in safe mode or in an earlier era, the computer stops at the 32\drivers\mup.sys system.  Then it goes to the blue screen which gives me the error message of failure of a registry file and begins to clear the physical memory on the disk.

  And what happens when you try to start in Normal Mode?

  Have a HP or Compaq PC? If Yes, read on:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284
  If not, let us know. Also, have you tried install SP3 with an antivirus running on board? (That's a no-no!)

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">