Help the development of the HAL during imaging using SCCM

Similar Questions

• Which is faster a bit manipulation to the table or image using the vision

  I have to perform an operation on an image.  It involves the calculation of the new locations for the pixels for each pixel of the image.  Which is the fastest way to do it.  Manipulate the pixels as elements of the array for loops, or manipulate the pixels of an image using vision tools?

  Thank you.

  Hello

  If you can use vision tools to make the manipulation of pixels, it is much faster.

  Vladimir

• help the acquisition of images only when the light is on

  Hi, I need help to create an instrument.

  I need to create an instrument to:

  I have a black box with a camera. This camera will be connected to the pc via the USB port. When I press a pedal strong light comes througt it.

  I need that labview shows an image in real time when the light comes and stops showing the image when the light goes out, showing the last structure that was light. It's like a system called last taken image.

  for example:

  I have a pedal that start a strong brightness. LV doesn't show any picture, when I press the pedal and lights in LV stars to show the image when I stop pressing the button LV displays the last picture or image that was light. If he starts another moment to press the pedal LV begin to appear the new images until I stop to press the pedal.

  any idea?

  Thank you

  Jorge

  that is going to be there to help you use

• Helps the recovery of images on USB

  Hello

  I cut my hard disk images and pasted on my external flash drive, flash player displays the folders but no photos, can anyone help me to recover my pictures please.

  Concerning

  Karl.

  Hello

  You can try this program:

  http://www.Piriform.com/Recuva

• help the guitar hero automated using labview

  Hi, Im working on my final project for a class e and Im making a guitar hero automated using labVIEW and vision builder. I already have all the buttons and the strum bar, but I need help with the whammy bar. My problem is that it should only work on the notes which take more time with a single click, I think I should add some time delay (or something like that) so if the camera sees the note more times the amount of time its will send a signal to the solenoid to continue to press the whammy in intermittent form bar (I think I need a square to wave this) part).

  I'd really appreciate if someone can help me or show me an example implementation of the part.

  Here is a video of a similar project without the whammy bar

  Edit: Im using a NOR-cDAQ 9472 module for output on a digital OR cDAQ 9171 chasis USB

  Thank you

  Javier Morales

  Dear Javier,

  It sounds like a cool project work.

  Why not try wiring of the output of the shared in a shift register variable to retain the previous values and compare the old with the new value using a door and.  You can connect to a wait function in your loop and wire abour 100ms, normal human reaction time, while is the button held for two cycles this triggers your whammy bar.

  I hope this helps.

  Kind regards

• What is the practical limit to the number of images using the Bootstrap carousel?

  Usually three or four images show the demos and tutorials. Can I charge realistic 107?

  What kind of things can be wrong with that?

  107 images should always load and very probably kill with unwanted bandwidth mobile data plans.  I would use 5-6 images in a full-sized carousel.

  Maybe you should do is a gallery of thumbnails like this:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  Nancy O.

• Cannot find the Gallery of images for screen saver in Windows Xp

  Original title: Gallery photograpique for screen savers

  I can't find the Gallery of images used in my screensaver in old computer to copy to the new computer. Windows XP Home Edition is my op system.

  Hello

  Start/Search/*.jpg should be able to locate the folder, though it may take a little. Or, check the settings for the screen saver on the old machine to see which directory is used.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• No image Optiplex 5040 with HDD of Lite - on - Windows 7 using SCCM NVMe

  If all goes well, this is the right place to post this.

  I'm having a difficult time of imaging Windows 7 on these Optiplex 5040 that come with the Lite-on is using SCCM HARD drive.

  Here's what I've done.

  1 inject KB2990941 and KB3087873 in my wim file
  2. Add controllers RAID/AHCI Intel Chipset version 14.5.2.1088 from the cabin of 10 WinPE off Dell in my boot image.
  3. I tried imaging using legacy/MBR.
  4. I tried imaging using UEFI/GPT.
  5. tried to RAID and AHCI.

  The problem is that after you download the image reboot to start the setup of Windows, Windows 7 to the logo screen freezes and restarts.

  I think that it is a driver problem related with the 5040 cab file. If I do not install the drivers specific to the model of the machine, at least I am able to get into Windows and log on locally, but the process does not end because there is no network driver. Unfortunately, it was not a package of pilot updated since May.

  If anyone has experienced this?

  Of reference articles:

  Yes, remove the two drivers Intel USB 3.0 of your driver package. I tried to add later in my driver package and it still does not work, but they can be installed after the fact that your image is complete.

• For help. DLL file / library call for the USB camera Image data file

  Hello

  I'm new to the use of the library and imaging data files. Attached is a picture of the "call library leader." I don't know how to set up the entry of 'beef' / frame buffer.

  More information is explained in the attached PDF file.

  Basically, I just need to recover data from image and convert it to a real image. I sought help of LabVIEW and other sites files, but I can't find a clear solution. Any help would be appreciated.

  FYI - I can communicate with the camera using other functions of library file. Opens the camera, I can set/view KING and other data. I can't quite understand the frame buffer.

  -griplegraple

  
  

• Is it possible to increase the width of the panels on the left and right if the sides during the import of images?

  Is it possible to increase the width of the panels on the left and right if the sides during the import of images?

  Lol the side panels in the import window are of fixed size.

• In Muse miniature slideshow container, I have images where data in image properties can be set. SEO search engines see the data and help the visibility of my site?

  In Muse miniature slideshow container, I have images where I can insert the data of image properties. SEO search engines see the data and help the visibility of my site?

  Post edited by: Howard Lower and rewrote the question because I have yet to get a response.

  Yes, they will be included in the report.

  Please check these links:

  https://helpx.Adobe.com/Muse/how-to/add-alt-text-and-ToolTips.html

  https://forums.Adobe.com/thread/1747973?start=0&TSTART=0

  Thank you

  Sanjit

• During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  There is an option in your Lightroom preferences, under the general tab, "treat JPEG files next to raw in form of images". If you have this option is checked, then Lightroom will import and view your first two and JPEG files. You use the active D-lighting on your camera? If you are, you must disable this feature.

• definition of the background image of the file during execution

  So, I have another issue to resolve and my migration to 11.5 will be complete.  In the previous iteration, the project has been able to set the background image from an external file dynamically during execution.

  After the migration, it seems that the projector keeps the canonical path to the image of Member and looking for him there. In other words, loads of projector, but a file finder opens, saying: he cannot find the background image in the path of the source machine Director.  Setting the name of the file in the jargon does not stop this behavior doesn't happen.

  I tried to re - import the image as "link to external file" (which had the same results) and flat import (which does not load the file during execution, even if I put the file name in the jargon).

  Anyone know how I can do this, the value of the background image of a file during execution?

  Thanks in advance!

  I do it all the time.  Just make sure that the image is in the same location relative to the projector that's director file.  The easiest way is of course if the image is in the same folder as the .dir file, in which case, you'd sure as to put it in the same folder as the projector, and you can set the name of the file using:

  Member ("someExternalMember"). FileName = the moviePath & "filename.jpg"

  You can have it in subfolders as well if you want to make sure that the relative location is the same.

• Need help to set up the text over an image using skin

  As I understand this book.  For page numbers, the master page I use an image with the Page number marker current at the top of the image.  I want to be able to define the image so that the text on other pages will wrap around it.  The problem is that it pushes the current Page number marker, so I can't keep the number on top of the image.

  How can I set this up properly?

  Select the block of text with page number. Object > text frame Options. Click ignore skin.