No image Optiplex 5040 with HDD of Lite - on - Windows 7 using SCCM NVMe

Similar Questions

• View Crash Driver Optiplex 5040 using Excel

  We have 3 new Dell Optiplex 5040's (i7, 8 GB Ram, 500 GB HARD drive) with no gpu addon.  On all computers, the display driver randomly crashes and retrieves all using Excel 2010.  I updated to the latest drivers to display, off hardware acceleration in Excel and extended the timeout of the display driver in the registry.  The difficulty of recording made longer between hangs, but has not fixed the problem.  Any suggestions?

  All,

  We find that the same questions about 5040 Optiplex computers of desktop and laptops Latitude of E7x70 (all to come with 8 GB of RAM and 128 GB SSD)

  We are running the latest Bios (1.2.7 on the desktop) and Win7 64 bit / Office 2010 32-bit

  There seems to be Skype for business (Lync.exe) which then blocks the display driver resets... we get the following in the event log, although most users report that they use Excel when the accident occurred.

  The failing application name: lync.exe, version: 15.0.4809.1000, time stamp: 0x56cbfaf2
  The failed module name: igd10iumd32.dll, version: 10.18.15.4279, time stamp: 0x55db7e87
  Exception code: 0xc0000005
  Offset: 0x000485a3
  ID of the process failed: 0x1e54
  Start time of application vulnerabilities: 0x01d1c255ddccd0a6
  The failing application path: C:\Program Files (x 86) \Microsoft Office\Office15\lync.exe
  Path of the failing module: C:\Windows\system32\igd10iumd32.dll
  Report ID: 76d06a76-2e4c-11e6-85f9-1866da0201f0

  Given that our image has been produced, Dell has released some new display drivers - one I tried the Dell site didn't fix the issue and none have an Intel but I am testing now one published by Dell may 24 it seems to have fixed if all goes well!

  The 5040 is version A07 20.19.15.4454

  (the previous ended with 4390 A05)

  I noticed that they released an updated driver for the laptop E7270 on the same date, so maybe apply the same fix.

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• An image work gold with all dell computers?

  Hello
  I am new to Dell image help so I want to know that the image created by DIA will work with all laptops dell and computer?

  Hello, ImageAssist An image will work with most Dell Latitude, Precision and OptiPlex systems. Some XPS and place systems as well. The operating system must have been offered on the system of the factory for drivers to be available as well. [See the complete list of systems supported at this location: en.community.dell.com/.../11438.dell-family-driver-packs:550:0]

• Q: can you Optiplex 990 (with i7-2600 and 265W PSU) run a 750Ti?

  Dear people,

  Recently, I bought a refurbished DELL Optiplex 990 with 8 GB of RAM and i7-2600 and I am very satisfied with this system, but I would like to run some games on high (ish) definitions.

  That is why I want to upgrade the system with a GTX 750 Ti graphics card (for example: Asus NVIDIA GeForce GTX 750 Ti STRIX).

  My question is:
  can the original systems 265W PSUS provide enough power for the upgrade? Or should I upgrade the PSU as well to have a stable operation?

  These 750Ti are originally designed for low current systems (they won't be able to take the PCI-e slot - max 75W - and have NO auxiliary pins). The Optiplex s 990 can be delivered with an ATI graphics card (with a circulation of ~ 68W of PCI - e), moreover specifications document 990 States that the PCI-e slot on the motherboard is evaluated with standard 75W.

  On the other hand, I think that this upgrade can really stretch the limits of the system, add more hard drives / RAM and/or insert some USB devices and the power supply isn't able to take it.

  Model: Optiplex 990
  PSU: dell d3d1c
  Power supply: 230 VAC
  PC: i7-2600, 2 DIMM DDR3 RAM (8GB total), 1 HDD (500 GB)

  While slowed the machine display but play games the machine will restart and crashed due to demands for more power that the unit can provide.  Standard CS750M of Corsair adapts well to the minitower.

  There is no upgrade for the smaller models.  I don't think Booster 450W power units no longer exist that fit into the optical drive Bay 5.25 inches.

  http://www.Newegg.com/product/product.aspx?item=N82E16817104054

  

  

• Problems with drivers in Lite Touch Deployment (WinPE 6.2.9200, deploying 7 x 64 ENT)

  I'm trying to deploy Windows 7 x 64 enterprise on a laptop that is not our standard specification and ordered as only once without prior testing.

  When I have PXE boot since our deployment server, it loads boot.sdi and the trunk. WIM successfully, but I get so a mistake a network device was not a driver loaded for WinPE could not connect to the deployment server.

  Try to resolve what I have:

  > Download the appropriate Windows 8 LAN driver from the manufacturer's website

  > Imported it out-of-box drivers in MDT

  > Checked in the properties of the driver that the seller and the device listed in the error ID appear in the list of supported devices

  > Updated the deployment share

  > Imported the updated boot image to WDS

  This could not solve the problem, so I tried importing the driver directly in WDS and adding to the image manually boot. It has also failed to solve. After I installed Windows 7 manually on a disc, I have successfully installed the same driver to activate the LAN, although it is listed as a Windows 8 / 8.1 driver by the manufacturer. For me, this means that the driver is valid but I somehow do not import into the Lite Touch boot image. What can I do to make the driver to load properly?

  EDIT: See http://social.technet.microsoft.com/Forums/en-US/7562dfc5-ae02-40f0-b082-645a95b8fca3/problems-with-drivers-in-lite-touch-deployment-winpe-629200-deploying-7-x64-ent?forum=mdt

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  My sony vaio SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  I have compained several times to sony, but they said that there is problem with windows 8 and this laptop model.

  I think that this response is not the solution to the problem, as it is my work that still hinder once. This laptop has with exmor HD webcam, so we expect the quality of the picture from the webcam to be strong, but it is dark, blurry, vary hard to identify someone even. It is even lower than some old VGA cam.

  Please provide a rigid solution.

  Hello krishna_18,

  The most common cause of this problem is a poorly lit room.  Please try to use the camera in well-lit areas.  Since there is no light or flash on the camera device, it is not able to work as well in dark situations.

  As to the answer before someone gave you "problem with Windows 8";  What they probably meant is that this laptop does not come with any software the camera included.  Therefore, the "Camera" app Windows 8 is what is natively provided and used.  This application is very limited in options and resolution.  Using an alternative app camera of your choice can also improve options, parameters, and results.

• How can I export images from Photos with Lightroom or Photoshop?

  How can I export images from Photos with Lightroom or Photoshop?

  Use the file ➙ export Original unmodified for Photos X menu option.

  

  

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• How can I add image 8-bit with 32-bit image in vision assistant

  Salvation;

  I want to match image 8 bits with a 32 bit image assistant vision. I have a research topic on my doctoral thesis on the treatment of the image and I found a picture on the internet like that but I couldn't solve this problem in vision assistant. I have attached to it. Corresponding to the original image and its State binarize on the same image. Please help me, how can I do?

  The proposed script was just erase the area of interest, replace seuillees with zeros pixel. To fill this area with a given color, a possible solution is to invert the mask, it allows to make a new image of the area of binarize, multiply by the chosen color (use a saturated color, otherwise you will get color variations) and add the result to the previous image.

  That's what made the attached script.

  

• OptiPlex GX620 with Analog Devices ADI 198 x integrated Audio and Windows 7

  Hello...

  I have an Optiplex GX620 with built-in Bios version A11 and 198 X Audio.  I installed Windows 7 on the system and it works fine, except for the Audio.  In recording the sound device Panel, it does not show the adaptors to THE Stereo Mix as active or.  DELL provides on issueing an updated driver after October 22, 2009?  Is there somewhere else I can look for these drivers up to date?

  Thank you.

  Analog Devices ADI 198 x integrated Audio
   
  Release date: 24/01/2007
  Version: A255.12.01.7010
  Important: recommended
  Download Type: driver
  File format: hard drive
  File size: 3MB

  R145551. EXE 32 BIT

  R145149. EXE 64-BIT

  Compatibility

  Systems OptiPlex GX280 OptiPlex GX520 OptiPlex GX620 OptiPlex SX280 Precision 370 Precision 470 Precision 670

• How can I get my screenshot image in Paint with Win7?

  I have Window 7 Home Premium with Service Pack 1.  When I use "print screen" and then open Paint, paste option is grayed out.

  The 'Paste From' option is available, but I don't know where to look for the image that I caught.  The option paste to open in my library > photos.

  Thanks for the help; It's very frustrating.

  Thought by using the Snipping Tool?

• the system image create fails with the error e/s

  error message says to run CHKDSK/r on source/target volumes.  CHKDSK found no errors.  create system image still fails with the error e/s.

  NOTE: I've been running this process for several years without problem.  This problem is placed right after the application of all the new updates/patches to the system.

  Found a solution that works...

  format receiver volume, take him and start the system.

  recharge the receiver volume, then create startup system image.

  It worked until the end without I/O error message.

• Can I place a Dell OptiPlex 755 with Intel Core 2 Duo in Windows 8 Pro to Windows Pro 8.1?

  Can I place a Dell OptiPlex 755 with Intel Core 2 Duo in Windows 8 Pro to Windows Pro 8.1? I tried several times. I wonder if my computer does not meet the requirements for upgrade. How can I?

  Hello Andrew,.

  Thanks for posting your query on the Microsoft community Forums.

  According to the description, you want to upgrade to windows 8 for windows 8.1 on your system.

  As you already use windows 8 on your system, you can try to upgrade to windows 8.1. However, there are some system requirements that are needed to run windows 8.1 correctly on your system. Please see the link below for the topic of system requirements.

  Reference:

  The system configuration required

  Outside the system requirements, you will also need the windows 8.1-compatible drivers. There is a possibility that some devices may not work if the compatible drivers for windows 8.1 are not installed on your system. Driver are manufactured by the manufacturer of the system. It seems that Dell has not made drivers for windows 8.1.

  Refer to the link checking the available drivers for your system.

  Reference:

  http://www.Dell.com/support/home/us/en/04/product-support/product/OptiPlex-755/drivers

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

  Original title: replacement disk and windows.

  Hello guys.

  I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

  I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

  Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

  The laptop I want to buy is an Asus if that helps...

  Thanks in advance...

  The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

  Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

  J W Stuart: http://www.pagestart.com