help the optimization of the descent

Similar Questions

• How can I help the Uzbek language translation of Mozilla FireFox (Web browser)?

  How can I help the Uzbek language translation of Mozilla FireFox (Web browser)?

  Hi Erkin Farxodovich,
  I thank you for volunteering, to do this please contact the l10n team. And also the location on this page Quick Start Guide: https://wiki.mozilla.org/L10n:Starting_a_localization

  That should have all the information. Please reach out to the group mail as well and they can help with questions along the way.

  I hope this helps.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Helps the KB981852 update

  helps the KB981852 update.  the following message was published in regedit: %Windir%\KB981852.log
   
  [KB981852.log]
  8.767: ================================================================================
  8.767: 2010-11-13 22:43:22.430 (local)
  8.767: c:\690c14c58cb8e8f058d1\update\update.exe (version 6.3.13.0)
  8.783: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  8.783: hotfix started with following command line:
  8,845: CheckSystem: main Version mismatch: STATUS_NT_VERSION_MISMATCH
  8,845: DoInstallation: CheckSystem failed: 0xf021
  8,845: the version of Windows you have installed does not match the update you are trying to install.
  14.602: message displayed to the user: the version of Windows you have installed does not match the update you are trying to install.
  14.602: user input: OK
  14.602: Update.exe extended error code = 0xf021
  14.602: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  I am running windows vista with Service Pack 2 installed.

  If you need more info please let me know

  The repeated failures to install KB981852 suggest very strongly that you see the effects of a rootkit infection W32/Alureon-Variant!

  Following the instructions on this site should help you:

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  ~ or ~.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/>

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx>

  For enterprise customers, support for security updates is available through your usual support contacts.

• How to help the user focus

  How to help the user focus

  Magnifier enlarges part of the screen. This is especially useful for viewing objects that are difficult to see. It is also useful for people who are generally difficult to see the screen.

• Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Hello

  Method 1: I suggest you put the computer to boot is a way to determine what's asked the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  A problem with leaks memory occurs in the Audiodg.exe process when you play audio on a computer that is running Windows 7, Windows Server 2008 R2, Windows Vista or Windows Server 2008

  http://support.Microsoft.com/kb/981013

  Important

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• In Muse miniature slideshow container, I have images where data in image properties can be set. SEO search engines see the data and help the visibility of my site?

  In Muse miniature slideshow container, I have images where I can insert the data of image properties. SEO search engines see the data and help the visibility of my site?

  Post edited by: Howard Lower and rewrote the question because I have yet to get a response.

  Yes, they will be included in the report.

  Please check these links:

  https://helpx.Adobe.com/Muse/how-to/add-alt-text-and-ToolTips.html

  https://forums.Adobe.com/thread/1747973?start=0&TSTART=0

  Thank you

  Sanjit

• Help the moderator please

  Help the moderator please delete a post...

  OK, it has now disappeared.

• Need help to optimize this script.

  Hello

  I use ID CS5 on Windows7.

  I have a requirment where I need to type text in a block of text perticular and copied it to any other text frames.

  I wrote this little script that does the job for me.

  It has a few obvious repitations and is ineffective.

  Please help me optimize it.

  myDocument var = app.activeDocument;

  myPage var = myDocument.pages.item (0);

  find a block of text with the title of specific script and store its content in a variable

  for (var i = 0; i < myPage.pageItems.length; i ++)

  {

  currItem = myPage.pageItems.item (i);

  If (currItem.label is "ParentText")

  {

  source var = currItem.contents;

  }

  }

  find all the blocks of text except the text with the title of script block and set its content to the source

  for (var i = 0; i < myPage.pageItems.length; i ++)

  {

  currItem = myPage.pageItems.item (i);

  If (currItem.label! = "ParentText")

  {

  currItem.contents = source;

  }

  }

  Hello

  You could match to your 'model' textFrame using string functions.

  Text operations are faster and there is no need of extra loops:

  var
            mLabel = "ParentText",
            mBreak = ";_;",
            mString = app.activeDocument.textFrames.everyItem().label.join(mBreak ),
            mID = mString.search(mLabel),
            mFrames = app.activeDocument.textFrames.everyItem().getElements(),
            source, k;
  
  if (mID == -1)  { alert ("Desired label not found"); exit(); }
  
  mID = mString.slice(0,mID).split(mBreak).length - 1;
  source = app.activeDocument.textFrames[mID].contents;
  
  for (k = 0; k < mFrames.length; k++)
            if (mFrames[k].label != mLabel)
                      mFrames[k].contents = source;
  

  Arrival to the string table returns a string,

  Search method returns the index

  Slice method cut the string.

  Split method trasforms it back towards the table length (minus 1) is equal to the index of the textFrame.

  The rest is to change the content of the frames inside a loop

  Jarek

• help the lack of service

  1 cannot open information system

  2. help service is missing

  3. unable to set default windows firewall

  It is quite difficult to be sure, with these clues... so let's get some clues that you don't end up chasing the wild goose.

  Now, I think I have fixed aid information system, help and support, then the XP firewall a thousand times, but could not find something in the notes with any error message that says:

  Cannot open information system
  assistance service is missing
  Cannot set default windows firewall

  I have a lot of similar things, but we need to know just what you see to provide assistance less frustrating.  It shouldn't be too difficult to fix but... with some information.

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  You have now or have you ever in the past used of third party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost, boost, gum, muncher. one click fix, new, intuitive, errors, stop crashes, stop errors, improves, saves you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, key, key, whirling arrow or screwdriver?

• Help the CBO to make the right choice

  Hello everyone. I have a related question performance. I would like to hear your opinion on this. Here's a simple query on the transactions table:

  SELECT
       *
  FROM
       transaction t
  WHERE
           t.transaction_method_type_code = 'CREDIT'
       AND t.process_date BETWEEN TO_DATE ('11-MAR-2015') AND TO_DATE ('12-MAR-2015');
  
  

  

  Oracle chooses an index based on the process_date column. I think it's good. When we increase the oracle interval follows a different route:

  SELECT
       *
  FROM
       transaction t
  WHERE
           t.transaction_method_type_code = 'CREDIT'
       AND process_date BETWEEN TO_DATE ('11-MAR-2015') AND TO_DATE ('29-MAR-2015');
  
  

  

  Which is understandable, because in this case, transaction_method_type_code is more selective. But real-time direct, we do not hardcode those dates, keep us in a table.

  SELECT
       *
  FROM
       transaction t JOIN cntrl_process_date ON process_date BETWEEN previous_process_date AND current_process_date
  WHERE
       t.transaction_method_type_code = 'CREDIT';
  
  

  

  Oracle chooses is no longer the right index finger, even if the difference between the dates of cntrl_process_date is always a day. I can still understand it because he has no idea of CBO are than the actual data. Bind picking concept is not applicable here.

  I tried to help CBO by adding a constraint on a cntrl_process_date but it did not help:

  ALTER TABLE cntrl_process_date ADD CONSTRAINT cbo_please CHECK (current_process_date - previous_process_date = 1);
  
  

  Is it possible to help CBO with good choice next to the addition of an indication?

  Thanks to you all. I appreciate your time.

  No version, so hard to give the best advice. and I think you need to get the Note 'plan_table is old version' since we do not see a sign of the section of the predicate.

  One possible strategy - from your Control Panel has a line:

  Add a primary key to the table - even if it's through a meaningless key column (holding, say, a value of 1), then change your query to:

  Select * transaction t

  where process_date between (select previous_process_date in the cntrl_process_date where primary_key = 1)

  and (select current _process_date of cntrl_process_date where primary_key = 1)

  ;

  When subqueries are subqueries in single line based on known unique (for example, the primary key) the optimizer evaluates the subquery then optimise the main request - but only in the latest versions of Oracle

  Concerning

  Jonathan Lewis

  UPDATE: just saw your version number - somehow, it became visible only after I wrote my response.  11.1 is too old.

• Helps the blade networking

  Hi all

  I currently have a Dell M1000e blade enclosure with some M710 blades with 6nics.  The switches on the back of the blade are stacked 4xM6220 switches.  After you have configured everything that I wanted to test the failover so I have disabled the internal NETWORK card ports that map to the NETWORK adapters on the blades, however when I did this VMware still saw the NPI as online when well even I loose connection to my service console if I disabled this particular port/NIC I changed the status of the link to beacon probe but this has had little effect.  Anyone know why Vmware would see the nic as online even if the port is disabled on the internal switch to which the NIC is connected/mapped to?

  If your Blade Server 6 natachasery, you can use the combinations written by Edward for more details here http://www.networkworld.com/community/node/36359 and if you want to optimize your network knowledge you suggest to read Ken post here http://kensvirtualreality.wordpress.com/2009/03/29/the-great-vswitch-debate-part-1/ which helps a lot on networking designs.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• grid below 11 GR 2 helps the installation required

  Mr President
  
  I have some problem.do don't know don't not how to solve?
  
  I need to install the Advanced installation grid infrastructure.
  Scenario and question:
  
  I have a raw(74GB) under the DSO on 192.168.1.13.but how to implement cluster is not under OCFS2, what to do (under OEL5.4)?
  
  and in another machine (with ip 192.168.1.30) I want to load 11 GR 2 grid as well as 11 GR 2 db but how would you describe the disk to ASM-ocfs2 cluster? I had an a partition/dev/sda3 as LVM with two partion mounted /ASM1 and /ASM2 empty ext3 in this machine.what do?
  
  concerning

  I guess this will help - http://blog.ronnyegner-consulting.de/2009/09/14/oracle-11g-release-2-install-guide-%e2%80%93-grid-infrastructure-installation/
  -http://husnusensoy.wordpress.com/2009/10/30/how-to-install-oracle-11g-release-2-on-oel-5-4-on-virtualbox-installing-grid-infrastructure/

  To identify storage needs for the use of Automatic Storage Management, you must determine the number of devices and the amount of free space on the drive you need. To perform this task:
  1. determine if you want to use Automatic Storage Management for Oracle database files, recovery of files or both.
  Note:
  You don't have to use the same storage mechanism for Oracle database and file recovery files. You can use a file system for one type of Automatic Storage Management and file for each other.
  If you choose to enable automatic backups and you don't have a system of shared files available, you must choose Automatic Storage Management for the storage of files recovery.
  If you plan to activate backups automated installation, then you can Automatic Storage Management as storage of file recovery mechanism by specifying a group of Automatic Storage Management disk for fast recovery area. Depending on how you choose to create a database during installation, you have the following options:
  o If you select an installation method that runs Oracle Automatic Storage Management Configuration Wizard in interactive mode, you can decide if you want to use the same disk group Automatic Storage Management for data files and recovery files, or you can choose to use groups of different record for each file type. Ideally, you should create separate Automatic Storage Management disk groups for the data files and recovery files.
  The choice is available if you are using Oracle Database Configuration Wizard after the installation to create a database.
  o If you select a type of installation that works Automatic Storage Management Assistant de Configuration Oracle silent mode or in answer file mode, then you must use the same disk group Automatic Storage Management for data files and recovery files.
  2. choose the level of redundancy of automatic storage management you want to use for each Automatic Storage Management disk group that you create.
  The level of redundancy you choose for the Automatic Storage Management disk group determines how Automatic Storage Management reflects the disk group files and determines the number of disks and the amount of disk space you need, as follows:
  o external redundancy
  This option does not Automatic Storage Management reflect the content of the disk group. Oracle recommends that you select this redundancy when the disk group contains devices, such as the RAID devices, which protect their own data or when the database does not require uninterrupted access to data.
  o Normal dismissal
  To optimize performance and reliability in a group of disks in normal redundancy, Automatic Storage Management uses two-way mirroring for three-way mirroring for the default control files and data files. In addition, you can choose the features of mirroring for individual files in a disk group. You can also use the bidirectional or not mirror mirrored.
  A normal redundancy disk group requires a minimum of two groups of failure (or two drive devices) If you use two-way mirroring. Effective space in a disk of normal redundancy group is half of the sum of the space in all of its features.
  For most installations, Oracle recommends to use normal redundancy disk groups.
  o high redundancy
  The contents of the disk group is three lanes in reverse by default. To create a disk with high redundancy group, you must specify at least three groups of failure (a minimum of 3 devices).
  Although disk groups high redundancy offer a high level of data protection, you must take into account the higher cost of additional storage devices before you decide to use this level of redundancy.
  3. determine the total amount of disk space you need for database files and recovery files.
  If an Automatic Storage Management instance is already running on the system, you can use an existing disk group to meet these needs of storage. If necessary, you can add disks to a group of existing installation drive.
  Use the following table to determine the minimum number of disks and space of minimum disc required for installation:
  The two Types of files the files number Minimum level of redundancy of records data files recovery
  External 1 GB GB 5.4 GB 3.6 1.8
  Normal 2 3.6 GB GB 7.2 10.8 GB
  High 3 5.4 GB GB 10.8 16.2 GB

  4. If necessary, identify the groups of failure for devices of Automatic Storage Management disk group.
  If you plan to use a normal or high redundancy disk group, you can further protect the database against hardware failures by combining a set of disk devices in a custom group failure. By default, each unit includes its failure. However, if two drive devices in a group of normal redundancy disks are attached to the same SCSI controller, then the disk group would become unavailable if the controller fails. The controller in this example is a single point of failure.
  To avoid failures of this type, you can use two controllers SCSI, each with two discs and define a group of failure for the drives attached to each controller. This configuration would allow the disk group to tolerate the failure of a SCSI controller.
  Note:
  If you set custom failure groups, you must specify a normal minimum of two groups of failure for redundancy disk groups and three groups failed for disk groups high redundancy.
  5. If you are sure that a suitable disk group does not exist on the system, then install or identify the drive devices appropriate to add a new disk group. Apply the following guidelines when identifying the appropriate drive devices:
  o disc devices must belong to the user who performs the installation of the grid.
  o all devices in an Automatic Storage Management disk group must be the same size and have the same performance characteristics.
  o do not specify several partitions on a single physical disk as a disk device group. Automatic Storage Management expects that each device group on a separate physical disk drive.
  o Oracle does not recommend the use of a logical volume as a device of automatic storage management, because the logical volume is able to hide the physical disk architecture that prevents Automatic Storage Management of I/O optimization across physical devices.

• Helps the slow macbook! quicklookd and kernel_task % high... Posted ETRECHECK.

  Hello, I'm not sure how to diagnose or fix myself, so I hope someone can help!

  When one looks at the Activity Monitor there are moments where kernel_task or quicklookd are 99% of the CPU.

  The fan is going crazy for these periods...

  My macbook is running abnormally slow today and there are times when the rainbow reel comes after each letter or Word as I type. Applications take much too long to open and Safari is taking forever just to load the next page.

  How can I do to speed up my mac and what is causing these processes use so much CPU?

  Also - it says on the bottom right of my activity monitor "process: 192" Wow is not much?

  Here's my report from long hours near EtreCheck... I hope someone can help! Please, I beg you!

  EtreCheck version: 3.0.2 (306)

  Report generated 2016-08-26 07:03:12

  Download EtreCheck from https://etrecheck.com

  Duration 52:24

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Hardware information: ⓘ

  MacBook Pro (13 inch, early 2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro8, 1

  1 2.3 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 522

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since the start-up time: 16 hours

  Disk information: ⓘ

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Information thunderbolt: ⓘ

  Apple Inc. Thunderbolt_bus.

  Porter: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 8 tasks of Apple

  [loading] 153 jobs Apple

  [running] Apple 56 jobs

  [killed] 21 tasks of Apple

  21 killed process lack of RAM

  Launch system demons: ⓘ

  [no charge] 45 Apple jobs

  tasks of Apple 152 [loading]

  [running] Apple 78 jobs

  [killed] 15 tasks Apple

  15 killed process lack of RAM

  Launch Agents: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-30) [Support]

  com.waltop.waltoptablet.plist [running] (2009-04-23) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-30) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-30) [Support]

  com.Adobe.fpsaud.plist [no] (2016-06-13) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-08-18) [Support]

  com.Microsoft.Office.licensing.helper.plist [loading] (2011-03-10) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2015-02-09)

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-08-18)

  com.wondershare.AnjoyTunesHelper.plist [no] (2015-08-05) [Support]

  User Login Items: ⓘ

  LoginHelper SMLoginItem (/ Applications/Go for Gmail.app/Contents/Library/LoginItems/LoginHelper.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-18) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-18)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-02) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-02) [Support]

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-18) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-05-18)

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-08-02) [Support]

  Silverlight: 5.1.50428.0 - SDK 10.6 (2016-08-25) [Support]

  JavaAppletPlugin: 15.0.1 - SDK 10.11 (2011-12-27), check the version

  User Plug-ins internet: ⓘ

  Web of Google Earth plugin: 7.1 (2013-10-07) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Destinations:

  My Passport for Mac [Local]

  Total size: 999,83 GB

  Total number of backups: 6

  An older backup: 29/03/16, 19:22

  Last backup: 11/08/16, 22:46

  Size of backup drive: Excellent

  Backup size 999,83 GB > (disk size 0 B X 3)

  Top of page process CPU: ⓘ

  5% quicklookd

  4% WindowServer

  3% syncdefaultsd

  3% kernel_task

  3% system_profiler (2)

  Top of page process of memory: ⓘ

  660 MB kernel_task

  Quicklookd 98 MB

  90 MB system_profiler (2)

  Com.apple.WebKit.WebContent (2) 37 MB

  25 MB spindump

  Virtual memory information: ⓘ

  12 MB of free RAM

  3.99 GB used RAM (176 MB cache)

  37.15 Go Swap used

  Diagnostic information: ⓘ

  August 26, 2016, 06:08:13 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-08-26-060813_[redacted].crash

  /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  August 26, 2016, 12:50:56 AM /Library/Logs/DiagnosticReports/quicklookd_2016-08-26-005056_[redacted].cpu_res ource.diag [details]

  /System/Library/frameworks/QuickLook.framework/resources/quicklookd.app/content s/MacOS/quicklookd

  August 23, 2016, 15:30:32 ~/Library/Logs/DiagnosticReports/familycircled_2016-08-23-153032_[redacted].cra sh

  /System/Library/PrivateFrameworks/FamilyCircle.Framework/versions/A/resources/f amilycircled

  August 23, 2016, ashes of /Library/Logs/DiagnosticReports/softwareupdated_2016-08-23-140200_[redacted].cr 14:02

  / System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated

  A lot of junk that you have installed on your machine.

  Get rid of the CleanMyMac and Torrent software.