Help to the "recovery of your PC must be repaired..." ' for Aspire R7'

Similar Questions

• Dell Inspiron 1545 with Windows Vista hard drive failed and I need help, get the recovery disks.

  Hi I have dell inspiron 1545 vith windows vista, when I bought it, I did not receive installation or recovery cd because it is recovery partition, but now the disk hard colapsed and I cannot start windows or access the recovery partition, so if I buy the new hard disk where can I get windows vista? I've got my activation code, thanks Andrej

  original title: where to get vista

  Hello

  Check with Support from Dell, which must sell cheap installation media since you already own windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  --------------------------------------------------------------------------------------------

  Request backup discs - you can also request disks of Vista in the comments
  https://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form

  Why my Dell system did not come with disks? - Applies to Vista and Windows 7
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=370461&l=en&s=DHS

  Restore your Computer´s software to factory settings<-- this="" is="" for="">
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&DL=false&l=en&s=DHS&docid=3E48AE3870775D64E040A68F5B2877D4&doclang=en

  Restore your Computer´s software to factory settings<-- this="" is="" for="">
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&cs=19&l=en&s=dhs&docid=3E48AE3870775D64E040A68F5B2877D4&journalid=8E538A50B8131233E040AC0A66E94135&Query=&SystemID=&ServiceTag=&contenttype=&os=&component=&lang=&doclang=&toggle=&dl=

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• Need help with the recovery of the System Satellite L300-149

  Hello

  We have a Satellite L300-149.
  Was running really slowly then wanted to reset it to factory settings.

  Doesn't the "press F12 during startup, insert the disk in" etc etc BUT have a horrible feeling that I put a disc to which belonged in fact to a different Toshiba, we used to use a U300.
  'Give' was that the manual for the U300 is now on the desktop on the Satellite :-/

  I hope that this would not be a major problem BUT the F8 key is gone now it's impossible to connect to the internet.

  I looked online and read that the L300 sometimes doesn't come with a disc that the info is kept on a separate part of the disk hard hope so I could reset it back to settings to factory again but when I click on F2 on start up and go to the option to restore it, noting happens.

  Can someone please help?

  Hello

  Forget HARD drive recovery now
  You have recovered the system using another disc and it has been removed and the HARD recovery disk image files. If this option is NOT possible!

  You reason that the L300 and all other laptop does not come with recovery discs.
  The recovery disk must be created using the recovery disk Creator called preinstalled software. But it is also NOT possible because you deleted the preinstalled system and the files that are needed for this recovery disk are no longer available!

  But if everything is working properly except the WLan FN + F8 key, then I recommend you only install the Wlan driver. I think that the key does not work because the right WLan driver is not installed.

  I think that the Satellite L300-149 supports the smart WiFi Realtek RTL8187B.
  Then install the right driver Wlan you can find here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

• Need help on the recovery Partition

  Caveat!
  This area contains your hard drive contains the hard disk to perform a system restore

  When I double click on my hard disc, it appears such intruction on my screen, may I know what is the system recovery means and how to use it?

  * Btw, I intend to reformat my netbook, however is this system recovery can help me as soon as possible restore settings and things? **

  Any help and suggestions is welcomed and appreciated, thx ~

  Hello

  The D Partition on the hard disk contains your recovered files that allows you to perform a system recovery using the hard disk instead of using your recovery DVDs.

  To use this option, close the notebook, then press the rest away to f11 as soon as you press the power button to start the Recovery Manager and begin the process of reinstalling the operating system.

  It is a destructive process, so make sure you back up all your personal files etc. before using it.

  Kind regards

  DP - K

• Need help with the recovery partition/create recovery media

  HI - first thing I did when I got my thinkpad is a clean install of w7, but then I thought about it and restored the recovery partition, conviniently located at the end of the training, in order to create a backup dvd factory. Thing is, when I click the autorun (lenovoqdrive.exe) and select 'create recovery media', I get an error stating that "program files (x 86) \lenovo\factory recovery\recovburncd.exe" is missing... obviously since the operating system partition was crushed.

  I tried RnR and looked on the software + drivers page and nothing happens as "... \lenovo\factory recovery\" when it is installed. So, where can I download the program that creates the recovery discs?

  (I know possible to restore the operating system of the *.wim file but I want to leave that as a last resort).

  Okay here's what I did to who mightve had the same question: as mentioned earlier, I have restored the partition Q with (your favorite free partition recovery tool), then booted from a usb winpe (with imagex) generated from victory aik (free).

  first I deleted (from winpe boot usb) windoze partition with diskpart and recreated the 2 partitions S & C (and Q is on the left) by hand according to 'recovery.ini' found on q. then I restored S and C 'sdrivebackup.wim' and 'cdrivebackup.wim', respectively, using imagex.exe, which is actually two one liners.

  Finally, I tried the bcd to fixation by hand according to "bcdinfo.txt", also found on Q, but that did not really work... so I just jumped into a bootable win7 USB and he rewrote the bcd by itself (I assume). the last step has been fixing the mbr by using /fixmbr and /fixboot bootrec.exe.

  ATM I started just and afaict it behaves exactly like the first start-up of the plant. see you soon

• Error 0xc0000034, your PC must be repaired, unable to start.

  Original title: 0xc0000034 error

  Hello

  I looked through almost all of the posts here about 0xc0000034 error and I can not find a solution that helps.

  I have a Samsung, computer laptop windows 8 and my screen turns blue and start with the following message:

  Your PC needs to be repaired

  The Boot Configuration data file is missing some information required.

  Leader: \BCD

  Error code: 0xc0000034

  You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the computer manufacturer.

  Press ESC for UEFI firmware settings.

  I can't find my disk and have any kind of "installation media".

  I was wondering, is it possible to download all kinds of repair fix on another laptop on my Virgin USB key and plug it into my laptop that has this problem in order to fix it?

  Hello

  Please write us with the following details.

  1. Windows 8 was preinstalled on your computer when you bought the computer?

  2. What is the model of your Samsung computer?

  3. Have what measures you tried to get the fixed number?

  As directed by the error that provided, it seems that you are unable to boot to desktop on your computer from Samsung. You might face this problem during the important file system which makes the boot operating system is damaged or is missing. In this case, you will need to contact your computer manufacturer to get an installation disc, and then proceed further with the steps given below to make the Startup Repair.

  1. To start your computer, wait for the logo of the manufacturer to check the option of start menu, it will usually F12.

  2. The start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.

  3. Restart the computer, when you see the logo of the manufacturer, continue pressing the Boot option menu key to enter the boot menu and change the option to boot to DVD ROM.

  4. After you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  5. Select the type of keyboard and good time.

  6. Click repair your computer in the lower left corner

  7. Click Troubleshooting, Advanced option and then click start repair.

  You can contact Samsung at the link below. Click on the link, then select laptops section of office to get the correct support forums.

  Support

  http://www.Samsung.com/us/support/

  Let us know the status of the issue. We will help you.

• Can I use the recovery discs HP on a new SSD for HP Envy Windows 8?

  Hello

  I've owned my TouchSmart from HP ENVY 15 - j105sa Notebook PC, Ref. F5D08EA for a few months now and I would like to upgrade to an SSD Samsung Evo 840 (500 GB) HARD drive.
  
  I use the recovery disks that I created when I got the laptop to install the OS on the new SSD? I know that I could do it with previous versions of Windows, but with secureboot etc I do not know if this can be done with Windows 8, I know, it can be disabled in the BIOS, but I have the latest bios update for my laptop that I check regularly.

  Thanks for any help.

  The method the most painless way to do is to buy the new SSD as a migration kit.

  Migration kits are delivered with a USB to SATA data\power connector and cloning software.

  Recovery and recovery usb media discs games requires that the target disk is the same size or larger than the original. In using the method of migration (cloning) will show that a problem.

  It makes you, thank you.

• model 550-223w: cannot download the recovery media after upgrade Windows 8.1 for Windows 10

  Buy computer with 8.1 Windows preinstalled on July 9, 2015.   Downloaded disc recovery media for Windows 8.1. Elected to download Windows 10 and even installed on July 30, 2015.  Attempted to download the recovery media for Windows 10 but refused because 1 only one download is allowed.  How can I get the computer to download Windows 10?

  For some reason any warranty start date is also may 5, 2015 instead of the date that I registered the computer with HP.  How can I change the start date?

  See the link below

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• Help on the ORA-01841: (full) year must be between-4713 and 9999 and not

  While in the console f? p = 4050 connected in internal/admin in Home-> manage workspaces-> manage developers and users
  Download "ORA-01841: (full) year must be between-4713 and 9999 and not 0" when you try to change a user.
  Unable to reset the password or modify an admin user.
  This just started 2 weeks ago.
  
  
  Using Application Express 4.0.2.00.06.
  
  Someone has seen this.

  I heard of a problem due to a problem with the PASSWORD_LIFE_TIME. Worth giving a try:

  Solution
  The apex_admin app, navigate to home > Service Management > security then enter integer values for:

  -Lifetime account password (days) - enter 11688, for example
  -Apply the changes.

• Need help of the correct SAS 2.5 upgrade option "HDD for PowerEdge T620

  I want to add the disk to an existing Dell PowerEdge T620 (service tag GTPKDV1) storage. The vehicle currently has 7 300 GB SAS 2.5 "hot, two virtual drives (300 GB RAID1) and RAID5 1116 GB replaceable drives. There are 16 bays.

  Browsing the Dell store for server upgrade parts I am surprised not to see that two form factors for of 2.5 "10K rpm SAS drives. only 300 or 900 GB. Nothing to do with higher speeds or more capacity! And I'm not even sure, one of the search results is really 2.5 "because the Web site product description does not indicate the size at all.

  300 GB of the manufacturer: 15NM6 | Dell reference: 342-2016 (accessories.dell.com/.../productdetail.aspx

  900 GB of the manufacturer: TPMWF | Dell reference: 342-4143 (http://accessories.dell.com/sna/products/Hard_Drives_Storage/productdetail.aspx?c=ca&l=en&s=bsd&cs=cabsdt1&sku=342-4143&mfgpid=225343)

  The 900 GB is described as a hybrid drive. What is a drive hybrid? Isn't SAS, SAS?

  There are several results that seem to be variations on the 300 GB 10 K 2.5 "disk SAS6. They are all the same product? Why the different reference numbers?

  The H710p wouldn't even try to use the 300 to rebuild the 1.8 TB drive failure, as the reader will not be perceived as a Hot Spare for this virtual disk. A 300 GB global Hot Spare would be able to rebuild any 300 GB or more small disc. If the Global Hot Spare is a 1.8 to it should rebuild one of these virtual drives.

• 15 - g013cl: trying to recover a laptop using the recovery of 10 USB windows

  Hello

  My computer son had a virus that can not be deleted, so we saved all of his records and built a 10-recovery windows drive.  I ran it on his computer after he erased the inet 10 failed windows hard disk.  I thought it was a generic load (and yes I check the box when you create the recovery disk to add all files in windows).  It is a place where I can download a factory image?

  Or help with the recovery process. . I have the newspaper eerror of load that I can share

  The f

  JeffKralik

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about your problems of recovery and wanted to help.

  HP recovery media is not available for download, instead, you must order the physical support of HP.

  We need the number of detailed PC product to see if these media are available.

  However, if this PC has been upgraded to Win10 a previous OS, the media would restore it to the original operating system, and not to Win10.

  Also, with a PC updated, if all you want to restore to Win10, you can create a Win10 installation media go to this link and do a clean install: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT.  If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Re: How to get Corel WinDVD without using the recovery disk?

  The update for Corel WinDVD was rather messy and because of this some owners laptop uninstalled to try to install the new software. Now, we ended up with the only possibility of an image recovery, which, in practice, means losing the software.

  Updates for the Bluetooth and wifi are also pretty messy.
  Is isn´t possible to get this software back without using the recovery disk?

  As you probably know recovery image installed on Toshiba laptops is a kind of software that includes the operating system, drivers, tools specific to Toshiba and utilities but also some additional software like antivirus or DVD player application.

  All drivers and Toshiba tools and utilities are available on the Toshiba download page, and if you want to install the version of the OS, you can download each of them.
  This additional software is not available for download. It's a kind of gift on the owner of the laptop because as the new owner, your machine must be ready to employment with full protection and opportunities to use multimedia content.

  If you don't like it, you can remove the system and use your own applications.

  Summary: this software cannot be downloaded separately and if you want to have it again, you must install original image of recovery designed for your machine.

  If you have any other questions do not hesitate to ask.

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Qosmio G20: Additional programs are placed on the recovery CD?

  Hello

  I am relatively new to all this if my question is perhaps a bit noobish. But I would like to reinstall windows xp mce on my Qosmio G20. And I know that's what I use the product recovery disc for. But a few things written about it has started to get worried, so if you could answer the following questions I would be very grateful.

  (1) on the product recovery disc it is said that the additional software (ex: DVD player...) cannot be recovered from the dvd. But all these were preinstalled on my computer and I don't have a cd/dvd extra. So the question is: is this a denial of responsibility (unfairly put) and this Qosmio G20 recovery disc has all programs pre-installed so?

  (2) when I start the recovery process he formats just my drive C: or D: drive as well. I have not changed anything since I was the computer. So drive C: is where programs are, D: drive is just for some multimedia stuff.

  Thank you very much. : D

  Hello

  AFAIK Qosmio G20 comes with two recovery media:
  1 QOSMIO recovery media player
  This CD contains QOSMIO player only and use it before you install the operating system.
  2 OS Recovery DVD
  This DVD contains the operating system and all the necessary drivers, tools and utilities.
  When you use the laptop will have to new factory settings. As after the first start.

  When you use recovery DVD to install OS again, there is an option to install the operating system already persistent partition. I put t know if the recovery on your Qosmio DVDs old ghost image or new software Reco.

  Please try to boot from recovery media and let me know how it starts. I can help you to install the OS on the right track.