Help urgent please! Hola no to open jpg como y psd en indesign

Similar Questions

• request for help urgently please

  Hi to all, I have a problem with my seagate drive, that I connect with my computer and work for a time its does not appear on my computer and I have important data to the interrieur of the time I can't work well. I try to confront CELA since the computer but nothing. If anyone can help me it would me happy because my job depends on it please.

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• Pavilion 15-e072ae drivers for laptop - HELP URGENT PLEASE!

  Hello

  My mother has recently bought a computer laptop 15-e072ae HP with windows 8, windows 8 is rubbish without a touch screen so I said I would put windows 7 on, I did this and all the beautiful outside I need drivers card mother especially for the universal serial bus in no USB ports work. I spent hours trying to find these drivers without success.

  Can someone please link me to the MB drivers, I was on the download page for the driver for the laptop and you have downloaded all the other drivers, it's fair MB that I need.

  Appreciate any help thanks

  Hello:

  You must download and install the driver from chipset AMD from the link below.  The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Now, your specific model, USB drivers cannot install by running the file, so you'll have to do a bit of work.

  Read this thread below and try my steps first and if they do not work, try method posted by NAP_CHL_IT.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-HP-M6-k010dx-for-ACPI-HPQ6007-on-Windows-7/m-p/2891907#M145254

  Another thing that I was informed yesterday by another Member of the forum.

  It is not which of the two manual steps he used in the thread I posted, but he said that the drivers installed until after you restart and repeat the process a second time on its model (a different than yours).

• BlackBerry Smartphones help Urgent please

  I have a BB Torch 9800 OS V.6.0 which I was happy with since he in 2011 but I recently downloaded the latest version of the PC software on my desktop for windos XP.

  The last indicicated of version V.7.0 I downloaded and connected my torch to the PC with the cable of data required.

  Since then, my phone has crashed once the software update has been installed and now I am unable to use the phone for any other purpose other than to make a simple phone call. MyBattery does not last a few hours and the hourglass keeps popping up that is more fustrationg.

  Virgin Media have gently tried to help me with all the resets, destruction etc and no success at all. I am so disappointed by the loss of my Mobile I never want too be an another BB again.

  It's my last chance to redeem any sort of satisfaction to recover my phone tORCH 9800.

  Help

  Decommissioning of the BONE...

  __________________________________________________________________________________________

  Hello

  the best way to level or decommissioning is google your model BB

  and download the most recent available o/s.

  It should not be your provider, you can use the o/s of any carrier you like.

  -install the DM and the operating systems on your PC

  -Download BBsak and install on your PC

  -backup your BB twice using DM, in case one of them is corrupted.

  -Start BBsak and choose 'Clear the unit', wait until you get the error 507

  -go to my computer - local disk C - program files - common files - Research In Motion-

  Apploader and delete Vendor XML

  -Double-click Loader and just install the new operating system

  -Once her fact, reboot the BB, then using DM to restore your back up

  -fact!

  VIA | icedgorilla

  http://supportforums.BlackBerry.com/T5/BlackBerry-bold/downgrading-to-OS-5/m-p/2510783#M153753

  __________________________________________________________________________________________

  Hi sharkbait1

  Regarding the decommissioning of the OS, you can try these simple steps:

  1. Locate and download the OS you want to leave here, BlackBerry software download Site

  • (Make sure you download for the same model you have)

  2. double-click on the file downloaded to install it on your PC

  3. download and install the latest version of BlackBerry desktop by BlackBerry desktop software software

  • Then using software office perform your full backup of your device.

  4. search for your C: drive for any file Vendor.xml and delete them, there may be one or two vendor.xml (on your PC, change your records option to show hidden files / folders):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  5. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Downgarde will continue then after Installation of the new OS restore your backup using BlackBerry desktop

  Software.

  _______________________________________

  As you have already downloaded the OS pack then you can skip steps # 1 and continue with the rest. But please note don't install multiple OS pack on your PC, if you have any other pack OS install in another PC so you use then uninstall it.

  VIA | prince2012

  http://supportforums.BlackBerry.com/T5/BlackBerry-bold/downgrading-to-OS-5/m-p/2510783#M153753

  __________________________________________________________________________________________

• Extended attributes are incompatible - need help urgent please!

  Hello Microsoft Forum,

  I want to keep this short, as I now have serious problems.
  I have Windows 8 Pro, with each update installed.
  I was looking through the net by chance, then the messaging with a friend.
  My friend has design a logo, which he sent via Skype in a .png format.
  When I double click on the logo, the problems started. Everything has become very slow.
  The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
  The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
  Image viewer of course could not open the music file.
  So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
  This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
  In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
  I'm the admin user and UAC is set to the last row (no notification).
  In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
  I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
  I have, however, never changed anything with my theme, the sound was enabled by default.
  Setting the sound theme "None" did nothing, just like the definition of the theme options.
  Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
  Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
  With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
  This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
  The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
  I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
  I wish I had of emergency aid, as this is my main work computer
  . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
  Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
  Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
  I really want to reinstall everything, I hope that a solution to this.
  Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
  Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
  Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
  Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
  Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
  I hope that my question is understandable
  . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
  Kind regards
  Richard

  Hi Richard,

  Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

  I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Background fill? Start@last-page?? Need help urgent please :(

  Hello
  
  Is there a code for a low padding? I have a requirement that each Plan, a signature model is square to the bottom of the page. Please help me
  
  My script looks like this.
  
  For example, I put 3 of the Plan, Plan 1 has 2 pages and map 2 and map 3 have 3 pages each.
  
  My example scenario would be that in Plan 1, signature model is displayed in the page 2 and it will appear in the lower part of page 2 to map 2 and map 3, it will appear on page 3, in both Plans and it will appear in the lower part of page 3.
  
  Hope my explanation helps.
  
  
  Thank you

  Hello

  Depending on your condition, you must use the following XML tag before the signature line in your rich TEXT XML.

  **

  and also you must follow the steps below

  (1) do not use spaces between the tags above
  (2) and you will need to use Session-Break before the tag...
  To do this, you must go the INSERT MENU in your RTF
  and choose a JUMP
  and select SESSION-BREAK, CONTINUED before the xml tag...

  Then automatically 100% you reach your condition...

  Please do what is necessary...

  Kind regards
  Subrahmanyam.

• Need help URGENT please!

  The word Hello!
  
  I need to deliver a project tomorrow and I < m experiencing a serious trouble!
  I created all the parts of my project on separate projects Director.
  but when I try to incorporate the "ALL" in a project, important parts exe files (project say partA and partB).
  
  but whene I import the partA exe file I get this error 'Having trouble readind C:/projectX/partA.exe' - 1!
  no idea please!
  

  zicco_n wrote:
  > The word Hello!
  >
  > I need to deliver a project tomorrow and I
  > I created all parts of my project on separate projects Director.
  > but when I try to incorporate the "ALL" in a project, important files exe
  > parts (project say partA and partB).
  >
  > but whene I import the partA exe file I get this error "in trouble."
  ' > readind C:/projectX/partA.exe '-1!
  > no idea please!
  >
  >
  I don't think you can import a projector in another. Your main
  options would be

  Launch of a film's Director published (exe) using the command open
  * Open a file dir as a movie in a window (MIAW)
  * Insert a dir in another directory as a linked Director movie

  Each method has its advantages and disadvantages. It is difficult to recommend one method
  without knowing more details of your program. Nevertheless, its something that
  is likely to require a fair amount of work. I think him propose
  tomorrow is going to be a challenge.

• Autoruns.exe serious problem, need help urgent please

  Hi, someone there is familiar with this software from sysinternals? Have accidentally disabled key drivers in my laptop with this software and cannot run again. Anyone know how to reverse the errors using this application? Posted full problem in the recovery and repair forum. Have had no response from sys internals forum and really need help. Thank you, Jay

  Try to reactivate the drivers tab drivers doesn't work, so did system restore. Thanks to all who responded, the problem is solved

• Problem with services shared - need help Urgent please!

  Hello Experts
  
  One of my clients has installed a new oracle instance and copied all schemas and data on the new instance.
  
  Now when they bring shared services, have lost all our supply. None of the projects are recognized by the shared serices and gets the following error message when we try to set up a user
  
  'xxxxx' is not a recognized shared services project. Please contact your administrator
  
  Is there something we can do to restore Shared Services to its original state?
  
  
  Thanks in advance.
  
  Kind regards
  
  
  Sonu
  
  Published by: 637223 on January 20, 2009 02:19

  Hello

  If all hyperion services were closed and the database has been moved then in theory you must have run the configuration utility to reconfigure the part of the database.
  This should be done for all databases that have been moved.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Someone please tell me how open/read a file on my Mac OS Pro Tour/Yosemite .asf. Please help, frustrated!

  Someone please tell me how open/read a file on my Mac OS Pro Tour/Yosemite .asf. Please help, frustrated!

  of course, it's another format darn owner, so you will need a copy of Windows media player for mac.  (or VLC) there is a way to convert, however, but I suspect it will not free

  Good luck

  John B

• Install windows xp in hp mini 210 1010NR, help me please is urgent...

  How can I install windows xp in hp mini 210 1010NR... I tried to install windows xp service pack 3, but I could not, can someone help me please its urgent thank you...

  You need to integrate the drivers Sata ( ICH7M/MDH SATA AHCI ) and burn a new cd XP with nLite.

  Here is a guide showing how to integrate and here are the drivers Sata . 7-ZIP or Universal Extractor are good out of the installer.

• I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please

  I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please :(

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Need help with the error in windows update 80244019 is urgent please

  Please I need help urgent problem error update.

  I have a Dell Inspiron 1564, running Service Pack 1 of Windows 7.   I tried several times to update windows and nothing, just appears this error: Code 80244019, tried to install the Windows update agent and pops up the same error., NetFxRepair tool and nothing, FixDotNet, and nothing.  Did a recovery to the fabric (by default) and nothing.   About 2 years ago, I disabled the update and about 2 months ago I tried to update and I forgot the error. Now I need to reinstall all my programs, in the hope that with a recovery, it will fix the error and thrust my laptop, but now is worse, because the installation of updated doesn´t work, Corel Draw X 4 doesn´t supposed error of .NET Framework, so I tried the fixdotnet and netfx repair tool, but nothing. I need to work and I have can´t I have only a portable empty with an outdated windows. Help, please!

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  or

  Cannot install updates in Windows...
  http://support.Microsoft.com/kb/2509997

• How to keep the lines of the grid appear on each document as I open them? Can someone help me please?

  I hope someone can help me please.

  Whenever I open any document it opens with a grid set although the function of the grid is not checked. It closes as soon as I use Ctrl + H or close the function in the menu, but it reappears in the following document/picture etc. I use the grid a lot but have never experienced this before. It's very frustrating! It seems to me that there is a simple solution, button to press or setting to change, but turns suddenly so it feels more like a default any.

  Thank you in advance.

  Margaret

  HI Margaret

  CTRL h is short for "hide all", controlling the band guides of ants (selection) and its grid.  You must use the individual shortcut for the grid that is Ctrl ' (apostrophe).  CTRL; Activates / deactivates the Guides.

  Or you can do everything that precedes it in the view menu

  

• Can someone help me please how to insert a digital signature? When I open a PDF file, I don't see an option to digitally sign. Thank you in advance!

  Can someone help me please how to insert a digital signature? When I open a PDF file, I don't see an option to digitally sign. Thank you in advance!

  Hello

  Please visit the following link to see how to digitally sign a PDF document.

  How to apply a digital signature in Adobe Reader (Acrobat Reader) ms

  Concerning

  Sukrit diallo