request for help urgently please

Similar Questions

• Pavilion 15-e072ae drivers for laptop - HELP URGENT PLEASE!

  Hello

  My mother has recently bought a computer laptop 15-e072ae HP with windows 8, windows 8 is rubbish without a touch screen so I said I would put windows 7 on, I did this and all the beautiful outside I need drivers card mother especially for the universal serial bus in no USB ports work. I spent hours trying to find these drivers without success.

  Can someone please link me to the MB drivers, I was on the download page for the driver for the laptop and you have downloaded all the other drivers, it's fair MB that I need.

  Appreciate any help thanks

  Hello:

  You must download and install the driver from chipset AMD from the link below.  The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Now, your specific model, USB drivers cannot install by running the file, so you'll have to do a bit of work.

  Read this thread below and try my steps first and if they do not work, try method posted by NAP_CHL_IT.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-HP-M6-k010dx-for-ACPI-HPQ6007-on-Windows-7/m-p/2891907#M145254

  Another thing that I was informed yesterday by another Member of the forum.

  It is not which of the two manual steps he used in the thread I posted, but he said that the drivers installed until after you restart and repeat the process a second time on its model (a different than yours).

• Urgent request for HELP, received a phone call from GEEKS for PC TO fix my computer, because theres a Trojan horse horse hidden on my Thru Microsoft Windows folders.

  I received a phone call from microsoft technology who wanted to go on my computer & difficulty a Trojan horse, which is on my computers (more than one computer in my house). If I don't get this fixed right away, I could lose my computers & will not work to full capascity as before the Trojan horse was built-in on my computers in the last 10 days. I was very leary about it wanted to check into that first. He said he could remember at an agreed time. So I set up to 22/05/12 at 4:30 pm p.t.. Is it a scam? This should be an international alert to all users of mircosoft for msn & email clients. They would come by phone now. SO WHAT IS GOING ON HERE? !!!

  Hello

  It's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• Re: Request for help with Tecra A10-156 (Vista backup media)

  Dear members of the Forum

  I am the owner of a laptop Toshiba Tecra A10-156. As the owners of this model will be aware, the machine is supplied with Windows Vista pre-installed. Also supplied is a recovery of Windows XP Professional disc, which, once loaded on the machine, remove everything on the hard drive, including the operating system Vista and the Vista hard disk recovery partition.

  The documentation that comes with the laptop warns the user if he wants to take the Windows XP program on the computer, it must burn a DVD of backup software vista before you load the XP image because if it loads Windows XP without doing that then he loses everything to do with VISTA on the machine.
  Unfortunately, when I bought my machine, I did exactly this error and load Windows XP without backup Vista Software. Load the XP dvd, hard drive was completely wiped out, including not only the Windows Vista installation, but also the recovery partition.

  Although windows XP is a good operating system, I would like the ability to restore my machine to the factory setting. When I asked what to do with Toshiba, they said that the only way they could help would be to sell me a backup DVD of Vista recovery which would cost me a little money. (more than thirty books).
  They also mentioned that if I could find another owner of A10 - 156 using vista would be ready, they could burn a DVD using their recovery from vista machine and then I would be able to use this DVD to do the job.

  As I know personally of all other owners Tecra A10, I am writing to make a plea to ask if some A10-156 (it takes as the exact model) owner would please that nature to let me have a copy of VISTA backup medium please. Of course, I'd be more than willing to pay a total amount of the Virgin DVD (s) and shipping costs.
  If someone is willing or able to help should I very grateful indeed and hope to hear from a fellow A10-156 owner as soon as possible.

  Yours sincerely
  Ian in the United Kingdom

  I hope someone here can help and maybe you should put your e-mail address for direct contact.

• Vista Ultimate SP1 Pro: repeated failures to install SP2 and several failures repeat to install some other upgrades second request for help)

  Hello

  I'm a professional software developer, and in the last five days I have tried in vain to upgrade my Vista Ultimate Pro (purchased in the United States two years ago) SP1 to SP2 and make that the machine is in use.

  I would like professional assistance with this question and the advice to do a "clean" installation and annihilate the four days of settings and configuration of programs and software development tools is not a satisfactory answer: I want to know why I can't do an "upgrade" install: why 'upgrade install' disabled when I launch setup.exe from the original DVD / install install Vista?

  1 SP2 will not install (from Windows Update or the downloaded standalone installer from MS) (see my previous post here):

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/d499b50d-8f67-460f-ACF3-df2ff12ecec7

  for details and for a response of S. Bodin who gave no useful tips).

  2 56! other updates appear repeatedly as needing to be installed, and then they re - install whenever I have closed the computer, and, when I re - starts, they appear as being initialized, or whatever, once again.

  3 IE8 is already installed, .NET FrameWork 3.5 + is already installed (as part of the VS 2010 beta install), but they appear in the queue of facility among the 56 other updates.

  I can honestly say I've lost a lot of time and money dealing with the problems of Vista: it's one of the reasons I have not used for more than a year: I had hoped at the time of SP2, it would be stable enough to use.

  Thank you, Bill Woodruff, dotScience

  Bill Woodruff

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  Ø you are booting from the DVD to upgrade your Vista?

  Boot to the desktop and insert the DVD to upgrade your Vista.

  You can download the service pack from the link below.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Method 1:

  Follow the instructions in the link below to restore the security settings for the default settings.

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 2:

  Follow the instructions in the link below to reset Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Follow the instructions in the link below to run the update system tool which will help you to solve the problem.

  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system

  http://support.Microsoft.com/kb/947821

  Method 4:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 5:

  Follow the instructions below to install the service pack in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. check that the safe mode option is selected (the High option of the page)

  4. press ENTER. The computer then begins to start in safe mode.

  5. install the service pack.

  Method 6:

  Analysis of auditor of file system (CFS) which will help you to solve the problem.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  Follow the instructions in the link below to run the SFC scan.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• BlackBerry Smartphones help Urgent please

  I have a BB Torch 9800 OS V.6.0 which I was happy with since he in 2011 but I recently downloaded the latest version of the PC software on my desktop for windos XP.

  The last indicicated of version V.7.0 I downloaded and connected my torch to the PC with the cable of data required.

  Since then, my phone has crashed once the software update has been installed and now I am unable to use the phone for any other purpose other than to make a simple phone call. MyBattery does not last a few hours and the hourglass keeps popping up that is more fustrationg.

  Virgin Media have gently tried to help me with all the resets, destruction etc and no success at all. I am so disappointed by the loss of my Mobile I never want too be an another BB again.

  It's my last chance to redeem any sort of satisfaction to recover my phone tORCH 9800.

  Help

  Decommissioning of the BONE...

  __________________________________________________________________________________________

  Hello

  the best way to level or decommissioning is google your model BB

  and download the most recent available o/s.

  It should not be your provider, you can use the o/s of any carrier you like.

  -install the DM and the operating systems on your PC

  -Download BBsak and install on your PC

  -backup your BB twice using DM, in case one of them is corrupted.

  -Start BBsak and choose 'Clear the unit', wait until you get the error 507

  -go to my computer - local disk C - program files - common files - Research In Motion-

  Apploader and delete Vendor XML

  -Double-click Loader and just install the new operating system

  -Once her fact, reboot the BB, then using DM to restore your back up

  -fact!

  VIA | icedgorilla

  http://supportforums.BlackBerry.com/T5/BlackBerry-bold/downgrading-to-OS-5/m-p/2510783#M153753

  __________________________________________________________________________________________

  Hi sharkbait1

  Regarding the decommissioning of the OS, you can try these simple steps:

  1. Locate and download the OS you want to leave here, BlackBerry software download Site

  • (Make sure you download for the same model you have)

  2. double-click on the file downloaded to install it on your PC

  3. download and install the latest version of BlackBerry desktop by BlackBerry desktop software software

  • Then using software office perform your full backup of your device.

  4. search for your C: drive for any file Vendor.xml and delete them, there may be one or two vendor.xml (on your PC, change your records option to show hidden files / folders):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  5. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Downgarde will continue then after Installation of the new OS restore your backup using BlackBerry desktop

  Software.

  _______________________________________

  As you have already downloaded the OS pack then you can skip steps # 1 and continue with the rest. But please note don't install multiple OS pack on your PC, if you have any other pack OS install in another PC so you use then uninstall it.

  VIA | prince2012

  http://supportforums.BlackBerry.com/T5/BlackBerry-bold/downgrading-to-OS-5/m-p/2510783#M153753

  __________________________________________________________________________________________

• Background fill? Start@last-page?? Need help urgent please :(

  Hello
  
  Is there a code for a low padding? I have a requirement that each Plan, a signature model is square to the bottom of the page. Please help me
  
  My script looks like this.
  
  For example, I put 3 of the Plan, Plan 1 has 2 pages and map 2 and map 3 have 3 pages each.
  
  My example scenario would be that in Plan 1, signature model is displayed in the page 2 and it will appear in the lower part of page 2 to map 2 and map 3, it will appear on page 3, in both Plans and it will appear in the lower part of page 3.
  
  Hope my explanation helps.
  
  
  Thank you

  Hello

  Depending on your condition, you must use the following XML tag before the signature line in your rich TEXT XML.

  **

  and also you must follow the steps below

  (1) do not use spaces between the tags above
  (2) and you will need to use Session-Break before the tag...
  To do this, you must go the INSERT MENU in your RTF
  and choose a JUMP
  and select SESSION-BREAK, CONTINUED before the xml tag...

  Then automatically 100% you reach your condition...

  Please do what is necessary...

  Kind regards
  Subrahmanyam.

• Issues Mac OS 'request for help.

  Hello

  Is it possible to change the native Mac OS 'help request' from a modal window from a normal application that support the ALT - TAB?

  Is there a way to change the font size?

  Thank you

  I don't believe it.

• Request for help from SkyDrive

  original title: stydrive

  E-mail address is removed from the privacy *.

  Please provide more details so that we can help you.

  If you are using Windows Live SkyDrive access problems please join Windows Live Help link below:
  Windows Live Solution Center - SkyDrive

• Request for help to convert a LV5.1.1 .dll file so that I can open it in LV8.6

  I try to open this .dll (for copying and pasting from the Clipboard) I found on discussion forums. However, it is recorded as LV5.1.1 and I installed 8.6. Could someone open and convert these files for me please?

  Thank you in advance.

  Here is converted to 8.0.

• request for help with drivers

  Dear support team,

  I ask you to help you find the drivers.

  Hardware for generic Bluetooth adapter ID:

  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Hardware ID device Base system:

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Thank you.

  Hello:

  Go to the page of the driver and support for your laptop, download and install the following drivers:

  Generic adapter Bluetooth = Driver Atheros Bluetooth or use the one from the link below.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_94298_1

  = JMicron card reader Driver base system device, or use the one in the link below.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_115195_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Extended attributes are incompatible - need help urgent please!

  Hello Microsoft Forum,

  I want to keep this short, as I now have serious problems.
  I have Windows 8 Pro, with each update installed.
  I was looking through the net by chance, then the messaging with a friend.
  My friend has design a logo, which he sent via Skype in a .png format.
  When I double click on the logo, the problems started. Everything has become very slow.
  The image does not open and only after 5 minutes of waiting Windows Picture Viewer began to appear.
  The strange thing is, open Windows image viewer my file .wav file music stored elsewhere, not on my desk (the photo was about all this on my desk).
  Image viewer of course could not open the music file.
  So I decided to open the Task Manager, but the error described in the title, "Taskmgr.exe - extended attributes are incompatible" error came, does not let me to open the Manager.
  This also occurs with most of my programs. I get the same error with Regedit, MSconfig and other configuration utilities, and also some programs starts, as Mumble (Murmur Server can, however).
  In fact, all system tools and, more generally, all in need of Admin privilege does not work. Some of these programs give the error message, some simply do nothing at all.
  I'm the admin user and UAC is set to the last row (no notification).
  In safe mode, everything is normal. In addition, disabling antivirus (ESET Smart Security 6) does not solve the problem.
  I followed a few articles I found, which describes the fix from my sound theme on None or default Windows Setup.
  I have, however, never changed anything with my theme, the sound was enabled by default.
  Setting the sound theme "None" did nothing, just like the definition of the theme options.
  Opening to the top of anything with sound (once again a left-click on the icon in the taskbar to bring up the small volume) literally takes ages.
  Right click on the sound opening in the bar of tasks and sounds to change the theme, then takes forever.
  With forever, I hear, I see the labels and buttons to come with 5 second delay between each.
  This is a high end machine with an i7 - 3770K and a Corsair SSD ForceGS, 16 GB @ 1600 MHz RAM and a GPU GTX 670, so normally everything happens at the moment.
  The sound is the only part affected the slow opening of Chrome, Explorer, and some programs that do not work, are at the moment.
  I'm now writing this getting messages of "program does not" and "Incident at sending information" certain programs, in fact utility built into Windows.
  I wish I had of emergency aid, as this is my main work computer
  . I'm missing a few hours of serious work because of this bug, which was published in a 'stable' of Windows version.
  Edit 1: I forgot to mention that I already tried cmd as Admin ' sfc/scannow' option in Mode safe mode (with or without network, cmd does nothing when open as Administrator without mode safe, does not yet show upward) and in the Advanced Restart public services
  Edit 2: I have not installed new hardware or software when this happened in the same State as everything worked.
  I really want to reinstall everything, I hope that a solution to this.
  Edit 3: One of the programs, which frequently closed (I received a message '(program) stopped working' him) is the host of Console window.
  Edit 4: I have disabled all the codecs to start in safe mode, nothing has changed (an article describes install codecs Audacity caused the same problem).
  Edit 5: Now after a second attempt in SafeMode as administrator cmd, command "sfc/scannow" reported an error that the problems have been found, but could not be repaired.
  Edit 6: I also tried (Cmd as administrator in safe mode with network) repair DISM, could not complete because of an error.
  Edit 7: Tomorrow, if I can not find a solution, I'm going to take drastic measures, like restoring to a previous safe point, using the options of recovery and if necessary, even refresh/powerwash/reinstall everything. However, I hope that these measures are not necessary, because they require a lot of time.
  I hope that my question is understandable
  . Excuse me for my arrogant desire to answer, I normally invite people in the forums, but this made my computer unusable work, resulting in some (financial) problems.
  Kind regards
  Richard

  Hi Richard,

  Since the problem started happening when you tried to open the image file that has been sent to you on Skype. There might be a chance that the image file would be infected by the virus, due to which your computer is facing this problem.

  I suggest to run the Microsoft of Networking in Safe Mode Security Scanner and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• A request for help drawing - CS3 - My Rectangle tool (and all the variants, circle, oval, etc.) are...

  Help request - CS3 - Illustrator - Rectangle drawing tool (and all the variants, circle, oval, etc.) draw rectangles of multi which are anchored to the point where the action of drawing was started and the spacing between these rectangles is compared to how fast the mouse moves while drawing and the location of each object follows the path of the mouse.

  It's an interesting drawing effect and maybe someday an end, but I did not when I turned it on or how to get rid of.

  I leave and reopened the app.

  I removed my preferences and quit and reopened the app - it's is still there.

  All the help which can be extended to a user on the fly, trying to convert would be much appreciated.

  Yes that's correct pls check your keyboard if this tilde ~ works properly or not

• Passing values, addEventListener, request for help on the MouseEvent macro Manager

  Hello
  
  I pasted the code below. I wish to have a group of images extend and shrink the mouse hovers over it (possibly smooth, not choppy as they are now, as well as the erasure of B & W to color on enlargement - but not relevant to this question).
  
  As you can see I wrote a function separate from Grow and Shrink for each image, but it is very inefficient (I'm an old hand to VBScript, but new to Actionscript).
  
  I'm looking for a way to pass the instance in question to the function so I can use a growth and a narrowing function for all the images to be used, for example (where ' 1' is the passed element and ' whichItem' is what I'm trying to do here):
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage ( 1));
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage ( 1));
  
  function growImage(event:MouseEvent,_ _whichItem_):void {}
  whichItem.x = whichItem.x - ( whichItem.width / 2);
  whichItemthere = there whichItem- ( whichItem.height / 2);
  whichItem.scaleX = 1;
  whichItem.scaleY = 1;
  }
  
  
  ... etc.
  
  When I try to pass data to the line in the line of addEventListener:
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage (1));
  
  I always get errors that tell me I'm trying to compel the mouseevent on a string and the wrong number of arguments (waiting for 2). If I put two arguments in, I get a load of errors.
  
  I'm new, confused, but very impressed with Actionscript 3.0. I only work with him for about a week now and can do a lot, but this thing in particular left me speechless.
  
  THANKS for any assistance you can render so I can get this function running. The information is probably in several places, but I don't yet know enough to be able to know where or how to look for my response. Your help is invaluable and is appreciated.
  
  Best regards
  
  Dave Xanatos
  
  
  Code snippets (less the imports, addChilds, chargers and URLRequests...):
  
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OVER, growImage1);
  galleryLoader1.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage1);
  galleryLoader2.addEventListener (MouseEvent.MOUSE_OVER, growImage2);
  galleryLoader2.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage2);
  galleryLoader3.addEventListener (MouseEvent.MOUSE_OVER, growImage3);
  galleryLoader3.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage3);
  galleryLoader4.addEventListener (MouseEvent.MOUSE_OVER, growImage4);
  galleryLoader4.addEventListener (MouseEvent.MOUSE_OUT, shrinkImage4);
  
  
  function growImage1(event:MouseEvent):void {}
  galleryLoader1.x = galleryLoader1.x - (galleryLoader1.width / 2);
  galleryLoader1.y = galleryLoader1.y - (galleryLoader1.height / 2);
  galleryLoader1.scaleX = 1;
  galleryLoader1.scaleY = 1;
  }
  
  function growImage2(event:MouseEvent):void {}
  galleryLoader2.x = galleryLoader2.x - (galleryLoader2.width / 2);
  galleryLoader2.y = galleryLoader2.y - (galleryLoader2.height / 2);
  galleryLoader2.scaleX = 1;
  galleryLoader2.scaleY = 1;
  }
  
  function growImage3(event:MouseEvent):void {}
  galleryLoader3.x = galleryLoader3.x - (galleryLoader3.width / 2);
  galleryLoader3.y = galleryLoader3.y - (galleryLoader3.height / 2);
  galleryLoader3.scaleX = 1;
  galleryLoader3.scaleY = 1;
  }
  
  function growImage4(event:MouseEvent):void {}
  galleryLoader4.x = galleryLoader4.x - (galleryLoader4.width / 2);
  galleryLoader4.y = galleryLoader4.y - (galleryLoader4.height / 2);
  galleryLoader4.scaleX = 1;
  galleryLoader4.scaleY = 1;
  }
  
  function shrinkImage1(event:MouseEvent):void {}
  galleryLoader1.x = 130;
  galleryLoader1.y = 350;
  galleryLoader1.scaleX =. 5;
  galleryLoader1.scaleY =. 5;
  }
  
  function shrinkImage2(event:MouseEvent):void {}
  galleryLoader2.x = 330;
  galleryLoader2.y = 350;
  galleryLoader2.scaleX =. 5;
  galleryLoader2.scaleY =. 5;
  }
  
  function shrinkImage3(event:MouseEvent):void {}
  galleryLoader3.x = 560;
  galleryLoader3.y = 350;
  galleryLoader3.scaleX =. 5;
  galleryLoader3.scaleY =. 5;
  }
  
  function shrinkImage4(event:MouseEvent):void {}
  galleryLoader4.x = 730;
  galleryLoader4.y = 350;
  galleryLoader4.scaleX =. 5;
  galleryLoader4.scaleY =. 5;
  }
  

  What you are looking for has its magic locked in the events. This event listener that you add to each of your instances, the callback function, automatically performs all of the bulk of the work for you. This code assumes that you have named your listed instances: galleryLoader1, galleryLoader2, etc.

  TS

• Problem with services shared - need help Urgent please!

  Hello Experts
  
  One of my clients has installed a new oracle instance and copied all schemas and data on the new instance.
  
  Now when they bring shared services, have lost all our supply. None of the projects are recognized by the shared serices and gets the following error message when we try to set up a user
  
  'xxxxx' is not a recognized shared services project. Please contact your administrator
  
  Is there something we can do to restore Shared Services to its original state?
  
  
  Thanks in advance.
  
  Kind regards
  
  
  Sonu
  
  Published by: 637223 on January 20, 2009 02:19

  Hello

  If all hyperion services were closed and the database has been moved then in theory you must have run the configuration utility to reconfigure the part of the database.
  This should be done for all databases that have been moved.

  See you soon

  John
  http://John-Goodwin.blogspot.com/