Help with a set of cut in an image/clipping mask

Similar Questions

• Need help with performance & setting in an environment of memory data storage/warehousing

  Dear all,

  Nice day.

  We had successfully migrated from a 4 node rack Exadata V2 to a quarter of 2 node rack X 4 - 2 Exadata. However, we are facing some problems with performance for a few charges while others were indeed marked a good improvement.

  1. the total memory on the BONE is 250 GB for each node (two of compute nodes for a quarter of rack).

  2. you would be grateful if someone could help me with the best equation to calculate the SGA and PGA (as well as in the distribution of the shared_pool, large_pool etc.) or automatic memory management is recommended?

  3. we run the exachk report which proposes to set up huge pages.

  4. when we tried to increase the SGA to more than 30 GB system does not do. We set however of the PGA to 85 GB.

  5. in addition, we noted that some of the queries with joins and indexes take more time.

  Any advice would be greatly appreciated.

  Best regards,

  Vikram.

  Hi Vikram,

  There is no formula on SGA and PGA, but best practices for environments OLTP is amounting to give memory (which can be up to 80% of total RAM of the server) you can do 80% gas and 20% of the PGA. Envs Data Warehouse, values are like PGA SGA and 40% to 60%, or it may be up to 50% - 50%. In addition, some disencourage docs you keep the auto memory when management database you use a big SGA (> 10).

  You use a CCR environment, you need to configure huge Pages. And if the systems are not allowing you to increase the memory, just take a glance on the semaphore settings, probably, they establish lower values. And for the poor performance queries, we need to explain the structure of the table plans, and you also analyserions if smart scan is the game.

  Kind regards.

• Need help with the set of breaking records showing

  Hi all
  
  I have a situation, as display a set of data with limits (as the end number of the cheque check number) at once, if the records in the table are in order. If there is break in the sequence, just above the check at the end number check number gets split upward according to the number of break.
  
  Example:
  
  /**********************************************************************/
  case 1:
  
  Cheque_Number Cheque_Date Cheque_Amount
  
  1 5000 15 - Sep - 2011
  2 5000 16 - Sep - 2011
  3 5000 17 - Sep - 2011
  4 5000 18 - Sep - 2011
  5 5000 19 - Sep - 2011
  6 5000 20 - Sep - 2011
  7 5000 21 - Sep - 2011
  8 5000 22 - Sep - 2011
  9 5000 23 - Sep - 2011
  10 5000 24 - Sep - 2011
  
  Result of the query should be like,
  
  Total amount recompemnse using check number from 1 to 10 is of RS. 50 000 / -.
  
  /**********************************************************************/
  
  2nd case:
  
  Cheque_Number Cheque_Date Cheque_Amount
  
  1 5000 15 - Sep - 2011
  2 5000 16 - Sep - 2011
  3 5000 17 - Sep - 2011
  4 5000 18 - Sep - 2011
  10-19 - Sep - 2011 5000
  11 5000 20 - Sep - 2011
  12 5000 21 - Sep - 2011
  52 5000 22 - Sep - 2011
  53 23 - Sep - 2011 5000
  54-24 - Sep - 2011 5000
  
  Result of the query should be like,
  
  Total amount recompemnse using check number from 1 to 4 East of 20,000 rupees.
  
  Total amount recompemnse using check number from 10 to 12 is 15 000 rupees.
  
  Total amount recompemnse using cheque number 52 to 54 East of RS. 15 000 / -.
  
  /**********************************************************************/
  
  case 1, I am able to achieve, but the second I couldn't.
  
  Please help me in this.
  
  Kind regards
  Arumugam

  SELECT bank_code, (chq_no), MAX (chq_no), MIN MIN (chq_dt), MAX (chq_dt),
  SUM (sum)
  FROM (SELECT bank_code, chq_no, chq_dt, amount,
  MAX (marker) OVER (PARTITION BY bank_code ORDER BY chq_no)
  marker
  FROM (SELECT bank_code, chq_no, chq_dt, amount,
  CASE
  WHEN ROW_NUMBER () OVER (PARTITION BY bank_code ORDER BY chq_no) =
  1
  THEN 1
  WHEN chq_no
  -LAG (chq_no) OVER (PARTITION BY bank_code ORDER BY chq_no) >
  1
  OR MONTHS_BETWEEN
  (chq_dt,
  LAG (chq_dt) OVER (PARTITION BY bank_code ORDER BY chq_no)
  ) > 1
  THEN ROW_NUMBER () OVER (PARTITION BY bank_code ORDER BY chq_no)
  END marker
  OF knm_test))
  GROUP BY bank_code, marker
  ORDER BY 1, 2

• Help with 'Invalid set error.

  I get this error:

  InvalidSetError: Series is not possible, invalid or unknown.

  Event.value:1:acroform:St.1:calculate

  It is a sample of writing level document called "initIncentBon":

  incentBon = {};
  incentBon[" "] = {};
  incentBon = {
      "1" : [-18, .25],
      "6" : [-16, .25],
      "11" : [-14, .5],
      "16" : [-12, .5]
  }
  

  There is another document level script called "incentBon":

  function incentMod(bonus)
  {
      return incentBon[bonus];
  }
  

  Trying to get the premium the first number of a field using this script:

  event.value = incentMod(this.getField("St\.0").value[0])
  

  Where "St\.0" is the field that has the number it throws to get the result. For example if I enter a 16 in the field 'St.0', I should get a result of-12.

  I hope someone can help because I'm stumped!

  For some reason, the closing brackets has not survive the copy & paste. That's what it should be:

  function returnIncenBonArray (num) {}

  If (num > = 1 & num)< 6)="">

  return [-18, 0.25];

  } Else if (num > = 6 & num)< 11)="">

  return [-16, 0.25];

  } Else if (num > = 11 & num)< 16)="">

  return [-14, 0.5];

  } Else if (num > = 16 & num)< 20)="">

  return [12, 0.5];

  } else {}

  return [0, 0];  Replace everything that is appropriate

  }

  }

• Help with 2 buttons, 2 entertainment and 2 audio clips

  Hey everybody,

  On board, I just animated in After Effects so bear with me here... I'm on a DPS project help for a friend and it left me speechless.

  I have a project to animate with 2 animations, 2 audio clips and 2 buttons. Let's call them Animation1 Audio1 and Button1. Animation2, Audio2 and Button2. I want to have the charge of the composition and wait for the user to click a button, the easy part. Now, I want to have Animation1 play with Audio1 when the user clicks Button1, but I don't want the other elements (Animation2 etc.) to play or be visible. Then vice versa when Button2 is clicked. I was able to get the elements of Button1 to work but then I still see items of Button2. The animations are sync'd to the audio files so they need to play in time with each other. I searched some tutorials on the web, but I'm probably not the right thing.

  Any help is very appreciated.

  RA

  You can bind a callback with the 'complete' event function of the audio tag and you can toggle the display property key to the function call back from events.

  IN the case of composition ready, add the code below

  {sym.$("YourAudioElementId").bind ("ended", Function ()}

  code to display the button here

  });

• Help with the looks to copy it from the clip of

  I so want to wrap your head around this program frustrating (I do so well with the rest of the suite Adobe), but I'm fighting.  It should be simple, but try as I might I can't seem to make it work.

  After building a glance on a clip with the color wheels and sliders and the primary and secondary layers and masks, etc... I just want to COPY exactly the look on the same instance of the clip in subsequent shots.  Or maybe who will overlook a different plug, but the same time otherwise.

  I don't want to use the shooting function.  I want to COPY, as you may first CS6 and now with the attributes of the dough into CC.

  I've read and seen in the tutorials a confusing function that involves the Alt keys and keypads, but I'm on a Mac of the retina that has the smaller keyboard.  And this copy feature seems limited to spaces '9 '.  What about a clip that reappears 10 slots later?

  Am I missing something?  The manual says hitting 'C' allows you to copy a grade, but then what?  There is no function "Paste."  Help!  And I thank you.

  If I can't do that, then this program is certainly not for me.

  I use the C all the time. This is copy - paste at once:

  1. Select the item you want to copy to

  2 hover your mouse over the clip you want to copy from (don't click)

  3. press on "C".

  The clip in step 1 should have now the ranking form of battery the clip in step 2.

• I need help with the debugging of a gallery of images created in flash.

  I created this gallery which is assumed that the user can click on a button last or next to goto the image of another. However, when I open the .swf sound loop. Here my script below. Could someone please provide some assistance? Thanks in advance.

  Stop();

  Next button
  next_btn.onPress = Function)
  {
  if(mc_content._currentframe==mc_content._totalframes)
  {
  mc_content.gotoAndStop (1)
  } else {}
  mc_content.nextFrame)
  }
  }

  last button
  last_btn.onPress = Function)
  {
  if(mc_content._currentframe==1)
  {
  mc_content.gotoAndStop (mc_content._totalframes)
  } else {}
  mc_content.prevFrame)
  }
  }

  Try going into your publication of Flash settings and select your version of actionscript AS2.

• Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half to separate

  Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half in separate PDF files. for example I entered that do three pdfs of 1-5, 5-7, 8-10 pages and it will result in me

  first pdf = 1-5 pages

  second pdf = 5-7 pages

  Third pdf = 8 to 10 pages.

  Y at - there no way to do it with adobe acrobat or any other software? I tried many software including adobe with extract and split option, but I did not get the results you are looking for. so please:

  I would like to know if any of you have any knowledge about it. I have

  Thnanks in advance!

  Hi minixain,

  Yes, you can do it using Adobe Acrobat application (Adobe Acrobat free trial downloadversion |) Acrobat Pro DC), please refer to this document for help KB split a PDF | Adobe Acrobat DC tutorials.

  Kind regards

  Nicos

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• Need help with iTunes duplicate Applescript.

  Hello

  I found this script that works great with iTunes automatically duplicates deleting. Something that I had wanted for a long time.

  I use Lion with the older version of ITunes, so I really need this script to work.

  It is an import script that helps me sync my music library to my home office with my nightclub iTunes library.   The only problem I have with this script is that it does not keep this last recorded double track.  I want to keep the last tracks because sometimes I replace a track with a better record of video or audio clip.  I would like to change this script to just base duplicates on the artist, Album artist, and name.   I hope that someone with apple great capabilities of script can check the script and help me adjust.  I tried to contact Randolf who created the script, but he did not.   Here is his magnificent scenario.   I'm sure that many people will find this useful.   I hope someone can help me.  I am very limited in my applescripting.

  -Ron

  _______________________________________________________________________________'

  Remove the Script duplicates ITunes

  (*

  This small script detects and removes duplicates in your iTunes library. Two tracks are considered duplicates if they share the same name of the track, the artist and the title of the album. If these 3 fields are the same, all the tracks except for one can be deleted. In addition, the game account and group entries are "merged."

  You can also use the account manager to remove duplicates in any other selection as the main library.

  You can enable or disable the registry deleted. Logging goes to the "logFile.txt" in your home folder.

  Any comment to

  Gmail.com

  *)

  property doLogging: false

  textlog property: missing value

  performance {}

  Tell application "iTunes" to the value plList library playlist 1

  hand (plList)

  end of race

  on hand (plList)

  -set up the recorder

  the value textlog makeFileLog (((chemin d'accès àle dossier de base) as String) & "logFile.txt")

  If doLogging logImportant then textlog ("start remove duplicates...")

  findDuplicates (plList)

  If doLogging logImportant then textlog ("completed the removal of duplicates...")

  end main

  on findDuplicates (plList)

  Tell application "iTunes".

  -find all artists

  the value artistList to the artist for each track of plList which the artist no lack of value

  Set actArtList to {}

  Repeat with an artistList in

  otherwise (actArtList contains (an AsString)) then copy (a string) to end of actArtList

  end repeat

  -find all the albums of a given artist

  Repeat with an actArtList in

  the value albList (album the album and each track of plList which the artist is a missing value)

  Set actAlbList to {}

  Repeat with al in albList

  If not (contains the actAlbList (al AsString)) then copy (al AsString) at the end of actAlbList

  end repeat

  -find all the titles with the artist one and al album

  Repeat with al in actAlbList

  the trList value (each track name of plList which the artist is an album is al and name no lack of value)

  Set actTrList to {}

  Repeat with tr in trList

  If not (contains the actTrList (tr AsString)) then copy (tr AsString) at the end of actTrList

  end repeat

  -manage these tracks

  Repeat with tr in actTrList

  the tracksWithThisComb value (all tracks of plList which the artist is an album is al and name is tr)

  If tracksWithThisComb > 1 then length

  My mergeTracks (tracksWithThisComb)

  Repeat with i of 2 all tracksWithThisComb

  the value of t to the point i of tracksWithThisComb

  If doLogging then

  the value of str (tr & "-" & al & "-" & a)

  Comment by TextLog ("Remove" & str)

  end if

  remove the t

  end repeat

  end if

  end repeat

  end repeat

  end repeat

  tell the end

  end findDuplicates

  on mergeTracks (possDupl)

  Tell application "iTunes".

  Set arrive in section 1 of the possDupl

  played playCount value number to arrive

  the grOfTrack group value to arrive

  "the gr value.

  the value compOfTrack compilation to arrive

  the value of comp «»

  -collect all of the information would

  Repeat with i of 2 all possDupl

  value tr to the point i of possDupl

  value played trPlCount number of tr

  If trPlCount > playCount then set playCount on trPlCount

  If (grOfTrack is equal to "") then

  the value trGroup grouping of tr

  If not (trGroup is equal to "") then the value gr trGroup

  end if

  If (compOfTrack is equal to "") then

  the value trComp compilation of tr

  otherwise (trComp is equal to "") then the comp trComp value

  end if

  end repeat

  game played count to arrive at playCount

  If (grOfTrack is equal to "") then set grouping of arrive in gr

  If (compOfTrack is equal to "") then set compilation to arrive in comp

  tell the end

  end mergeTracks

  on makeFileLog (\\server\share\file_path)

  script FileLog

  Category: "log file".

  property _linefeed: 10 characters id

  -Written records messages in a file encoded in UTF8 text

  on logMessage (the_text)

  the value of f to open for access file_path with write permission

  Try

  write (the_text & my _linefeed) f from folklore as 'class utf8 '.

  on error error_message number error_number

  Close access f

  error error_message number error_number

  try to end

  Close access f

  end logMessage

  on logImportant (the_text)

  logMessage ("*" & the_text & "*")

  end logImportant

  end of script

  end makeFileLog

  iMac, Mac OS X (10.7.3)

  < personal information under the direction of the host >

  iMac, Mac OS X (10.7.3), null

  Please... y at - there anyone out there that can help me?

  Ron

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.