Help with Agency CC 20141 and Blackmagic Mini monitor

Similar Questions

• Problem with DW CC 20141 and the BC add on

  Hi all

  I had this problem on my computers that I have Dreamweaver CC 20141 installed on both.

  I used the program for a while, but all of a sudden on open it I am unable to connect to Vancouver to download a new site and start working on it using Site/site management in the top menu.

  Instead I get redirected to a page to download the BC add on. When I connect to download it, I said I already have and not give me a link to download.

  Measures to address this are:

  1. conclusion of DW

  2. go to Creative Cloud (figure 8) and open it.

  3 make sure you sync files option is enabled

  4. download the Add on Manager.

  5. start add on Manager and make the round in circles for some time using add it manager to uninstall, and the Web page to download the app to BC to uninstall and reinstall the application.

  6. start and leave off DW while doing these steps (sorry, I couldn't work on a logical sequence of things to do in steps 5 and 6)

  7. Finally, DW CC 20141 will BC app and you will be able to connect to BC and download site you want to work on

  However once this is done, when I worked in CC DW the preview for the template I worked on had an error 404 for the model, so I couldn't split view in DW how looked at the page on the site.

  If I had to go back to Adobe Creative Cloud app and disable the synchronization of file to see how the page is in split view.

  I think that there is something wrong with DW CC 20141 and synchronization of files in the Adobe Creative Cloud application.

  Hello

  In case you still experience this issue, please try some suggestions mentioned here,

  Re: Business Catalyst Extension does not not since upgrade

• Help with shortcuts removed/dead and weird Windows Update

  OK, so some time so that I was on vacation, my om used my PC in about 5 min to do something I told him to do. And somehave, when I returned, all the buttons in the start menu under the 'Connect to' or wathever is blocked. Whenever I press them, Windows is opening an empty window. Like all empty them, no text at all. And shortcuts (those in the lower-right corner) died too, all of them.  In addition to the Windows Update, its quite weird. When I open and select 'Install updates' (because I turned off auto update), he did his thing and goes to the classic blue/green start with updated text. And stays there. Can use hours and get back, and it is screwed up and before it resets the fact again. And once again. And once again. Help!

  Kraizer,
  We need to know some info on your system.  What version of level pack Windows\service are you running?  What error codes do you receive?  Questions you have indicated, I would look for in an infection possible virus\malware.  You should take a look at this thread: Mike to get rid of malware – Microsoft answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• need help with the bios password laptop hp mini 110

  Hi, I could really use a little help with my password from the bios of a computer hp mini 110 CL 1134 of the code I get when the password is entered incorrectly is CNU9382K9F

  Hello

  Try to enter: e9lofu7so8 (3rd character is a lowercase L)

  Kind regards

  DP - K

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• Help with installation of licenses and proposed

  We are currently using esxi 5 free edition on 1 server with approximately 5 vm running on it.  They are just tested at this stage and are not production machines.  Everything went very well and we want first using computer virtual production on it but will not work them on the free version as we can failover and balancing of load with vmotion.  In addition, since there will be multiple hosts, I guess we want to vcenter server?

  I spent hours looking at all the products and the various licensing options and I cant just to quite wrap my head around what we would want / need.

  Ideally, we would like a minimum of 3 guests (probably 2 active/1 pending), but can go in the future if/when we start to add more guest vm.   It is possible in the future that we begin to implement virtual desktops and we would certainly more hosts in this situation.  We want to centrally manage all of these hosts and virtual machine running on them.  Our servers are dell r610/r710 with 2 physical processors and a minimum of 32 GB of ram.  We already have some servers and some have 2 x 6 carrots and others have 2 x 4 cores.  Most likely, we will add more ram in the future if necessary.

  If we get the version of vsphere which is limited to 3 guests, is it easy to upgrade in the future?  If one exceeds the limitation of vram 192Go is it easy to be upgraded as well past that?  Basically I'm looking for the cheapest license at this time method does not limit me in the future.  Please do not hesitate to ask any questions im just do not know what other information would be needed to provide the best configuration.

  Thank you.

  If you really need to DRS then you would just go with the Enterprise acceleration kit.  It includes 6 processors and vCenter Standard licenses.   You don't have to get the essential kit more and then upgrade.   If you buy only the Enterprise CPU licenses, you will also need to purchase a license of vCenter Server (standard or foundation - Foundation would be limited to 3 guests).

• Please help with /el capitan iPhoto and iTunes /pet died need photos please

  I'm on an iMac El Capitan 10.11.3 running. I am also running iTunes 12.3.2

  I am also running and the iPhone 6 Plus 9.2.1

  my pet has just died and I would like to put pictures on my iPhone of assorted external hardeives and rebuild an iPhoto library. I also want to access the menus of iTunes.

  Its been beyond frustratiing as Apple has really changed the display and options to iTunes, iPhoto... .the option NOT automatically open iPhoto is no longer there.

  I also can't access the menus at the top of the iTunes page as before.

  MY questions are closely linked.

  1. where and how can I access menu options in iTunes.. terms itunes is just a FULL screen (which is editable?)... impossible to find or to orient the menu in a way that is understandable?

  2. How can I keep iPhoto to open whenever I plug in my iPhone?

  What versions of my above characteristics could help me keep things simple... especially at a time of crucial as now. Thank you and all help is greatly appreciated.

  I want to especially the photos to be easy to put music on my phone... can wait, but I never had so many problems with Apple stuff as today. I realize a large number is defined by the user, but I need help.

• HP 15 - ac043tu: need help with the key feature and WiFi Drivers

  Hi team,

  I try to activate the key feature and WiFi in my new HP 15 - ac043tu laptop.

  I use Windows 7 Ultimate 32 operating system.

  I installed all the drivers available on the site Web of HP (http://support.hp.com/us-en/drivers/selfservice/HP-15-ac000-Notebook-PC-series/7771404/model/8326116... for my product.

  To activate the function key, I installed driver: HP System Event Utility - sp71716, but it doesn't seem to work.

  In Device Manager, network controller shows exclamation as shown below. I tried to install Broadcom and Realtek WLAN drivers, tried to turn on/off, uninstalled/reinstalled drivers referring to other positions, but that did not work.

  

  I also tried to install HP SoftPaq Download Manager, but it did not help. Tool does not show my product described.

  I went through a similar question posted by other members, but failed to get the solution. This question gave me hard times.

  Appreciate your help in this regard.

  Thank you

  Kishan

  Hello:

  You need these drivers wireless and bluetooth driver 64-bit file should have the 32-bit drivers too.

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

  Unfortunately, I can't help you with the next question.  The system of the event utility would be the only software I can think that would have worked.

  You can try the software HP Quick Launch, but I doubt it will work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_112835_1

• HP MINI 110-1051tu: need help with password BIOS reset for HP MINI 110-1051tu

  Dear Sir.

  I have a HP Mini 110-1051tu laptop. After an abnormal stop when I turn on my laptop it asks 'Enter CURRENT Password. After using the ESC key three times on password enter CURRENT, an error pops up on the screen of the post.

  Password check failed

  Fatal error... System stopped.

  CNU93839TR

  Help, please...

  Thanking you.

  With respect,

  Castelbajac Saha,

  [Personal information]

  My note book details:

  Model: HP Mini 110-1051tu

  S/N: [personal information]

  P/N: VJ928PA #ACJ

  Hello

  Please try (all lower case)

  e9lofufoab

  Kind regards.

• NEED HELP WITH SELECTION was GOOD AND good POWER (HP dc7900 Convertible Minitowers) MARKET

  Hello! I have a HP dc7900 in Minitour Convertible with the following specifications:

  Core 2 Quad q9400 2, 66 GHz

  nVidia GeForce GT430 1 GB

  Elpida 2x2gb RAM 800 mhz (I'll add 2 x 2 earlier so I can get 8 GB)

  Card mother HP 3032 h

  Block POWER 365 stock w.

  So I was planning to buy a Radeon HD 7770 (MSI, Palit, or Sapphire) because I have a small budget and this seems to be a good fit, but there's better food, so I was wondering if there are more good, good markets that would be able to manage my PC (with the new gpu, 8 GB of ram and a single PCIe 6-pin). I also have an MS PRO-550 Industrial, ATX in my old PC and I wanted to add, but I just discovered that it is very bad and that there actually 200w (not 550) :/ Any help would be appreciated P.S I found 'used' Corsair CMPSU-400cx and an Antec SU - 430 then how do get?

  I see that your desired card has a minimum 400W power quantity, but I recommend moving more to a 500W or 600W for handling units your other hardware too although a little extra space so you would be upgraded.

  I am very pleased with the PSU Corsair, I recently installed a CX500 in my machine, although in a smaller case, you need good cables.

  I hope this helps.

• help with windows update errors and chkdsk

  I got a message saying I needed to update my windows.  I went to windows update, the express settled.  I received a message that says that I can't install the update to windows.  This is the message I received:

  The website has encountered a problem and cannot display the page you are trying to view. Take the following steps to try to resolve the problem: Refresh the page. In Internet Explorer, delete the temporary Internet files by going to the Tools menu and then Internet Options. Close and then reopen Internet Explorer.

  Then I'm defragmenting my "C" drive and I get an error with the States: Please run chkdsk /f.  I run that, once it goes through the whole process, I will return to defragment and I STILL get the same message.  I don't know how to clear these while I am able to update and to defragment my system.

  Thank you for your help

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  See also:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

• Need help with copy/move programs and Admin files to other users of the account.

  I created 'connect users of accounts' and 'lost' the original Admin, now I know how to access certain programs and others in shift, click with the right button on connection as an administrator. but can't seem to copy or move some things into "shared folder" can someone help me please? Thanks for any help! No real computer smart right now, but im learning :)

  Hello

  You can also try to connect to the original administrator account by pressing CTRL + ALT + DELETE (all three keys twice at the same time), you will get the classic login prompt. Type the administrator user name and password. You should be able to connect.

  To activate this visible account to the Welcome screen, once logged in click on Start-> Run Type &-> Regedit-> ok.

  Navigate to HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> CurrentVersion-> Winlogon-> SpecialAccounts-> UserList

  Select the username administrator and set the value to 1-> of the close Registry Editor and restart your computer.

  I hope this helps.

• BlackBerry Z10 need help with the facebook chat and notifications

  Hey, guys.

  Since I updated to version 10.2.1.2102 of the software I was not able to receive messages from the hub of blackberry facebook chat. Before the update whenever I had my phone connected to a wireless network it was automatically getting messages facebook on the hub. Now, although I can send messages and receive messages if this contact is online, once I close the conversation hub is gone and I don't get the messages, only the "new messages of * person *" e-mail after a certain time.

  In addition, I don't get notifications about birthdays of the people. I get the "next event" x hours notification on the lock screen, if I go in the calendar I see the notification at the top of the page, but it does not sound to warn me of my birthdays from the contacts.

  Can someone help me with this two problems? Thank you!

  Fact. I needed to update the facebook app.

• Help with Apex 4.2 and 6.2 Anychart full version

  Help!

  I'm working on Apex version 4.25.00.08

  We bought and installed the full licensed version of Anychart 6.2.0

  I can resolve the path very well through the browser to the full version license (which is an alias of our DBA as ac6)

  http://server:port/AC6/SWF/AnyChart.swf

  The same with the standard oracle install (which for some reason we have a path #IMAGE_PREFIX # slightly different from the norm, but again this works very well, I see the SWF file)

  http://server:port/sma_images/Flashchart/anychart_6/SWF/OracleAnyChart.swf

  So I think I'm all set in this regard.

  But I fight to point my Apex regions full version and would be really grateful for the help.

  This day-

  I took the Anychart xml sample and used it to create a region before as an anonymous block PLSQL process called get_p19data

  Loading - before regions / once per visit (default) Page

  declare

  l_xml varchar2 (32767).

  Start

  l_xml: =.

  ' <? XML version = "1.0" encoding = "UTF-8"? >

  < anychart >

  < graphics >

  < graphic plot_type = "CategorizedHorizontal" >

  < data >

  < name of series = 'Year 2003' type = 'bar' >

  < point name = "Department stores" y = "637166" / >

  < point name = "Discounters" y = "721630" / >

  < point name = "stores specialized mens / Womens" y = "148662" / >

  < point name = 'Juvenile specialty stores' y = "78662" / >

  < point name = "all the other exits" y = "90000" / >

  < / series >

  < / data >

  < chart_settings >

  < title >

  < text > sales of ACME Corp. < / text >

  < /title >

  < axes >

  < y_axis >

  < title >

  sales < text > < / text >

  < /title >

  < / y_axis >

  < x_axis >

  < labels alignment = "External" / >

  < title >

  Retail Channel < text > < / text >

  < /title >

  < / x_axis >

  < / axis >

  < / chart_settings >

  < / chart >

  < / charts >

  < / anychart >

  ';

  : P19_DATA1: = l_xml;

  end;

  Then I created a Page called P19_DATA1 element

  his hidden, protected value NO, Source used only when the current value in session state is null, Expression of Source of Type PLSQL

  I then created a chart called TESTXML1 area, removed the series and changed to XML part custom, in the removed and replaced with - custom xml part

  & P19_DATA1.

  Presents all the works and the graph makes it absolutely perfect, so my page process seems ok and is spewing some valid XML for anychart to return.

  I saw this forum last post

  https://community.Oracle.com/thread/2468200

  I thought I could use the same process above to generate XML, but change the path of the region / swf via dynamic action.

  So I copied the Javascript code in the post on the forum and changed to suit my name of the item page etc. I tried pointing to both the standard Anychart for Apex path and the path for

  our full licensed

  So I created a second graphic region called

  TESTXML2

  and added a dynamic action called TESTSWF

  change event

  Region selection type

  No Condition on the status

  Action to execute JavaScript Code

  Fires when the outcome of the event is set to TRUE

  Fire on the loading of the page

  Code

  table = new AnyChart('#IMAGE_PREFIX#flashchart/anychart_6/swf/OracleAnyChart.swf','#IMAGE_PREFIX#/flashchart/anychart_6/swf/Preloader.swf ');

  Chart.Width = 800;

  Chart.Height = 500;

  chart.setXMLFile (' #OWNER #.) GET_DASHBOARD_XML_PRC? p_param1 = Full');

  chart.setData ($v ('P19_DATA1')); Chart.Write ('chartDiv');

  Selection Type region

  TESTXML2 region

  But nothing makes chartwise, with the normal path of the Oracle, or the full path to the license version.  I just get a blank space. There is a component in this space Anychart flash (I can right click on it etc), but no graphic is displayed.

  Any ideas what I am doing wrong?

  Alternatively, if you have another way to achieve and can point me to an example that would be great. Unfortunately I keep finding old messages that might help, but

  the examples cited to look like to no longer exist.

  Thank you very much

  Neil

  Kiran, FYI, finally got it working, using this position and another one of your very useful answers

  How do the db oracle procedure in Anychart setXMLFile?

  So, if its useful to someone else, here's what I did.

  (Keep in mind that our path to the full version of anychart is an ac6 alias that is... 6.2.0.anychart/binaries/)

  Create a blank page.

  In the attributes of the homepage in FILEUrls

  /AC6/js/AnyChart.js

  I took the Anychart xml sample and used it to create a region before as an anonymous block PLSQL process called get_p19data

  Loading - before regions / once per visit (default) Page

  declare

  l_xml varchar2 (32767).

  Start

  l_xml: =.

  '

  ';

  : P19_DATA1: = l_xml;

  end;

  Then I created a Page called P19_DATA1 element

  its value hidden, protected YES, current Source used only when value in session state is null, Expression of Source of Type PLSQL

  Then I created an HTML region called TESTXML, with the source of the region of

  Adds a dynamic action in the area called TESTSWF

  change event

  Region selection type

  No Condition on the status

  Action to execute JavaScript Code

  Fires when the outcome of the event is set to TRUE

  Fire on the loading of the page

  Code

  Table = new AnyChart ('/ ac6/swf/AnyChart.swf ',' / ac6/swf/Preloader.swf');

  Chart.Width = 800;

  Chart.Height = 500;

  Chart.setData ($v ('P19_DATA1'));

  Chart.Write ('chartDiv');

  Selection Type region

  Region TESTXML

  and she's displayed a chart using our special custom path to the full version of AnyChart

  Thanks again for your help.