Help with Audio Player

Similar Questions

• help with audio! As soon as possible!!!

  If the audio on the monitor of the program does not play but his reading in the source monitor please help? How he resided in the program monitor.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Exactly what version of the program do you have problems?

  Specify the name of the program that you use, so a moderator can move this message to the correct forum

  This Cloud forum is not for help with problems of program... program would be Photoshop Lighroom or Muse or?

• need help with flash player

  I have upgraded to windows 10 and you do not have adobe flash on my computer. I tried to download it, but I get a message that says that adobe flash player is built into windows 10 and does not need to be downloaded. How can I fix it?

  @ !

  Hi Donna,.

  Please see the link below, it should help:

  Flash Player issues. Windows 10 | Microsoft edge

  Let us know if that helps.

  Kind regards

  Bani

• Help with audio.

  There is no audio on the timeline in Premiere Pro CS6. The music video plays well before the first import. You hsve of suggestions as to what could be the problem?

  If you have waited for the sponsor to happen and still do not see a waveform (and you have removed the clip and tried to import again... and again... and again once), you have the same problem, I got last week.

  I tried to create a DVD compilation for a member of the faculty who retire and received a bunch of clips (most H.264).  About half of them came in just peachy with audio intact.  Others wouldn't matter with audio no matter what I tried (even if they have played very well in the QT interval).  Because my back was against the wall, I just exported the QTPro aiff and m. as well as video first and had on my life.

  The final draft was delivered, I spent some time trying to diagnose the problem.  As near as I can tell, there was some corruption wave in the header files that would not be imported.  Windows Movie Maker threw a fit irritate on each of them (although FPC 7 does not seem to mind).  GSpot gave a warning that I did not quite understand.

  (Just like experience), you can try resaving them in QT Pro (will not transcode, it will just rewrite the header information).  Also, see if you can import other H.264 files.  And, of course, look at this bar in line; It is very, very important!

• Help with audio slideshow

  Photoshop Elements 8.0 to create a slide show.   After the addition of audio, magazine show several times with no problem.  Then began to question to see play and audio and then audio will cancel and slide show continues.  Is gone before and exported for Premiere Elements 8.0 and audio played throughout in the review.  Exported to DVD.  Plays very well on DVD player, but when I try to play on computer, drive Windows Media audio (music) time for a while and then fires.  If I stop and close the player and open again see picks it up had stopped and appropriate music playing, but only for a while and then turns off.  Make several copies of this DVD for others to play.  Some will use a DVD player, some will use the computer.  Which ' understand.  Need help.

  Have you tried to play the DVD on another computer to see if it's your computer or DVD?

  The fact that he plays very well on your DVD player makes me think it might be something wrong with your computer.

• Need help with audio sound

  Hello, my sound has stopped working one day to the other & no idea why. When I go to my info to speaker icon it says "No Audio" and the volume control is greyed out so cannot set or click on anything that is.   Anyone would be interested to help me with this remote computer assisstance through please?  Thank you.

  Ilona

  Hello Ilona,

  Thanks for joining us out on Microsoft Community Forums.

  It seems that the sound has stopped working suddenly. We will analyze and identify the cause of the problem.

  He would be grateful if you could answer a few questions to refine the question.

  1. What is the brand and model of the computer?
  2. are you aware of changes to the computer before the show?
  3. do you receive any error messages?

  This problem normally occurs when the audio drivers are corrupt. We will perform some troubleshooting steps and try to resolve the issue.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the problem persists, you mast perform the steps described in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Get back to us if you have more queries about Windows.

• Aspire V5 - 471G just updated Windows 10 Aniversary Edition need help with Audio driver

  I have problem driver Got on my v5 - 471 g ive got everthing operational with the 8.1 except the audio driver windows driver

  Help me!! BTW my laptop has been upgraded to windows 7

  and if you can link me to a page of 10 full for the Acer Aspire V5 windows driver - 471G since the driver on the product page will that until Windows 8.1 btw my laptop has been upgraded to windows 7

  So I installed your driver http://www.realtek.com.tw/downloads/downloadsview.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...    version 7.2.8000.17

  but nothing happens now, I search on google and found this

  http://support.Lenovo.com/id/ID/downloads/ds028945 version 7.2.8000.17

  I installed it even if the dolby in the taskbar icon is not but the open control panels > hardware and sound > sound

  Click with the right button on speakers > properties > dolby goto tab > there you go the toggle

  

  now, it sounded better thanks bro for the solution. So basically, what gives you is a driver of all it need is a user interface

• Need help with Media Player (latest version)

  Well, I tore my first two CDs in Windows Media Player (11) and which went well. I have synced them (because I can't figure out how to do drag and drop) and which went well. So I started to rip CDs more and got as much as 4 when a message came and I deleted inadvertently. Then, it would show that I'm ripping, but have no songs OR album titles. I went to the media player but cannot find how to fix this problem. I'd appreciate any help to make it back to where it is rip CDs and indicating the name of the album and song names. Judy (who has been blocked by snow and not liking it)

  Are you connected to the net by tearing? The network connection is needed to get the tag data.

  Again click Extract, click on more options, then the library and retrieve additional information on the net are checked, and then click OK. I think it's the parameter that tells it to get the data from the tag on the net? It is easy to copy files to the drive with Windows Explorer. Open Windows Explorer(right click on start, then click on explore). Find your music under my documents, my music file (or something similar). Find the folder with the music inside album. Right-click on it and choose copy. Then find the folder music of the rocket in Windows Explorer. Right-click on it and choose Paste.

  Click the extract and make sure that the format is set to mp3 format. Click it again and make sure that the flow is set to 192 or 256.

• Help with Media Player

  It has to do with windows media player and another program (Vegas Pro 11) when I made the video and then finish the video will not respond. Whenever I'm trying to play, he says his does not.

  Hello

  In addition to the suggestion and the question of our MVPS, I would also like to add that if the problem only occurs when you are working with Vegas Pro 11, you can also contact support or provide us with the details so that we are able to help you the best.

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• Need help with Audio Spectrum Max Height!

  So I have an audio spectrum I want to stop when it gets to a certain height in the computer and not just go on the top and out of sight.

  I thought maybe I could do layer that covers the audio spectrum, but not the other objects in the model.

  Any help?

  Here's and example of what I mean

  https://youtu.be/yiqznDG-uE0?t=25s

  At roughly 0:27 you will see the stops of the spectrum at a certain height and go any higher.

  Snap out with a mask or a linear wipe.

  Mylenium

• help with Shockwave player reinstall

  I recently updated my system (PC, Windows 7, IE 11 update) and player shockwave had to be updated. Tried to do, but will not work. My system is 64 bit, but the IE 11 running is the 32-bit version.  Tried many ways to update, then I removed it and attempted to install new, but it still doesn't work. Help!

  BTW, it also messed with my Adobe Reader within certain programs, and I had to install a new one, which seemed to work very well.

  I have Adobe Acrobat 9 Pro installed on this laptop.

  It is essential to back up the registry before making any changes to it!  A System Restore Point will do it.

  Download, unzip, then run the registry script from https://files.acrobat.com/a/preview/630c7d1a-20ec-4dec-a935-6bb260b671a6

  There is no guarantee that this will fix your problem, but it's worth a try.

• Need help with Audio conditional

  Hello again! So from the outset in a course, after a few slides of intro, I have a slide tri to direct users to other parts of a course (autonomous learning directed manner). However, I have an audio narration that plays at the entrance to this slide (slide no audio, it plays by advanced actions). I'm trying to find a way so that once they have seen this slide once on hearing and audio first, any time that they get referred to this yard slide, they hear no audio again. How this could be done?

  What I've tried: I tried two things, first of all I created a variable called Sort_Audio. Sort_Audio would be assigned to the output of the previous slide, a value of 10. At the entrance to the slide of sort, a tip action would check if Sort_Audio is equal to 10. If this is the case, it plays audio (and clears that another variable that is not related, I just need to do two things, I combined the). I have on the output of the triage blade a tip action that resets Sort_Audio to 0 so that when a user gets referred to this yard slide, it would theoretically not featured audio. Problem is in the first place for a reason any, it will play not even audio first.

  The other thing I tried was quite similar, but instead to assign values to the slides, I tried cpInfoLastSlideViewed and he equalled in the name of the previous slide, but also do the same for cpInfoPreviousSlide. None seemed to work.

  Any help would be appreciated! Thank you!

  I have demonstrated this workflow many times (DevLearn 2012, recently on an eLearning Guild online forum).

  You use any of the Exit event.  Have a user with a value variable initial (I used 0). Create a conditional action:

  IF v_visit equals 0

  Play the audio clip

  Assign the v_visit with 1

  ON THE OTHER

  Continue

  Lilybiri

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• Help with Audio using the DD Realtek Audio Manager

  Hi all
  
  I recently bought a new computer and tried today for the first time to record audio to one of my movies.
  
  On my old computer, there is no problem, but now that I bought a gateway that has this installed Realtek HD Audio Manager, I can't save.
  
  When I click on the audio button, the guest comes telling me that he will have to establish levels of microphone.
  
  Usually when I talk, it turns green and everything is correct.
  
  Now, nothing.
  
  Is there something with this software Realtek or the passage system which does not allow me to register?
  
  Thank you
  PAM

  Hi, Pam

  I'm not sure how to put it in terms you understand fully, but I'll try.

  When the computers are made, there are certain pieces of equipment which perform the tasks we ask them. This material is provided by different manufacturers. For example, you use a computer brand Gateway, but the internal circuit and the equipment are supplied by different manufacturers. Then gateway buys components from all over the place. And in this case, the manufacturer of the audio component is called RealTek. Audio material can be hard connected directly to the motherboard or it could be a separate and external expansion card that connects to the motherboard via a slot.

  Any hardware component normally requires a component of special software called a 'pilot' to help the operating system (Windows) understand how to work with the material. The driver can also reside in a few different places. It can be supplied on a chip on the motherboard or the expansion card, or it can also exist as a file that is installed in the operating system. Or it could be a combination of the two.

  so, in this case, RealTek is the manufacturer of a specific type of audio material. Unfortunately, no version of Captivate include how to work with the material provided by the manufacturer. The really unfortunate part of all this is while Captivate has problems with it, other software happily works just dandy and won't complain a bit.

  So the answer to the part of your question, is that if you remove any aspect of your software from RealTek, kill you also probably the audio capabilities of your computer. In other words, that no sound would work under Windows or any other software. Regarding the installation of other software that would work, you would seek to eventually buy an extra sound card. Disable the RealTek hardware and install the new card and its associated drivers. And even then, there is no guarantee that it would work with Captivate or even Windows. (My son continued his tail for a literally weeks trying to make a sound card to work in an old PC)

  As you can see, taking that approach is much heavier and more involved that it would be just maybe start Windows Sound Recorder or Audacity, record your audio clip and save it. Then in Captivate, import it into the project.

  What a pain that you would have to work this way? You're talking about. But until developers can so why some material works and some does not, it is what we are facing. For what it's worth, we see a similar problem with Captivate not reliable detection and work with a Headset Microphone that connects via the USB port.

  I hope this was helpful... Rick