Help with CASE

Hello people.

FIELDS IN TABLE OF PHONE CALLS: EMP_ID, TELNO, COST, TYPE

TYPE can be GIVEN or VOICE

1 EMP_ID has more than 1 TELNO

I need a report with the following columns:

EMP_ID, TELNO, VOICE_COST, DATA_COST

I need something like:

SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE COST WHEN TYPE = DATE THEN ...... END) AS VOICE, 
SUM(CASE COST WHEN TYPE = VOICE ...... END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;

Thank you in advance.

Something like that?

SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE TYPE WHEN 'DATE' THEN COST END) AS VOICE,
SUM(CASE TYPE WHEN 'VOICE' THEN COST END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;

Or the alternative way of use CASES:

SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE WHEN TYPE = 'DATE' THEN COST END) AS VOICE,
SUM(CASE WHEN TYPE = 'VOICE' THEN COST END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;

The first use of the CASE is simple - the other can have as expressions complex enough ;-)

Tags: Database

Similar Questions

Please give me help with case #0185011655

Please give me help with case #0185011655

This is a user to user, not the Adobe support forum

Adobe contact information - http://helpx.adobe.com/contact.html

Need help with CASE When statement in a Where Clause
So I have a SQL (simplified for this forum)

Select t1.*
from table1, table2 t2 t1
where t1.field1 = t2.field1
and when t1.field2 is null then trunc (sysdate) < = trunc (t1.date1 + 17)
of another trunc (sydate) > = end of trunc (t2.date2 + t2.date3)

I end up getting an error ORA-00905: lack of keyword

I'm sure that I just got something here involved.
You can not make the comparison within the statement underlying case like this. Assuming you have appropriate data types, something like this should work
```
Select t1.*
from table1 t1, table2 t2
where t1.field1 = t2.field1
  and ((t1.field2 is null and
        trunc(sysdate) <= trunc(t1.date1 + 17)) or
       trunc(sydate) > = trunc(t2.date2 + t2.date3))
```
John

Help with the Structures of the case

I have a problem switching between the true and false cases between the structures of the case. I'm writing a VI that generates a random number between 0 and 10 once every 0.5 seconds, and then adds the numbers until the total reaches or exceeds 100. At that time, it should start to subtract the number generated at random until it reaches 0, then switch again adding etc.

I have a problem switching to the case of 'false' once the sum exceeds 100. If anyone can help with that would be great!

To make things more simple exchange the Boolean value for an enumeration with only two values you can call "Count Up" and "Count Down".

Create a second shift register to hold the enumerated value specifying whether to "Count Up" or "Count Down". Initialize the new register shift to count up, and in the case of "Count Up" in the structure of the case, increment the value of data and test to see if it is greater than 100. If this is not the case, do not change the value in the registry to shift direction. If data has exceeded the limit, change the values in the shift of direction register account to "Count Down".

In the case of 'Count Down', decrement the value of data and test a value less than 0. When the value of the data is less than the lower limit, change the values in the change of direction of the County Register to "Count Up" and you're done.

Mike...

Help with making SQL query references to column aliases in the Case statement
I need help with a sql query that I'm trying. I can go about it the wrong way, but I would be grateful if I could get any suggestions on possible solutions. This is my query:

SELECT DISTINCT spriden_pidm, spriden_id id, spriden_last_name | ',' | spriden_first_name name,

CASE
WHEN rcresar_comm_code_01 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_01
WHEN rcresar_comm_code_02 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_02
WHEN rcresar_comm_code_03 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_03
WHEN rcresar_comm_code_04 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_04
WHEN rcresar_comm_code_05 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_05
WHEN rcresar_comm_code_06 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_06
WHEN rcresar_comm_code_07 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_07
WHEN rcresar_comm_code_08 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_08
WHEN rcresar_comm_code_09 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_09
WHEN rcresar_comm_code_10 IN ('268 ', '269', ' 270') THEN rcresar_comm_code_10
END acg_elig_comm_code

CASE
WHEN acg_elig_comm_code = ' 268' THEN 'rigorous HS course. "
WHEN acg_elig_comm_code = '269' THEN ' 2 or several AP or IB"
WHEN acg_elig_comm_code = '270' THEN 'NOC as possible ".
END comm_code_description

OF spriden, rcresar, rcrapp1

WHERE (rcresar_comm_code_01 IN ('268 ', '269', ' 270')

OR rcresar_comm_code_02 ('268 ', '269', ' 270')

OR rcresar_comm_code_03 ('268 ', '269', ' 270')

OR rcresar_comm_code_04 ('268 ', '269', ' 270')

OR rcresar_comm_code_05 ('268 ', '269', ' 270')

OR rcresar_comm_code_06 ('268 ', '269', ' 270')

OR rcresar_comm_code_07 ('268 ', '269', ' 270')

OR rcresar_comm_code_08 ('268 ', '269', ' 270')

OR rcresar_comm_code_09 ('268 ', '269', ' 270')

OR rcresar_comm_code_10 ('268 ', '269', ' 270'))

Rcresar_aidy_code = & aidy_code

AND rcrapp1_aidy_code = rcresar_aidy_code

AND rcrapp1_curr_rec_ind = 'Y '.

AND rcrapp1_seq_no = rcresar_seq_no

AND spriden_pidm = rcresar_pidm

AND rcrapp1_pidm = rcresar_pidm

AND spriden_change_ind IS NULL

ORDER BY name

The second case statement is where I don't know exactly what it takes to get what I want.

Output should be like:
spriden_pidm name ID acg_elig_comm_code comm_code_description
«0000000000', ' 1111111111 ","John Doe","268", «rigorous HS race"»

If I take the second case statement it works great except that I do not have my comm_code description column. My question is how can I use my first statement value box to determine this column? I think that I need a case statement as I have, but I don't know how to reference the value of acg_elig_comm_code. Any help would be greatly appreciated. Thank you.

Published by: blackhole82 on January 20, 2009 09:20
Hello

You cannot use the alias column in the query, even where it is set (except in the ORDER BY clause).
You can set the alias in a subquery and then use it in a great query, like this:
```
WITH  sub_q  AS
(
    SELECT DISTINCT spriden_pidm,spriden_id id, spriden_last_name||', '||spriden_first_name name,
        CASE
            WHEN rcresar_comm_code_01 IN ('268','269','270') THEN rcresar_comm_code_01
            WHEN rcresar_comm_code_02 IN ('268','269','270') THEN rcresar_comm_code_02
            WHEN rcresar_comm_code_03 IN ('268','269','270') THEN rcresar_comm_code_03
            WHEN rcresar_comm_code_04 IN ('268','269','270') THEN rcresar_comm_code_04
            WHEN rcresar_comm_code_05 IN ('268','269','270') THEN rcresar_comm_code_05
            WHEN rcresar_comm_code_06 IN ('268','269','270') THEN rcresar_comm_code_06
            WHEN rcresar_comm_code_07 IN ('268','269','270') THEN rcresar_comm_code_07
            WHEN rcresar_comm_code_08 IN ('268','269','270') THEN rcresar_comm_code_08
            WHEN rcresar_comm_code_09 IN ('268','269','270') THEN rcresar_comm_code_09
            WHEN rcresar_comm_code_10 IN ('268','269','270') THEN rcresar_comm_code_10
        END acg_elig_comm_code   -- Originally posted with , here (error)
    FROM spriden, rcresar, rcrapp1
    WHERE (rcresar_comm_code_01 IN ('268','269','270')
            OR rcresar_comm_code_02 IN ('268','269','270')
            OR rcresar_comm_code_03 IN ('268','269','270')
            OR rcresar_comm_code_04 IN ('268','269','270')
            OR rcresar_comm_code_05 IN ('268','269','270')
            OR rcresar_comm_code_06 IN ('268','269','270')
            OR rcresar_comm_code_07 IN ('268','269','270')
            OR rcresar_comm_code_08 IN ('268','269','270')
            OR rcresar_comm_code_09 IN ('268','269','270')
            OR rcresar_comm_code_10 IN ('268','269','270'))
    AND rcresar_aidy_code = &aidy_code
    AND rcrapp1_aidy_code = rcresar_aidy_code
    AND rcrapp1_curr_rec_ind = 'Y'
    AND rcrapp1_seq_no = rcresar_seq_no
    AND spriden_pidm = rcresar_pidm
    AND rcrapp1_pidm = rcresar_pidm
    AND spriden_change_ind IS NULL
)
SELECT    sub_q.*,
          CASE
              WHEN acg_elig_comm_code = '268' THEN 'Rigorous HS course'
              WHEN acg_elig_comm_code = '269' THEN '2 or more AP or IB'
              WHEN acg_elig_comm_code = '270' THEN 'ACG possible'
          END comm_code_description
FROM      sub_q
ORDER BY  name
```
Furthermore, you might think to rearrange your table, so that you do not have 10 columns (rcresar_comm_code_01, rcresar_comm_code_02,...) that essentially do the same thing. The usual way to handle this kind of one-to-many relationship is to have all rcresar_comm_codes in a separate table, one per line, with a pointer to the table where you have them now.

Published by: Frank Kulash, January 20, 2009 11:35
Syntax error has been corrected

I'm suddenly needing help with my browser Firefox (6.0.2)

Hello
I'm suddenly needing help with my browser Firefox (6.0.2)

(OS: I use Windows XP).

When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

This problem started today, September 8, 2011 and has never happened before.

Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

I also noticed that just before I "opened" Firefox, I now get a small box indicating:

[JAVASCRIPT APPLICATION]
Handl exc in Ev: TypeError: this oRoot.enable is not a function

This never appeared before - I hope that it offers a clue has what is wrong.

The browser not be stuck in Mode safe, said by the way.

Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
(A friend sends this request in my name from their pc)

Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

Thanks in advance.

One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

See:
- https://support.Mozilla.com/kb/server+not+found
- https://support.Mozilla.com/kb/firewalls
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode

Need help with the launching track pack for forza code 4

Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

This is the help I get when the cat to an Ambassador xbox on xbox.com

Terry wrote:

Need help with the launching track pack for forza code 4

The Xbox Ambassador says:

Location of Ambassador of the community...

The Xbox Ambassador says:

Location of Ambassador of the community...

The Xbox Ambassador says:

Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]

The Xbox Ambassador says:

Hello

Terry wrote:

Hello

The Xbox Ambassador says:

Hey

Terry wrote:

just to be on the phone to xbox live support and was told to come here

The Xbox Ambassador says:

ok\

The Xbox Ambassador says:

What is your problem?

Terry wrote:

I bought the 4 for forza ansd 360 new sealed Christmas...

Terry wrote:

has got 2 codes that accompanies the game but the pack track code does not work

The Xbox Ambassador says:

Wow good

Terry wrote:

whenever I put in the code it says code redeemed

The Xbox Ambassador says:

I think the code is used. You must return to the retailer

Terry wrote:

I tried to, but since I already opened the case they will not accept

The Xbox Ambassador says:

Oh. No,

Terry wrote:

the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open

The Xbox Ambassador says:

Maybe it was auto bought?

Terry wrote:

so, how do I get another code generated track Pack if defective?

The Xbox Ambassador says:

I do not know.

Terry wrote:

bought the game new, so I get the track pack

The Xbox Ambassador says:

Oh. It's bad.

The Xbox Ambassador says:

I think that if you Exchange 1 code it will buy it

Terry wrote:

car pack code worked, starter pack did not work

The Xbox Ambassador says:

Oh.

The Xbox Ambassador says:

It's a bad

The Xbox Ambassador says:

BTW you have an evolution of the tests?

Terry wrote:

Yes, I want to? but more anxious to get a code object generated for this pack

The Xbox Ambassador says:

Hey if I help can u give me this game too?

Terry wrote:

?????????????????

Terry wrote:

So is it possible to get a code for that time?

The Xbox Ambassador says:

Hey

The Xbox Ambassador says:

Yes.

The Xbox Ambassador says:

you need to contact them

The Xbox Ambassador says:

and tell them that the code is used.

Terry wrote:

I was told to come here? where can I go to get the code?

Hi Terryg76,

· What version of the operating system is installed on the computer?

I suggest you to contact the game manufacturer for more help and information.

Need help with the error Code 80244019 Windows Update

From: Doug

I get code 80244019 whenever I try to use Windows Update. I tried to change the DWORD in regedit nothing helps... Norton has recently found and 'resolved' trojan.zlob in 128 files in the registry, 21 cases (10 of which were in system32) and 1 browser cache. Whenever I try to use IE to go to http://windowsupdate.microsoft.com I am redirected to msn.com.

Any advice or solutions would be welcome.

From: PA bear [MS MVP]

Chances are that ZLOB was not completely removed and she was accompanied by infections Vundo and SDBot variant, all protected by a rootkit infection. You are going to need specialized assistance to clean this machine,

Unexplained computer behavior may be caused by deceptive software

http://support.Microsoft.com/kb/827315

Run a check of /thorough/ for hijackware, including post your hijackthis on a proper forum log.

Verification / help with Hijackware

http://aumha.org/a/parasite.htm

http://aumha.org/a/quickfix.htm

http://aumha.NET/viewtopic.php?t=5878

http://wiki.CastleCops.com/Malware_Removal_and_Prevention:_Introduction

http://MVPs.org/winhelp2002/unwanted.htm

http://inetexplorer.MVPs.org/data/prevention.htm

http://inetexplorer.MVPs.org/tshoot.html

http://www.MVPs.org/sramesh2k/Malware_Defence.htm

http://defendingyourmachine2.blogspot.com/

http://www.elephantboycomputers.com/page2.html#Removing_Malware

When all else fails, HijackThis v2.0.2

(http://aumha.org/downloads/hijackthis.exe) is the tool to use.

It will help you to identify and remove any hijackware/spyware with

assistance of an expert. * Post your log to

http://aumha.NET/viewforum.php?f=30,

http://forums.Spybot.info/forumdisplay.php?f=22,

http://CastleCops.com/forum67.html, or other appropriate review bodies

by an expert in the field, not here.* *.

If the procedures look too complex - and there is no shame in admitting

isn't your cup of tea - take the local machine, good reputation and

independent computer repair shop (i.e., not BigBoxStoreUSA).

--

~ Robear Dyer (PA Bear)

Another response of the community of Windows Vista discussion groups

Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

Original title: help with error message... Please...!

I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003. When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation. He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

I have no idea what a product key is and don't have anything either in the type comes to connect as usual. I can't access anything to be same to reduced functionality. I can not type in a new product key because I did not. I can not contact HP - phone number does not... !!

I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening. Please can someone help with this not very IT clued-up DTP...!

Moved from Vista programs Forum.

You should have a sticker with the product key on your computer, on the bottom, or under the battery cover. I try to type this key in and see if it accepts it. If this isn't the case, you might not have an authentic version of Windows installed.

Need help with Windows Live Mail password

Microsoft support told me that the only way to get help with my last password is by e-mail or forums and I recorded many positions and got no response. I gave them all of my personal info to my email account and no response. I called in and no response. Should I give up on this account? I got it for more than three years and many court and legal emails were sent there I need. Please notify.

I guess that you have a Live account Windows that you do not manage to connect to for various reasons. Can clarify you what the case, and you can specify that you forgot your password or your user name?

If you talk about this type of Forums (below) then they are very busy, but eventually you should get a response from Microsoft. If the problem is that I'm guessing that this is so only Microsoft can fix the problem for you, posters not Microsoft, as we find in this Forum won't be able to do much for you other than to advice on a course of action to follow.

Reset your password
https://help.live.com/help.aspx?mkt=en-AU&project=liveidv1&format=B2&QueryType=keyword&query=QAF

Support e-mail for Windows Live ID.
https://support.live.com/eForm.aspx?ProductKey=WLID&CT=eformts&b56fbf12-3dcf-4c16-9E21-25f9e35ffe3d&mapquerytype=keyword&mapquery=QAF

If I remember the way Microsoft handle such problems with the "lockout", it's that they contact you by E-mail (an address that you can still access) and either reset your password or clear the problem after having proved to their satisfaction that you are the owner of the blocked account. The process is a lot easier if you have (in the setup) provided them with another email address, or installed (and remember) secret an answer to the Question.

Unfortunately, the whole process may fail and you may forever lose this account. If that were the case, you should start now to try to get duplicates of important emails from the original sender.

Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

I don't know why vista windows no longer charge, or when the files and folders disappeared

How Windows Defender is on this problem?

Follow these steps to try to solve your problems of boot.

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Data recovery:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

See you soon.

Mick Murphy - Microsoft partner

I bought a HP with Windows 10 Tower preloaded. Is there place where I can get help with installing Windows 7?

* Original title: Windows 10 disappointment

Recently, I bought a HP with Windows 10 Tower preloaded. I gave up 10. I would like to return to the Windows 7 desktop. If I buy or buy this software, I guess I have to 'wipe' 10 of my machine? Or I would just download 7 top? What I have found online are instructions for people who have updated to 10 and want to revert to an earlier version of windows. In my case, I never had an earlier version on the machine I have now. Is there place where I can get help with installing Windows 7? Online, local dealer? Thank you.

If I were you, I call HP and tell them that you do not want this computer with Win10. They are very likely still sells machines with Win7 for businesses, because most companies do not affect the Win10 with a 10 foot barge pole.

Dell is selling them for sure. I've been helping my clients by computers Dell Win7 for a very long time now and just had one on my desk a week ago. Look at the range of Dell Vostro of computers.

The trick is to approach Dell as a businessman, and not as a normal consumer.

Need help with a WHEA_UNCORRECTABLE_ERROR

I would like to help with this error blue screen that I started having recently (started do yesterday or the 3rd if you want) and I get when I'm gaming.

I looked everywhere to try to solve this problem, but nothing helped and some would like to help. I checked to see if my CPU and GPU are overlock and I don't think I can be overclocked. In any case, I'll include a link to the minidumps for tech savvy people can help me with this.

Minidumps: http://1drv.ms/1wIEzHs

They are called BCC124 and are related to the material. Read how to diagnose and, hopefully, to correct in this wiki

BlackBerry Smartphones BlackBerry Mini keyboard with case Convertible UK

Anyoine know when the official BlackBerry Mini keyboard with case Convertible, will be available to buy online UK or even Amazon UK?

Thanks for any help.

Sorted

Need help with screen Blus of death (BSOD) on my computer toshiba laptop

Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

If someone could point me in the direction of a few possible ways to get this problem.

guys do you propose I make to the store and see if they can check it out, what would I need if I did.

I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

-leoknighted

PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

Hello

I suggest you to refer to this article to check if this help.

Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7. However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

Let us know if you need help with this question, we will be happy to offer you our help.

Help with CASE

Similar Questions

Maybe you are looking for