Help with error code 80072EFE
I tried several fixes for Windows Update to work, but I still get the error 80072EFE code. Windows suggested going to a program called "Fixit", but when I click on it, another window pops up saying that windows cannot connect to this site. I'm not an expert, but would classify me as pretty good for solving problems, but this one left me speechless. I have not installed anything back to my computer. The last time that I could do a update 12/15/10. Help!
ERROR_INTERNET_CONNECTION_ABORTED 0X80072EFE
What is the result of a security/antivirus installed (SS); It's current subscription; its definitions are up to date; has whatever it is detected the last time that the system has been analyzed for the presence of malware?
Were there updates/updates recently installed for the installed AV/SS?
Another aspect that may be at play here is the home network. The networked system via a wireless or wired router connection?
This specific error may be temporary or, as has been the case in the course of the 4 or 5 months indicated by messages on this forum, it's a sign that malware prevents the system to connect to the update servers.
The system is having trouble connecting with all the addresses of Microsoft.com?
Suggest you see if the system can access the malware scanners online, such as these-
ESET Online Scanner
Windows Live OneCare for Windows Vista and Windows 7 security scanner (requires Internet Explorer 32-bit)
Emsisoft Web Malware Scan
MowGreen
Expert in Windows IT Pro - consumer safety
* - 343-* FDNY
NEVER FORGOTTEN
Tags: Windows
Similar Questions
-
When I try to download the update of windows, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE, Please HELP
Hello
1. are you able to install some other updates?
I suggest you try the steps from the link below and check if it helps.
Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941
Hope this information is useful.
-
Help with error code 80073712 with windows update...
I have problems with fixing error code: code 80073712 in my windows update program... I tried to do the checksur.exe... and after having told me he found 10 errors... He only corrected a mistake and said its missing files to correct the other 9 errors it finds... I have over 3000 photos on the computer more than a ton of documents that was for my personal use and then my church congregation as well. The music I like to keep it on the hard drive and really don't want to lose to re - install windows to fix backup... would only store my documents and photos... as I tried to record my songs on a DVD that says that he accepts the mp3 files, but it didn't work... so I lost 3 DVDs, it took to keep the music... Are there other ways to solve this problem without having to save and not lose the files... I really need to keep most of them away to printing purposes and everyday... Thanks a lot for all the help that can be given.
I already tried the methods of fixing this error code 2... None of them helped or solved the problem... y at - it something else I can do...
I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...
I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...
You are missing a lot of critical security updates (especially if the updates published on 10 Nov 09 never installed).
You don't want to switch to Win7 with the computer in its current state (nor would you be able to do, I think).
Vista SP1 or SP2 installed?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?
See...
.. .you you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712":
http://support.Microsoft.com/kb/931712~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Help with error code: 80070490
I had problems with my computer for quite awhile... I noticed my computer slows down to a snails pace recently and decided to check the updates. Apparently, updates important are not to proceed with the installation or something... I am sure, that's the problem with my laptop... but again once I'm not very good with computers so any help is appreciated... Thank you
http://support.Microsoft.com/kb/958044
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
Tips from Microsoft is to do a Vista repair install:
Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.
Note Run a repair installation will not damage files and applications that are currently installed on your computer.
To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:
- Close all applications and restart the computer.
- Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
- In the settings window, click install now.
Note If Windows does not automatically detect the DVD, follow these steps:
- Click StartCollapse this includes this image
, and then type Drive : \setup.exe in the box to start the search .
Note The Drive placeholder is the drive letter of the computer's DVD.
- In the list of programs , click Setup.exe.
- In the settings window, click install now.
- Click Start
- Click connect to get the latest updates for installation (recommended).
- Type the CD key if you are prompted to do so.
- Click Yes to accept the Microsoft software license agreement.
- On the which type of installation do you want? of the screen, click upgrade.
- When the installation is complete, restart your computer and try again to install updates.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is a good tutorial to read about a repair installation:
If you do not have a DVD of Microsoft Vista, borrow one from a friend.
Read this tutorial on how to do a repair installation:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
Mick Murphy - Microsoft partner
-
Need help with error code "WindowsUpdate_00000646".
can anyone help?
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > download them manually.
If this does not solve it:
Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Help with error Code 8024D00E! Improperly installed Windows Update?
Update for Vista 64-bit Windows does not allow me to install the updates, and it does not seek to new updates. Error code 8024D00E keeps popping up, and without WU works correctly, I can't use my Zune software. Help?
3-hours-late duplicate of http://answers.microsoft.com/thread/af5f3930-3814-48cc-bb3b-7cfcc6bc37b1
-
Need help with error code 0 x 80070424 and 0x6D9
I need help please! Spent an entire day trying to figure this even ONCE! When I try to change my windows firewall settings I get error code 0 x 80070424. I worked at it so long, I forgot when I get the error 0x6D9 code. But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all. I even checked to make sure that the downloads are enabled in my internet settings.
Any help would be GREATLY appreciated!
Hi LindaL5299,
I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right! I hope that I am sharing will help you!
Have you seen this particular thread? (if you have, my apologies.)
MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."
If this isn't the case, you can check it out.
Watch more precisely for the reply by VIJAY B.
As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!
I have summarized his answer for you here.
METHOD 1:
If you have installed, UNINSTALL McAfee Firewall;
AND
T urn WINDOWS firewall "'WE ' "
To ensure that Firewall service Windows is activated:
1. Click on: Start
2 (in the search box) type: service3. Select: services
4 right-click right on: Windows Firewall service5. Click: Stop
6 right-click AGAIN on: Windows Firewall service
7. Click: START
METHOD 2:
Online virus scanner by using the Microsoft Safety Scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxMETHOD 3:
Try to install the latest updates from Windows Updates
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updatesMETHOD 4:
Run it Microsoft FixIt! tool (in the following article to see if that helps)
Diagnose and automatically fix problems of Windows Firewall service
http://support.Microsoft.com/mats/windows_firewall_diagnostic/
*************************************************************************************************************
Keep this site in your 'Favorites', too!
WINDOWS SEVEN FORUMS An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)
*************************************************************************************************************
Hope ONE of these methods is right for you, Linda! I DO "feel your pain!
As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC! I spent many an hour (s) search on the error codes and try to find fixes. So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!
FINGERS CROSSED!
WendeeMcCee
"The he Miss Fix - It [If I can!] ". "
Empathetic to the woes to find fixes for those darn "error codes".
I hope I can help IF I can, but
I not an 'IT' pro!
-
Help with error code irql_not_less_or_equal
Windows 8 error irql_not_less_or_equal
Do not know how to read the minidump but I compressed it and here is a link
https://onedrive.live.com/redir?RESID=B78DD8520B559AB7! 204 & authkey =! AFcAakJybuCgUOM&ithint=folder%2c.zip
Thanks for any help!
Hello
This seems to be a fairly new computer still in warranty. If so be sure to contact ASUStek
Supported. As ASUS OEM is responsible for the proper functioning of these two material and
Windows. Whatever the cause, it will be them to solve.The 0 has CAUSE ntkrpamp.exe Bug_Check which is a component of Windows, which means
Another thing he has led astray. No other real help in the minidump.Bugcheck A, {0, 2, 0, 816e0522}
Probably caused by: ntkrpamp.exe (nt! KiTimerWaitTest + 2ba)
1. check with ASUStek support, their drivers and documentation online and ask in their forums
on known problems. Update the BIOS, chipset low level drivers and ask in their forums
on known problems.BiosVersion = T100TA.227
BiosReleaseDate = 27/02/2014
SystemManufacturer = ASUSTeK COMPUTER INC..
SystemProductName = T100TA
Family = T
SystemVersion = 1.0
SystemSKU = ASUS-TabletSKU
BaseBoardManufacturer = ASUSTeK COMPUTER INC..
BaseBoardProduct = T100TA
BaseBoardVersion = 1.0
2 carefully check for malware.3 check memory very carefully (see memory test methods below).
4 use the other methods below to solve the problems.
5 after using ALL methods if necessary run Driver Verifier to see if it can indicate a
CAUSE (see methods of auditor of drivers below).========================================================
Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate these methods Windows 8/8.1 (there is little real difference):
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows. (applies to Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8/8.1)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
BCCode: 0a 0x0000000A
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
system manufacturer and device manufacturers sites.-----------------------------------
BCCode: 0a 0x0000000A
Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
IRQL_NOT_LESS_OR_EQUAL parameters
The following settings are displayed on the blue screen.
Parameter Description 1
Memory referenced
2
IRQL at time of reference
3
0: read
1: write
4
Memory address
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Resolution
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
Restart your computer.
Press F8 to character-based menu that displays the choice of operating system.
In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
Try disabling the cache in memory of the BIOS.
Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
Make sure that the latest Service Pack is installed.
If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are compatible with the version of Windows being installed. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.
Here is an example of debugging: (see this link)
http://msdn.Microsoft.com/en-us/library/ff560129 (v = vs. 85) .aspxBCCode: 0a 0x0000000A<-- read="" this="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-============================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.=========================================================
Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.htmlRedesign of chkdsk and the new model of health NTFS
http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx-----------------------------------------------------------------------------------------------------
Translate these methods Windows 8/8.1 (there is little real difference):
References to Vista also apply to Windows 7 and Windows 8/8.1.
It's my generic how updates of appropriate driver: (also update the BIOS and the low level)
drivers for chipset - see the website of the motherboard manufacturer of the system)This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmLook at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How do I run the memory diagnostic Windows 7 (and 8/8.1) - in Windows 8/8.1
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html==========================================================
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve problems of drivers in Windows Vista or 7 (or 8/8.1)
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Unable to get the windows updates. Get error code 80072EFE. Help!
Unable to get the windows updates. Get error code 80072EFE. Help!
Gary,
ERROR_INTERNET_CONNECTION_ABORTED 80072EFE
You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941
by running the Fixit on this page, you can reset to windows update components. but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components
suggest you download and save the Fixit. then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously. now run the Fixit and choose the default mode. restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. turn it back on when he finished the race and updates.
-
Please PLEASE help - I have Genuine Windows but had 2 re - install it n now I can't validate cuz this---> Validation incomplete: ActiveX error with error code [0 x 80080296].
What can I do? Thank you n God bless.Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
What problems do you think that reinstalling Windows can solve?
Did you do a repair installation, or you format and do a clean install?
=================================
Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
-Online Windows XP: double-click the executable file to run the tool.
-Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.
2. after running the tool, click the Windows tab, and then click the copy button (on the Clipboard).
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Help! Re: Analytics Fianacial failed with error Code = 36331
I get an error exactly reported under any other category are: Fianacial Analytics failed with error Code = 36331'
Workflow log shows error DB to the OLTP database...
ERROR: LM_36488 [Wed Aug 19 15:05:52 2009]: (5928 | 2384) task instance Session [SDE_ORA_GLJournals_Full]: [TM_6193 an error occurred during the expansion of the connection parameter [login name of ORA_R12 database for the database connection variable $DBConnection_OLTP is not defined.]
].]
Can anyone tell where is the probem
I have physical definition of data warehouse from the OLTP source-> test connection works very well->Yes, it's a bug, you can mark the string as replied.
Thank you -
Window updates error code #80072EFE in R2 2012 WindowServers
Hi Sir/Madam,
We have problems on the updates of the window and the error code 80072EFE #. We did some research and tried to figured it by certain methods, but unable to solve these issues.
We are appreciated if you could help with this.
I have attached the screenshot of the error as below: -.
Thank you.
Kind regards
Kenny
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Whenever I try to install latest updates the rom update to Windows, it fails every time with the following error:
Error code: 80072EFE
Error message: Windows Update encountered an unknown error.
What is the problem? How can it be cured? Is there another way to get the latest updates?
0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058and/or
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941TaurArian [MVP] 2005-2010 - Update Services
-
get error code 80072efe when windows tries to update
I keep gettig error code 80072efe when windows tries to update can't seem to know what means this code anyone can help
Hello
When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive this error code.
I suggest that you follow these steps/methods of the article below and check if the problem persists.
http://support.Microsoft.com/kb/836941
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0
And I also noticed that some hardware is not installed to properliy:
1 base system device:
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Device base system 2:
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803 base system device:
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880unknown device 1
ACPI\ENE0100
* ENE0100unknown device 2
ACPI\HPQ0004
* HPQ0004Can someone help me with this problem?
Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.
Maybe you are looking for
-
C310 printer all-in-one... reloaded software but can not find the SCAN function
HP Photosmart prem c310 with OS X 10.8.4. The scan function has stopped working. I removed the software and begin by downloading the all-in-one driver software on the HP site. To install it without problem, but the pilot for the sweep feature t
-
VPN3020 passes only Ping?
VPN3020, behind a PIX on a DMZ, firewall private side is located directly on LAN... When I raise the IPSEC tunnel, he no auth, I get an IP address, but for some reason any I can ping everything I want on the network, but that of all I can do, can't w
-
BlackBerry Smartphones 113 BB 8707v Jum error
Sometimes, I get an error message Jum 113 and have to reset the phone. Why?
-
Can we migrate Informatica transformation Scripts in Oracle Data Integrator?
HelloI just wanted to know that if we can migrate/move/use the transformation scripts that build in INformatica power Center in oracle Data Integrator. (ODI).If 'YES' then what the tool is used to migrate.with impatience.Kind regardsAMSI
-
I want to know the difference between columns days and day 1
Hi allI used this query:SELECT to_char (return_date_time, ' DD/month/yyyy hh24:mi:ss') Test,DECODE ('I', 'I', DECODE (1, NULL, NULL, 0, NULL, SYSDATE + 1)) days.DECODE ('I', 'I', SYSDATE + 1) day 1OF fm_curr_locnWHERE patient_id = 'DU00002765. 'outpu