Help with measurement registration

Similar Questions

• Need help with measurement excitation current OR 9219 Module

  Hello

  I have problems to find the answer to my question.  My question is...  How do you analyze the excitation of a 9219 module current?  It seems that the excitation current which is specified (0.0005 (A) is not what is provided at the exit.  With a load of KOhm 10.5 a 0.00025 current is output.  As the resistance changes as the current and measured excitation voltage seems to change.  I just need to know the resistance... So, if I can monitor the voltage and current I can calculate the resistace.  BTW, why don't the current excitement remains fixed in the first place?

  Thank you

  Nate

  Hi Nate-

  In almost all modes of the 9219, the current and the voltage automatically adjusts to the load it experiences.  The resistance is then measured according to the amount of current and voltage sunk by the load.  This is explained in 9219 User Guide and specifications.  The guide also States the the 9219 input impedance according to which mode it is.

  I hope this helps.  Good luck with your application!

• Help with incredible registration / Product Code procedure

  I bought 13 items first packaged and by trying to find/use the process series/product code number.

  I've been to the https://redeem.licenses.adobe.com/getserial site where you are supposed to enter a redemption code that 'Help' are 24 alphanumeric characters and located on the box or sleeve.

  There are six boxes in the entrance which can only mean that 4 characters should be in each box.

  There is no code redemption on the box and the sleeve has a number that does not match the format or the number of characters specified above.

  There is a single item of on handle and box 8-digit numbers that can not be.

  Under the sleeves Figure 8 number is a code that do not meet the 24 characters or groups of 4 required model.

  The code looks exactly like this, except that I substituted XXX instead of two sets of letters below (because if it is a product code, I won't post).

  DHS/A, PRE, 13.0, MAC, GEN, XXX, LRE

  / WWF/D/XXX

  Now there is no point for me and I don't see how there is nothing I can get above that meet the entry requirements for the product to https://redeem.licenses.adobe.com/getserial code entry

  It must be the most hostile registration procedure that I've met in all my 25 years of experience with computers and software.

  firedeva

  If you bought the box of first 13 items, you can expect something like that

  1. a box rectangular thin hard cover (colorful Adobe) in which is inserted a white rectangular box.

  2 in this rectangular box white installation discs, one for Windows and one for Mac - each drive is in its own envelope.  There is probably a manual mini in this area also.

  3. make sure the white rectangular box. On the back of this box must be a label. This label must contain the serial number of the product for the two installation disks.

  xxxx - xxxx-xxxx-xxxx-xxxx-xxxx

  The serial number is clearly identified as serial number.

  You know very well if the seller has sold you the product with a redemption code?

  RTA

• Need help with Toshiba registration

  I registered my product, but I chose the wrong puchrased countries: United States
  I have puchrased on the Switzerland, how can we change this?

  Here is the link where you can see product information http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/globalEntitlement.jsp
  Serial number is: 9B120304K
  Thank you)

  I don't understand why you use US page if you bought your laptop in Europe.
  Laptop registration using http://eu.computers.toshiba-europe.com/innovation/generic/services_warranty_reg_map_eu/

• Helps with 7852R input analog voltage measurement

  Hello

  I'm trying to measure three signals of tension off a QPD, the three signals are connected to the IA the SCB - 68 and then I used the example of vi to acquire analog inputs with FPGA R in the finder of the example. However, I make a range of very large numbers. I don't know how to convert these volts or what are these numbers, units... etc.

  Any help with this, please?

  Thank you

  Hi Biochemist_MU

  Please take a look at the forum post FPGA of analog input and output scale.  It deals with the scaling of the R-series cards.

  Hope this helps and let us know if you have any other questions.

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Problems with the registration of the guarantee for my Satellite A200

  I tried to sign up for my Satellite A200 laptop computer online and it did not work. I then had to send info and proof of purchase for Toshiba and heard nothing yet.
  Emailed Toshiba and heard nothing yet. Number 117 of what laptop Toshiba receipt for support and services. It is what makes me look to buy a Toshiba.

  What service? What support? All I want to do is register my warranty. Is someone there?

  Hello

  I have 2 different Toshiba notebooks and I could save the guarantee of all my books!
  These two laptops are European model Toshiba and I could register the warranty on Toshiba's European support page!

  If you have any problems with your registration, then contact the ASP in your country and ask for help. If they have not responded until now then contact guys.

  I put t know what's wrong in your case, but my recording of security went well and it was not a problem!

  Then contact the guy and ask for help! It cannot be that difficult.

  Good bye

• NOR USB6210, problem to trigger on a PowerPlay with measurement and automation

  Hello

  I use Labview version NIDAqmx 8.7 driver version 8.5.1,, Measurement & Automation explorer 4.4.1 and a device OR USB6210.

  I create a task with Measurement & Automation to make an acquisition of voltage on the AI0 channel.

  I want to use the function of digital triggering with the channel PFI0. I connect a signal square on the AI0, and PFI0 channels. I put the edge on the RISE, for example. When I make several acquisitions, and I notice on the curve that the USB6210 device does not fire correctly, sometimes used trigger edge is on the RISE and sometimes FALL.

  Could you help me? Is it a driver problem?...

  Thanks in advance, Daniel.

  OK, nice to hear that everything works as expected.

  Good luck,

• Help with a script

  Hi all

  I've been loving learning PowerCLI.

  I have problems, adding information to a script I had help with.  I have problems with the eastern line,

  Add-Member - InputObject $reportedvm - MemberType noteProperty-name GuestOs - value $VM. Guest.OSFullName

  I'll add the entire script bellows.  If someone could explain to me what I am doing wrong.  I get just white that colum in my CSV.  I guess that the $VM variable does not have property info I'm looking for.  I don't know if I have to do a join or something else to get this info.

  Here's the script as a whole.

  $reportedvms = New-Object System.Collections.ArrayList
  $vms = get-view - viewtype virtualmachine. Tri-objet-property {$_.} Config.Hardware.Device |  where {$_-is [VMware.Vim.VirtualEthernetCard]} |  Measure-object | {Select - ExpandProperty County}-descending
  {foreach ($vm to $vms)
  $reportedvm = new-Object PSObject
  Add-Member - Inputobject $reportedvm - MemberType noteProperty-Guest name-value $vm. Name
  Add-Member - InputObject $reportedvm - MemberType noteProperty-name-value of $($vm.) UUID Config.Uuid)
  Add-Member - InputObject $reportedvm - MemberType noteProperty-name GuestOs - value $VM. Guest.OSFullName
  Add-Member - InputObject $reportedvm - MemberType noteProperty-name ToolsVersion-value $VM. Config.Tools.ToolsVersion
  Add-Member - InputObject $reportedvm - MemberType noteProperty-name ToolsUpdate - value $VM. Guest.ToolsStatus
  $networkcards = $vm.guest.net
  $i = 0
  {foreach ($ntwkcard to $networkcards)
  Add-Member - InputObject $reportedvm - MemberType NoteProperty-Name "card$ {i}." Network"- value $ntwkcard.Network
  Add-Member - InputObject $reportedvm - MemberType NoteProperty-Name "card$ {i}." IpAddress"- value of $($ntwkcard.) IpAddress |? {$_ - like "*."} * »})
  $i ++
  }
  $reportedvms.add ($reportedvm) | Out-Null
  }
  $reportedvms | Export-Csv C:\temp\vm_nic_report.csv

  Try

  $VM. Guest.guestFullName

  instead.

  You're recovery VirtualMachine objects.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Strange problem with measurement of the color under Mac.

  Hello, I have a strange problem with measurement of the color under Mac. For example I create a gradient in Photoshop color 200 200 200 color 240 240 240. When I measure the color of the gradient with the Photoshop color measurement tool or with the built in OS X color measurement tool measured color is of 200 199 197 to 240 240 238. I measured the same gradient with Photoshop for PC and the values are OK (the same values that I create).

  I don't know what the problem is, but I think that the colors that I create are the same I have measure after creating them and also values between Mac and PC. I appreciate much help or information you could give me that helps me understand what is happening here.

  Thank you for your time

  Marcelo.

  Yep, you guessed it, evidence as monitor basically removes all profiling and just offer it right.

  is it possible to make the OS X color measurement tool to measure the original color values

  You mean the colors of paper - No., as I said photoshop filter your image through the profile document, proof of installation and the monitor profile. Why use Digital color meter for this though?

  I don't understand what is measurement of color values that will change every time point calibrate it my monitor.

  Because color values are "larger" what is on your monitor. Your monitor (via photoshop) makes only the best he can to display these values, which can be anything from LAB colors outside the range of your monitor - to the CMYK color. Calibration, it is the only way to allow your monitor to do this in any way accurately. (never really impossible) The monitors have a certain range and are only representations / would the REAL colors who is the holder of a document, with a profile. There's only one good reason to measure the monitor values so that is to build a monitor profile.

• Need help with Macbook

  Hello, I recently bought a Macbook from a friend and since I got the Mac it's very very slow at doing things like browsing the internet using Safari, it takes forever to load, web pages and all sorts of things that I'd like to get help with this problem maybe a few recommendations and also on how to speed up... If you need to care about Macbook, I can give these thx.

  To sell or transfer ownership of a Mac, even to a member of your family, you must follow these instructions. So far, you will have continuous problems.

  Refer to what to do before you sell or give away your Mac

  1. If you have enabled FileVault, disable it in system preferences > Security and privacy.
  2. "Remove" your iTunes account. Ditto for Audible if you have one.
  3. System Preferences > iCloud > deselect 'Back to My Mac' and 'find my Mac '.
  4. Disconnect from iCloud. Select "Delete from Mac" when it appears.

  Next: delete all of your personal information by erasing the internal storage of the Mac completely.

  1. If your Mac comes with a grey system installation DVD, start up your Mac with this disc in the optical drive, all holding the key c to boot from it instead of its internal volume, which must be erased before selling.
     • Apple stopped Macs shipment requiring these discs in August 2011.
  2. If your Mac does not comes with disks, boot OS X Internet Recovery:
     • using three fingers press on and hold the following keys: ⌘(command), optionand R.
     • With a fourth finger, press the power button to turn on the Mac.
     • Keep the other three fingers here where they are until you see the icon "spinning globe.
     • This method force the Mac to download BONES initially installed from Apple servers, that won't require not an Apple ID install.
  3. Remove any password Open Firmware, if you created a: select utility password firmware in the Utilities menu and remove.
  4. Select disk utility from the utilities menu.
  5. Delete all partitions that can be created.
  6. Select the icon for the hard drive to the Mac, and then select the tab "delete".
  7. Click on the 'Security Options' button and erase the drive.
     • More "robustly" you erase the disc, the longer it will.
     • The fastest method is sufficient, since all but the techniques more expensive and equipment will be able to recover data deleted safely.
  8. When he finishes, quit disk utility.
  9. In the utility menu, select Install Mac OS X .
     • An identifier Apple won't be necessary. If a prompt for an Apple ID, return to step 5.
     • Do not create user accounts.
  10. When he finishes, shut down the computer.
  11. If you want to install the bundled apps that have been included with your Mac, restart using your DVD Applications if it was included and install the bundled apps.
      • Apps, delivered with the new Macs sold without disks cannot be transferred. His new owner must buy them from the Mac App Store with its own Apple ID.

  If the Mac is sold to someone outside the family, consider the following additional information:

  1. System provided with your Mac installation DVD must stay with him forever and be included in the sale.
  2. Consider including your AppleCare certificate if you bought it, documents printed, same box if you have.
     • AppleCare remains with the equipment and can be transferred.
  3. Run an invoice indicating the serial number of the Mac.
  4. Once is no longer in your possession, remove the Mac of your devices in my support profile.

• Help with horror? El Capitan Mac

  Hello, I have major issues with horror.  It interferes with almost all of the process: navigation (Firefox or Chrome), MS Office, Adobe Pro, Finder...  I ran a report EtreCheck (see below) and the major problem seems to be Firefox.  I was wondering if someone could take a look at this and make other suggestions.

  Thank you!

  EtreCheck version: 3.0 (300)

  Report generated 2016-08-12 12:44:23

  Download https://etrecheck.com EtreCheck

  Time 06:53

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: Beachballing

  Description:

  Beach ball with Firefox, Chrome, MS Office, Adobe Pro, Finder

  Hardware information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7, 13 "(mid-2012)"

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 38

  Video information: ⓘ

  Graphics Intel HD 4000

  LED Cinema Display 1920 x 1200

  System software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 150,27 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  RD Slim BUP Seagate 2 TB

  EFI (disk1s1) < not mounted >: 210 MB

  SEAGATE External 2 to (disk1s2) Volumes/external Seagate 2 Tb: 2.00 TB free 1.20

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Apple's USB audio device

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Logitech USB-PS/2 optical mouse

  Apple Inc. Apple Keyboard

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.52 - SDK 10.9 - 2016-08-05) [Support]

  [loading] com.sophos.nke.swi (9.4.53 - SDK 10.9 - 2016-08-05) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 152 tasks Apple

  [operation] 65 tasks Apple

  [killed] 13 tasks Apple

  13 killed process lack of RAM

  Demons of launch system: ⓘ

  [loaded] 46 tasks Apple

  [loading] 150 tasks Apple

  [operation] 89 tasks Apple

  [killed] 6 tasks Apple

  6 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-02) [Support]

  [operation] com.brother.LOGINserver.plist (2016-03-10)

  [loading] com.gog.galaxy.commservice.plist (2016-04-24) [Support]

  [failure] com.maintain.PurgeInactiveMemory.plist (2016-06-09) [Support]

  com.maintain.Restart.plist [no charge] (2016-06-09) [Support]

  com.maintain.ShutDown.plist [no charge] (2016-06-09) [Support]

  [operation] com.maintain.SystemEvents.plist (2016-06-09)

  [operation] com.sophos.uiserver.plist (2016-05-12)

  Launch of the demons: ⓘ

  [performance]    BESAgentDaemon.plist (2016-05-16)

  [loading] com.adobe.fpsaud.plist (2016-06-28)

  [loading] com.gog.galaxy.clientservice.plist (2016-04-24) [Support]

  com.maintain.HideSpotlightMenuBarIcon.plist [no charge] (2016-06-09) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25)

  [operation] com.prey.agent.plist (2016-05-17)

  [operation] com.sophos.common.servicemanager.plist (2016-05-12)

  Launch User Agents: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2016-04-22)

  [loading] com.bittorrent.uTorrent.plist (2016-04-19) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11)

  [operation] com.spotify.webhelper.plist (2016-08-10) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-07-14)

  org.Hola.VPN.plist [no charge] (2016-08-01) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  MightyText application (/ Applications/MightyText.app)

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-02) [Support]

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-29)

  AdobePDFViewerNPAPI: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  AdobePDFViewer: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-29)

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-28) [Support]

  Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-29) [Support]

  The internet user Plug-ins: ⓘ

  Picasa: 1.0 - SDK 10.6 (2015-10-13) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-06-28) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,25 GB disc used: 348,98 GB

  Destinations:

  TB external Seagate 2 [Local]

  Total size: 2.00 TB

  Total number of backups: 29

  An older backup: 15/05/16, 06:27

  Last backup: 12/08/16, 11:45

  Size of backup drive: Excellent

  Size of backup 2.00 TB > (disk size 499,25 GB X 3)

  Top of page process CPU: ⓘ

  35% firefox

  11% kernel_task

  7% mdworker (13)

  4% WindowServer

  2% BESAgent

  Top of the process of memory: ⓘ

  GB firefox 3.08

  Kernel_task 848 MB

  180 MB mdworker (13)

  90 MB Microsoft Word

  Finder 82 MB

  Information about virtual memory: ⓘ

  24 MB of free RAM

  7.98 GB RAM (1.31 GB being cached) used

  3.01 GB used Swap

  Diagnostic information: ⓘ

  August 12, 2016, 12:24:55 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-122455_ [redact ed] .crash

  / Library/Sophos Anti-Virus/SophosWebIntelligence.bundle/Contents/MacOS/SophosWebIntelligence

  August 12, 2016, 12:00:06 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-120006_ [redact ed] .crash

  August 11, 2016, 01:40:07 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-11-134007_ [redact ed] .crash

  August 11, 2016, 10:17:21 /Library/Logs/DiagnosticReports/tcosrj_2016-08-11-101721_[redacted].hang

  / Volumes/VOLUME / * / Romeo & Juliet.app/Contents/MacOS/tcosrj

  August 11, 2016, 06:33:30 /Library/Logs/DiagnosticReports/_2016-08-11-063330_[redacted].crash

  ???

  August 10, 2016, 13:44:38 /Library/Logs/DiagnosticReports/firefox_2016-08-10-134438_[redacted].cpu_resour ce.diag [details]

  /Applications/Firefox.app/Contents/MacOS/Firefox

  August 10, 2016, 06:43:13 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-10-064313_ [redact ed] .crash

  9 August 2016, 15:17:53 self-test - spent

  First uninstall Sophos. Anti virus apps are not necessary and may cause problems. Remove the bittorrent as well. It can be a source od malware.

• How to get help with Add ons and extensions that stop working

  I have saved passwords and it has stopped working. It's so hard to get help with Moxilla

  rosemarybales said

  I still don't know why the extension button passwords saved with the key icon has stopped working.

  This button displays the saved passwords in Firefox's built-in password manager, is no separate passwords that record you in Dashlane. Can you save passwords in both places? (Well, I guess you do.)

  I have a guess on why it has stopped working. Firefox 40 has some changes to how extensions can work with the user interface, so quite a few extensions that have been more than one year must be updated for Firefox 40. It has been updated on January 10, 2012.

  Anyway, the way of 'long' to display the passwords saved in Firefox is through the Options page, the Security Panel, the saved passwords button.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.