Help with settings

Similar Questions

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.

• Need help with settings - wifi extension

  So I need help from networking. I have xfinity for my internet with a router/modem from arris tg1682g. However, it is located in a horrible place. So I run Ethernet to a central point and connected to an AirPort Extreme (latest version). Extreme, I ran Ethernet in the basement and connected a first gen express. I also have a second express gen located in the rooms upstairs.

  the extreme and express it is defined to extend the network, however the signal keeps a fall or be slowed down significantly even when you are inches apart. When I got the arris in bridge mode and the extreme to create the network and expresses it to extend everything worked fine. However, we have the security to the House installed xfinity, and they took the arris off mode bridge because they do not allow me to use the extreme for the security system. Since then, I got nothing else problems with my internet connection. It is either significantly reduced performance (up to 18mbps 150mbps).

  I also get error messages that the network is not found on the airport connected Ethernet devices.

  It has been very frustrating because the people Comcast it is horrible. So, any help would be greatly appreciated. Thanks in advance.

  https://discussions.Apple.com/message/29878786#29878786

  https://discussions.apple.com/thread/7195783 - is it possible to use the apple Time Capsule as a range extender?

• Need help with settings.

  I just bought the SanDisk Clip Sport. While setting the quick parameters, it was English as the language. Out of curiosity I scrolled down to see how many languages there was. I pressed the wrong button that I was flipping down the list and she chose an Arabic language and I can't get it back to English. I tried over and over.

  Is there anyone on this forum who can help me clear/restart this Mp3 player or am I out of luck?

  Try to follow these instructions step by step useful by DFELD2005:

  http://forums.SanDisk.com/T5/SanDisk-clip-sport/restore-language/m-p/355219#M3068

  Another way is to download and apply the latest firmware. This should reset the default drive:

  http://forums.SanDisk.com/T5/SanDisk-clip-sport/SanDisk-clip-sport-firmware-1-36-released/TD-p/35590...

• BlackBerry Q10 need help with settings for e-mail account on Q10.

  I used to have Bold9900 and possible to set different "Username" and "E-mail".

  Both will be in the form of e-mail, so recipients will see my name of the sender as the enamel on the 'User name' field and cannot see my real mail. (Provided by loxinfo @cscoms.com)

  However, once that the device was introduced to the new Q10. It is more possible to do.

  I have to use the same information on both fields.

  Is there anyway that I can check the parameters of Q10?

  Note: It is always also work the same way as Bold9900 on the iPad.

  Hello and welcome to the community!

  I don't know, from your description, exactly what you're looking for. "Username" and "E-mail"? You may be looking for the ability to enter a 'reply-to' e-mail address which is different from the actual email address of the account you are sending from? If so, this feature is indeed not currently available in BB10. Among other features, this is perhaps one that many hope are added to the BB10 platform with future versions of the operating system. But for now, it is what it is.

  Good luck!

• Help with settings Y500 SLI

  I just bought a Lenovo Y500 about a week ago and I noticed that the laptop uses only two graphics cards when it is connected to the power adapter. However, when I unplug it, it will only use a single graphics card. So, how can I get the system to use the two cards of the same when I am disconnected?

  To use the SLI (two graphics cards), it requires the 170w adapter to run at maximum performance. The battery can run a graphics card because she needs more power to run two.

• Help with Windows XP. Your security settings do not Web sites to use ActiveX controls installed on your computer.

  Original title: help with Windows XP.

  I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.

  Hi SteveKey,

  ·         You use Internet Explorer to access these sites?

  ·         If so, which version?

  Method 1: Run automated troubleshooting and check if it helps.

  Improve performance and security in Internet Explorer

  Method 2: Check to see if the following is useful.

  a. open Internet Explorer.

  b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.

  c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.

  d. click on the custom level button. The security settings window opens.

  e. scroll down to download signed ActiveX controls entry and select the quick option.

  f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.

  g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.

  Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Help with my ME settings for h.264 720 p

  Hi all. I really enjoyed to the tail upward exports in ME first, and then the batch code all at once. I do a weekly job where I will have one or two videos dozen finished in a sequence, so I need to put the entry points and and export each of them individually. With my old workflow in Final Cut Pro 7, I had to export each item one at a time. Just has them like ProRes and waited on them, and then took those compressor and I coded them in my final download YouTube format.

  With my new workflow, to keep good quality HD, I find that I can not queue for ME with what should be the right setting of h.264 720 p. So, I've been queues to ProRes and then taking these files to compressor for my final output of 720 p. Don't get me wrong, it is still faster than the old way I. But I want to make the tail just my code to ME with settings h.264 720 p in the first place and not make another encoding. So see if you can find something that I did it correctly.

  I'll post my ME and compressor settings I used. With compressor, videos come out looking really good. But with ME, it's really muddy. There are a few macroblocking and - I forgot the term for TI - where the gradient on a wall of a light will not have enough depth and a bad image. But the better term for what it looks like is just muddy.

  It comes to my Apple Compressor settings that work well for me:

  File extension: mov

  Planned size: 2.3 GB/hour of source

  Audio encoder

  AAC, stereo (L, R), 48,000 kHz

  Video encoder

  Format: QT

  Height and width: up to 1280 x 720

  Format of the pixels:

  By default the cultures: no

  Padding: Preserve the source aspect ratio (t 0, l: 0, b: 0, r: 0)

  Rate: (100% of the source)

  The selected Frame controls:

  Registration: (fast)

  The closest frame

  : Resize filter linear

  Deinterlace filter: Fast (on average line)

  Adaptive Details: On Antialias: level of details of 0: 0

  Field trip: progressive

  Type of codec: H.264

  Multi-pass: frame, rearrange: on

  Sampling: 24

  Spatial quality: 50 Min.

  Spatial quality: 50

  Temporal quality: 50

  Min. temporal quality: 50

  Average: 5.12 (Mbit/s)

  Maximum data rate: 5.12 (Mbit/s)

  Fast Start: on

  And here is a screenshot of my ME settings that I think should be comparable to the compressor settings.

  

  And here are two examples of videos to watch. To rule out other issues, I first encoded a master ProRes. Then, I took this file and encoded using the settings above for each program. File name shows who is who. Video is 36 seconds, and the files are approximately 22 MB and 16 MB. The file ME encoded is really great, even if it seems worse.

  https://drive.Google.com/folderview?ID=0B9g3lbp53ZU6WURFYURjVjN3anc & USP = Sharing

  I appreciate really all help on this. I certainly have a workflow that works for me right now, but if I could understand this point, it would save a lot of time for me and be much more effective. Thank you!

  SOUL is better and faster than the compressor.

  http://www.eventdv.NET/articles/news/feature/tutorial-encoding-H.264-video-in-Adobe-Media-Encoder-CS5.5-and-Apple-Compressor-4-80446.htm

  You should be fine to get the right files looking for PP with the option to export H.264.

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• EliteBook 8730w: need help with reset password BIOS HP Elitebook 8730w

  Dear community, I have a HP Elitebook 8730w and I forgot the BIOS password. I tried everything I could remember, I slept several days above to remind him, but I'm lost. I contacted HP support and they said that they would not help with a file of type smc.bin (which has been mentioned in many forums). No idea how to fix? I need to change the HARD disk but do not dare to do so that I can not configure the new HDD or SSD in BIOS.

  Help would be appraciated. I do not directly post P/N and S/N, due to privacy regulations in this forum. But if anyone can help me, please send a message and I'll post all the necessary details.

  I am a student and have small budget so I was willingly using this Elitebook old but fine. But now I'm really in trouble.

  @cecilia78

  Download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-k fX4AVH8oTCbsOM4X9a? DL = 0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Help with multitasking it please?

  Since I got my phone (Moto G 8 GB), multitasking has been terrible. I love the phone, but it's his left out major. Switching between the 2 applications at the same time generally involves having to reload the entire application, even some of the lighter applications such as contacts. I looked in the settings and everything is OK, as the apos as the default background. Also, I don't seem to have any heavy applications running in the background. Facebook is the heaviest app I have on my phone. I wonder if there is anything I can do to remedy to this or if anyone else has this problem?

  When you switch between applications, they restart because the system runs on the RAM. You see the message to reboot on some of these processes because the system killed these processes in order to keep others running and to free some RAM when its need is why you always have a bit of free RAM.

  Even the Air iPad with 1 GB of RAM, even that bike G, has problems, keeping applications running in the background. I'm afraid that this problem is quite normal if you have applications that run in the background taking up RAM. The system kills just the process relatively little important, as Google play music and display of WiFi, to keep others running and have at least a little memory available when it is needed.

  So you're an Android user average above that you have several applications that won't install average consumers, so I recommend going with a phone in the future who has at least 2 GB of RAM.

  P.S. I read in places that Motorola is aggressive with background applications to help with the battery, so maybe that is why the system cannot even keep apps simple people in memory, even if you have still a few available RAM.

• ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  I'm seeign as below errors in gpsvc.log and gpupdate/force fails with the error below.

  "Processing of Group Policy failed because of internal system error".

  RSOP appears in the confiuration computer, registry error, Unspecified.

  ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  SetRegistryValue: Could not open the key < software\policies\microsoft\windows\windowsupdate\au=""> 87

  Could you please help in investigating it?

  Concerning

  Murali

  Hello

  I suggest you to send your request in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  http://social.technet.Microsoft.com/forums/en/categories