Help with the AS3 Classes and packages

Similar Questions

• HP 15 - ac043tu: need help with the key feature and WiFi Drivers

  Hi team,

  I try to activate the key feature and WiFi in my new HP 15 - ac043tu laptop.

  I use Windows 7 Ultimate 32 operating system.

  I installed all the drivers available on the site Web of HP (http://support.hp.com/us-en/drivers/selfservice/HP-15-ac000-Notebook-PC-series/7771404/model/8326116... for my product.

  To activate the function key, I installed driver: HP System Event Utility - sp71716, but it doesn't seem to work.

  In Device Manager, network controller shows exclamation as shown below. I tried to install Broadcom and Realtek WLAN drivers, tried to turn on/off, uninstalled/reinstalled drivers referring to other positions, but that did not work.

  

  I also tried to install HP SoftPaq Download Manager, but it did not help. Tool does not show my product described.

  I went through a similar question posted by other members, but failed to get the solution. This question gave me hard times.

  Appreciate your help in this regard.

  Thank you

  Kishan

  Hello:

  You need these drivers wireless and bluetooth driver 64-bit file should have the 32-bit drivers too.

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

  Unfortunately, I can't help you with the next question.  The system of the event utility would be the only software I can think that would have worked.

  You can try the software HP Quick Launch, but I doubt it will work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_112835_1

• Re: Satellite A500 - need help with the FN key and Toshiba programs

  Hello

  The fn key Eco and other buttons specialized such as the one that opens Windows Media Player have stopped responding on my PSAM3A-03P00E A500 running Windows Vista. I can always change the brightness of the screen with the FN key, but no menu appears at the top of the screen.

  Also Toshiba programs that are intended to be run at the start as PC Health Monitor are not auto start, even if they are enabled in the Configuration (msconfig) system.
  The Bluetooth Manager however initially runs upward.

  I have blue screen errors, but they are not a problem since I have updated the BIOS to 1.5 and uninstalled Zonealarms.

  See you soon

  Hello

  Try reinstalling the additional package of Toshiba. AFAIK, this utility is responsible for these functions.

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• help with the menu button and the film load

  Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
  I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
  When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...
  
  Sending script
  mySender = new LocalConnection();
  on (release) {}
  ------each button corresponds to a different setting... 1,2,3,4,5,6
  _root.mySender.send ("menuconnect", "action", 1);
  ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
  Home.Enabled = false;
  couple.enabled = true;
  Events.enabled = true;
  Bridal.enabled = true;
  Media.enabled|disabled = true;
  RSVP.enabled = true;
  }
  
  
  
  Script of reception
  
  myReceiver = new LocalConnection();
  myReceiver.action = {function (doThis)}
  If (this == 1)
  gotoAndPlay (2);
  If (this == 2)
  gotoAndPlay (3);
  };
  and so and soforth for all six buttons
  myReceiver.connect ("menuconnect");
  
  If all this makes no sense at all, I'm sorry... I tried my best...
  If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all
  
  SJS

  I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

  If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

• Help with the Spry menu and templates

  Hello. I'm still learning Dreamweaver and stumbling through this all on my own. I just discovered models today and I'm hoping to use them to update my menu2 spry navigation bar. Except that it does not work for me. Is it because you just can't do that with spry? The menu does not update correctly when a new file with the model is stored in subfolders.

  I have the site set up with everything in the folder under the root except for the home page index.html file.

  so it's like this example:

  http://www

  about/mission/index.html

  When I go to new-page open-model the temaplte and save it in the folder... links from the template do not update correctly.

  They look like this:

  model is bound as follows in the models folder in my root directory:

  .. / about us

  .. / about / mission

  the index in the all file page is linked to this:

  .. / about us

  subject/mission

  The files inside the records change perfectly. But no matter what I do the topic of navigation does not update right. What's meaning? I can't understand how to post code here!

  No not really... list of default file name? I mean if I type in http://websitename.com/about/ it will go get the index.html file in this folder.

  It will be?  Then a similar link in your page should work.

  What happens when I use this:

  Mission

  is that it does not change in the subfolders. The... / the rest when it should not. Now I have not downloaded with links like this. I know that it doesn't work on my computer but when I look at the code I can see that the code is wrong.

  Look in the Site definition advanced settings > models > don't rewrite paths related document.  If this is true?  If so, uncheck the box.

• BlackBerry Z10 need help with the facebook chat and notifications

  Hey, guys.

  Since I updated to version 10.2.1.2102 of the software I was not able to receive messages from the hub of blackberry facebook chat. Before the update whenever I had my phone connected to a wireless network it was automatically getting messages facebook on the hub. Now, although I can send messages and receive messages if this contact is online, once I close the conversation hub is gone and I don't get the messages, only the "new messages of * person *" e-mail after a certain time.

  In addition, I don't get notifications about birthdays of the people. I get the "next event" x hours notification on the lock screen, if I go in the calendar I see the notification at the top of the page, but it does not sound to warn me of my birthdays from the contacts.

  Can someone help me with this two problems? Thank you!

  Fact. I needed to update the facebook app.

• help with the new laptop and elements...

  Hi all...

  I recently bought a copy of 11 items to the disc. I love the program and learn to use it. Here's my dilemma, as I bought the program, I decided to upgrade my laptop.  Currently I am working on a laptop that has a cd/dvd rom. my new laptop with Windows 7 will probably not a cd/dvd drive. My question is... are at - there a way to download my current copy of items on the new hard drive when I don't have a cd/dvd player or do I have to buy a new copy?  The answer will determine what kind of computer, I find myself with. Also, what processor recommend everybody to work with photoediting?

  Thanks for all your help!

  ~ Nancy

  There are resources available for the download items 11 on your new machine.  You will only need to have the serial number of the disc you purchased to activate the software to use fully.

  The Adobe site:

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=us

  A support site:

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  Photoshop/Premiere Elements 11:

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• Help with the Regular Expressions and regexp_replace

  Oh great guru Oracle can I can receive assistance
  
  I need to clean the phone numbers that have been entered in the table per_phones of Oracle e-Business. Some of the phone numbers have hyphens, some have spaces and some have tank. I just want to get out all the figures and then re - format the number.
  
  E.g.
  914-123-1234... out (914) 123-1234
  9141231234... new (914) 123-1234
  914 123 1234... (914) 123-1234
  MyPhone... just null
  (914)-123-1234... (914) 123-1234
  
  I really tried to understand the instructions of regular expressions, but for some reason, I can't understand it.

  For example:

  SQL> with sample_data as (
    2   select '914-123-1234' phone_number from dual union all
    3   select '9141231234'                from dual union all
    4   select '914 123 1234'              from dual union all
    5   select '(914)-123-1234'            from dual
    6  )
    7  select regexp_replace(
    8           regexp_replace(phone_number, '\D')
    9         , '(...)(...)(....)'
   10         , '(\1) \2-\3'
   11         ) as formatted_num
   12  from sample_data
   13  ;
  
  FORMATTED_NUM
  --------------------------------------------------------------------------------
  (914) 123-1234
  (914) 123-1234
  (914) 123-1234
  (914) 123-1234
   
  

• Please help with the extended search and replace

  Thanks in advance to dedicate time to help.

  Why does this work?

  Find: jpg ">"

  "Replace: jpg" alt = "" >

  Parameters:

  Current document

  Text (Advanced)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Click on replace all

  And nothing is found or replaced but there are many of them.

  I live and die by that in Homesite then please help me understand this so I must not have market Homesite too. I like it very much because such simple things makes me batty.

  You do this in the following parameters:

  Parameters:

  Current document

  Source code (and not text)

  Inside of the tag (img selected) and I tried to not inside tag

  All the option boxes unchecked

  Kind regards

  Vinay

• Please help with the oracle text and select for each word in the sentence

  Hello
  
  I have a problem with a query which NEEDS to be done in SQL (not pl/sql in the stored procedure):
  
  Suppose that a phrase such as "Church of snowboarding."
  
  Can I divide this by using:
  Select regexp_substr ('church snowboard', ' [^] +', 1, level) word
  of the double
  connect regexp_substr ('church snowboard', ' [^] +', 1, level) is not NULL)
  
  now I have words 'showboard' and 'Church '.
  
  So far so good.
  
  Now I need for each of these words, to create a list of unique IDS collected using text oracle contains the query as follows: (pseudocode)
  for SPLIT.word in "snowboarding", "Church".
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, SPLIT.word, 1) > 0
  UNION
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, ' SYN('||)) SPLIT.word: ', GR_THESAURUS)', 1) > 0
  UNION
  SELECT 100 AS NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE NAME LIKE '% "| SPLIT.word | '%'
  
  so of course I have to untangle this UNION to remove duplicates
  
  Anyone here sees a way out of my situation? A way to make the loop in a select (use with and such) then
  Just add a select distinct NO_MATRC, NO_NOM_ from)
  
  I tried, but I'm out of ideas so I thought that some guru here might have the answer ;)
  
  Thanks in advance for any advice
  
  See you soon

  You might end up with something like the XML below, ideally as binding in the query.

  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, e
  Church of snowboard
  
  transform ((JETONS, "{", "}", "AND"))
  transform ((JETONS, "{", "}", "OR"))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'AND'))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'GOLD'))
  transform ((JETONS, «?)) {","} "," AND"))/seq >
  transform ((JETONS, «?)) {","} "," GOLD"))/seq >
  
  
  
  (1) > 0

• Need help with the error message and lose internet

  c:\\Users\TheJohnsons\AppData\Roaming\d3dx9.dll

  Keep this error message and lose internet. Can someone tell me how to get rid of it? Do an internet search revealed programs for free download that I know are malware. The other message is c:\\Windows\System32\Spoolsv.exe

  Thanks in advance.

  c:\\Users\TheJohnsons\AppData\Roaming\d3dx9.dll

  Keep this error message and lose internet. Can someone tell me how to get rid of it? Do an internet search revealed programs for free download that I know are malware. The other message is c:\\Windows\System32\Spoolsv.exe

  Thanks in advance.

  Download and run the DirectX end-user running, to see if we can eliminate the d3dx9.dll message.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35

  Regarding the message in spoolsv.exe, see thread below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/spoolsvexe-process-is-running-all-the-time-and/8268f671-51b8-42A3-9CE8-708e9686052d

• Help with the new computer and Dreamweaver CS6

  Hi all.

  I currently have Dreamweaver CS6 on CD.  I need to replace my current computer and the computer that I'm looking has no optical drive. Can I download Adobe's Dreamweaver CS6 and use my CD key to activate it, or do I need to have a creative cloud membership continue to use Dreamweaver CS6?

  Thank you

  Fery

  Your serial number of the CD should be all you need.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Help with the part number - paw index screen X230ti

  Can anyone help with the reference number and or the availability of the small 'legs' that sit in the slots on each side of the keyboard on a X230ti? They locate into the slots with the screen and prevent movement when the lid is closed.

  I have the same and among the small beasts broke and the screen tends to rotate when closed.

  Have searched for a parts list but cannot find the "paw" in any list that I found. Thank you

  Here is a picture of the X230t keyboard (and palmrest) framework. You can see the small 'legs' to belong to him.

  I hope someone from Lenovo will tell you how to order this part. EDIT: part number 04W6808.