Help with the Universal Installer - installation of database for ODBC gateway

Similar Questions

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Need help with the driver 64 bit, Win 7 for Photosmart C8180

  Hello. I downloaded the 64-bit driver for Windows 7, the Photosmart C8180 All-in-one. It shows the download link, the download for 64-bit file is the same file as the 32-bit file. However, I downloaded one that says that it is for the 64-bit Windows 7, in any case. http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3204...

  I uninstalled my printer. I clicked on my new .exe file, which was supposed to be for Windows 7, 64 bit. Installed just fine. However, when I go into Device Manager and my printer, it shows that the driver is a 32-bit. (which makes sense, since if you look at the 64-bit, or 32-bit download, both are the same file.)

  I have a program on my computer it is more precisely a 64-bit program, and it let me use the ability to scan, until my all-in-one printer has a 64-bit driver. I think HP has accidentally put even tranche under the 64-bit file as they have under the 32-bit download. Anyone come across this or know what I can do?

  Thank you!

  Honestly, I think that is what is happening, you should have the driver correct 64 bit for your printer.  Since you mentioned, that they just released the 64-bit program, it is also possible that it may be a relatively new problem which they are ignorant.

  I have two recommendations for you.

  One would be to get back in touch with them and let them know that you have installed 64-bit drivers and it may be a problem with the program.

  The only other option I can think would use the 32-bit software, although I know that you really want to use the 64-bit software.

  I'm not familiar with their program enough to know what could possibly be the cause of the Analyzer must be gray and not recognized, especially if it worked before when you use the 32-bit software.

• Help with the download installation wizard.

  Hello

  I just got a WRT54G2.  My computer CD players do not work so I try to install the downloadable Wizard. I downloaded it from this page: http://www.linksysbycisco.com/US/en/support/WRT54G2/download

  What I get is a .iso file and I have no idea how do run as an installation wizard program.  I did research for a few hours and I tried some programs, but what they let me do it see files but does not work for the installation wizard.

  How to run the installation wizard the downloaded file only?

  Thank you

  -Pascal

  A .iso file is an image of a CD. Burn it to a cd - r with roxio or nero or other software you are burning. You can also try the magic disc (freeware) that will mount the iso image to a virtual cd drive. Your best best is probably just to burn it to a cd. Hope that helps!

• Need help with the fix KB 900243... for use high CPU with file W3WP.exe

  SBS 2003 Enterprise.

  This hotfix contains two files:

  1 WIndowsServer2003-KB900243 - x 86 - enu.exe
  2 WIndowsServer2003-KB900243 - x 86-symbols - enu.exe
  Which of them install?  Or if the two, what order.
  Thank you.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Need help with the installer of widows

  Hello, I need help please. I've been downlading an update for my Kodak 5000 series printer. In the middle of the installation, my power went out due to a storm. When I got back to complete the update, the update will not settle. The installer gave me a message saying that it could not complete the installation because of corrupted files. I contacted the support of Kodak, they tried to solve the problem and it was determined that the problem was with the windows installer and that I would need to contact microsoft. Then I tried to run windows update and my updates would not move. He gave me the error code 80070673 and also windows update error code dt000. Can someone please help me solve this problem. I am running vista Home premium service pack 1 edition of widows.

  Hello, Joe

  Try to do a system restore to before it started. Go to start, all programs, accessories, System Tools, open system restore and choose a date when the power is out.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LJ-Pro-200-Color-MFP-M276-Full-solution-12201 - Windows XP - fatal error has occurred with the HP Installer

  Can someone help me to go with my new printer.  I'm unable to go ahead with the HP Installer.  Message error "fatal error occurred...". »

  Download Driver on the hp site does not.

  Have done the following:

  1 deleted everything about previous printer

  2 removal of Skype

  3. unlocked in the properties of the Application

  4 defrag

  5. full scan

  6 firewall & AVG 'off '.

  7. disk cleanup

  8 dial-a-fix

  9 Windows Update

  10 scanned with AVG App

  11 rebooted 3 times

  12. revival of the installer of HP 7 times

  13 checked compatibility

  Thank you very much.  I would be grateful 'something' anyone can suggest.

  Concerning

  Elaine

  JALOPY,

  I just tested the installation program and it works fine. Please check if you have a universal print driver installed on your machine. If you do, then I suggest this uninstall, reboot and try again.

  You can check to see if you have the driver installed by accessing your print server properties, click the driver tab and see what drivers are installed.

  Please let me know if it works or you need help.

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002