Help with video playback frame rate - please?

Similar Questions

• HELP * how can I synchronize my audio to a video variable frame rate?

  How can I synchronize my audio to a video variable frame rate?

  Something like the hand brake allows you to change the video to the CFR...

  Handbrake download page: https://handbrake.fr/downloads.php

  Neil

• Flash video and frame rates

  I have a SWF that plays (streaming) video, as well as graphs synch up with benchmarks d.
  Video and SWF file are the two 8 FPS. However, this makes the interpolations in the SWF a little awkward. I read that you should make your animations Flash the same rate as the video, but I was wondering if I could take the SWF output up to approximately 18 frames per second for preteens animations smoother? Does not appear to affect video playback. Why would this be a problem?

  I'm streaming from FMS2 FLV and SWF file that I use now has a rate of 18, with no apparent problems. I'll stick with what I think. I guess that the question of equal frame rate between video and Flash is no longer relevant when the video is embedded in Flash.

  Thank you all.

• Need help with video scrolling

  Hello

  I need help with a project. Subsequently, I want is that a webcam controls the position of the mouse and the mouse position

  control of a video. But I would like the part where the mouse position controls the video.

  So, if the mouse is on the left on your screen, the video will be on the first image and when you move, you're the mouse for

  the right to the video play as a result traffic. and stop when the mouse is completely right.

  Effectivly the scrolles from the mouse through the video. It must be on the x-axis.

  I'm not that formilliar with flash, so any help would be great

  THX!

  Thijs

  what you need to do, is to designate a rectangle where users can use their mouse to scroll through the video.  If this rectangle has instance name bar, you can use:

  var m, b:Number;

  var lastSeek:int = getTimer();

  flv_pb.addEventListener (MetadataEvent.METADATA_RECEIVED, f);

  bar.addEventListener (MouseEvent.MOUSE_MOVE, moveF);

  function f(e:MetadataEvent):void {}

  paramF (0,0,stage.stageWidth,e.info.duration);

  }

  function moveF(e:MouseEvent):void {}

  {if (getTimer () - lastSeek > 1000)}

  flv_pb. Seek(m*e.stageX+b);

  lastSeek = getTimer();

  flv_pb. Play();

  }

  }

  function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

  m = (y2 - y1) / (x 1 - x 2);

  b = y1 - m * x 1;

  }

• Need help with as2 as3 conversion. Please, I beg you.

  Could someone help me to convert as2 as3, please?

  Source code:

  _root.magnet = 500;
  _root.magic = 10;

  and

  onClipEvent (load)
  {
      homex = this._x;
      homey = this._y;
      forcex = 1;
      forcey = 1;
  }
  onClipEvent (enterFrame)
  {
      x0 = this._x;
      y0 = this._y;
      x1 = this._xmouse;
      y1 = this._ymouse;
      distancex = x1 - x0;
      distancey = y1 - y0;
      distance = Math.sqrt(distancex * distancex + distancey * distancey);
      powerx = this._x - distancex / distance * _root.magnet / distance;
      powery = this._y - distancey / distance * _root.magnet / distance;
      forcex = (forcex + (homex - x0) / 2) / _root.magic;
      forcey = (forcey + (homey - y0) / 2) / _root.magic;
      this._x = powerx + forcex;
      this._y = powery + forcey;
  }

  I am a newbie in flash so if anyone can help with this would be great.

  I really need to be done please help me.

  MovieClip(root).magnet = 500;MovieClip(root).magic = 10;
  

  and

  var homex:Number = yourmc.x;var homey:Number = yourmc.y;var forcex:Number = 1;var forcey:Number = 1;
  
  yourmc.addEventListener(Event.ENTER_FRAME, loopF);
  
  function loopF(e:Event){    var x0:Number = e.currentTarget.x;    var y0:Number = e.currentTarget.y;    var x1:Number = e.currentTarget.mouseX;    var y1:Number = e.currentTarget.mouseY;    var distancex:Number = x1 - x0;    var distancey:Number = y1 - y0;    var distance:Number = Math.sqrt(distancex * distancex + distancey * distancey);    var powerx:Number = e.currentTarget.x - distancex / distance * MovieClip(root).magnet/distance;    var powery:Number = e.currentTarget.y - distancey / distance * MovieClip(root).magnet/distance;    forcex = (forcex + (homex - x0) / 2) /MovieClip(root).magic;    forcey = (forcey + (homey - y0) / 2) / MovieClip(root).magic;    e.currentTarget.x = powerx + forcex;    e.currentTarget.y = powery + forcey;}
  

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Problem with video playback... Help, please...

  I have problem with watch and listen to the youtube video in my player. I have Windows XP, Windows media player 11, Real player, player time Quik and nothing happens. The videos are uploaded but no work. I pray for the advice...

  Hello

  · Do you receive an error message or error code when you try to play the file?

  · Were there any changes made on the computer before the show?

  · What is the file format of the video file?

  · It's happens on any particular video that you downloaded?

• Please help with a poster frame

  I imported a FLV Flash by using "Import video" and select a pre-built skin that gives reading, caption and volume. The film a autoplay turned off when I saw on the Web page, it displays a black screen first and the skin below. I would like to insert a poster frame which will hide when the user presses play on the skin. I was a novice with 1 ACE and 3.0 makes me facepalm. Need help please, I already tried Flashkit and Actionscript.org and not gotten any responses. Thank you!!

  Just add a listener for your component.  for example, if your component instance name flv:

  flv.addEventListener (MouseEvent.CLICK, f):

  function f(e:MouseEvent):void {}

  removeChil ((yourpic_mc);

  }

• Please help with videos not displayed

  I bought two videos on videohive. All I do is put my photos in the placeholders and make videos.

  I did with three other videos and everything went well.

  but these two I bought today is displayed like this:

  http://www.andybrain.com/sciencelab/WP-content/uploads/2008/01/color-bars.jpg

  Any ideas what is happening? latest version of quicktime and Ae...

  Thank you very much.

  It's a typical missing images because either you do not have images in the right folder. Just double click, select replace sequences and then find the missing images and it will redo the link.

  It's really basic things. Maybe you should look here... Basic on AE stuff

• Problem with video playback in adobe CS4 pro first

  Whevener I put something in my video. Through it be either A fraps recorded video or a video shot by my camera... I put in the library and drag it to the stage. and when I play the video right in the first remains as a still image, but audio playback. It does this with 2 methods I tried (Fraps and my Photosmart M537 camera). I asked my uncle (who had the same issues with the CS3 version) and he said that something wrong with the Codec of theres sure hes. I think it's because when I put my video I had recorded with Hypercam 2. It has worked well. Could someone help me please?

  1. research of fraps - a lot of problems, a few success stories forum

  2 what CODEC is used for Photosmart M537 camera?

  If it is a camera that has a video mode, you might have to convert it to AVI DV type 2 with its 16-bit 48 kHz

  A link with a lot of ideas on the computer to install http://forums.adobe.com/thread/436215?tstart=0

  A lot of ideas on the following link are generic, they have contributed to some Non-first users solve problems
  Work through all the steps (ideas) at the http://ppro.wikia.com/wiki/Troubleshooting

  If your problem is not resolved after following all the steps, report with the PRECISION required in the questions at the end of the troubleshooting link

• Need help with video "vignette" Locket

  Help me decide if it of feasible or "worth" in regard to ease, it would be. I have an image of sleeping dog head. I want to put a video of the 'dream' is to have the dog in the dog park as a soft oval sharp as a video insert on the dog's head. I am a beginner and training and to see that an image can be cropped to leave a smaller image that can be imposed on another full image frame. The question is how to get the image in a thumbnail that 'floats' above the background image.

  Is this possible? Built-in effect? - or difficult to do?

  TIA,

  Ken

  Lots of ways to do that including a mast and vignette in Photshop.

  But using an oval track matte effect / elipse you create in the Titler first is a way to explore.

  Read how caches work.

  Read how to create title (circle / oval.. .what ever) and how to fill it.

  A blur may help as well.

  Blend modes can be pleasant to use.

• Problems with video playback in PE4

  I did the project using MPEG Streamclip to create video clips in AVI format and then using these clips in projects of PE4.  I add some titles and burn a DVD and I started.  I tried to do one of those bills yesterday, and now it does not work.  I was able to use MPEG Streamclip to create my clips.  Then I opened a project in PE4 and import 27 clips (total time 6 minutes).  I created my titles and went to read the Bill and it will not playback.  Then, PE4 crashes and takes me in the program ("... because Adobe close...)

  I can't return to the project I've tried several times.

  To my knowledge on my computer, nothing changed a few months when I did my last project of this type.  I have 408 GB of free space on my hard drive and 2 GB of RAM, so I think that Wouln't's question.

  I've updated my software Quicktime yesterday, and that made no difference.

  Any suggestions?

  Susan,

  There is a limit on the amount of physical RAM PrE can use. There is also a limit on the amount of physical RAM a 32 bit OS can see and use, and also how he can use. Once you reach these limits (they may also differ for the program), will more zero for performance, it is not accessible and might even interfere with the ability of the OS to see what he can see.

  I recommend that you install only what their operating system can work with. With a 32-bit operating system, it will be ~ 3 + GB of RAM. Most the MoBo allow 4 GB of RAM installed, so there is a bit of overage. This will be probably no problems, either. I have 4 GB on all my machines, if I still ~ 3 GB limit. A machine has the/3 GB switch, so it out a little more than 4 GB of RAM physical, though not really that much. This switch can cause problems with some systems and with some programs, so I do not have a blanket recommendation to use it. We should do, after exhaustive tests with all programs on this machine, followed by the performance of each. They should also put the things up, so that they can return easily, safely and quickly, if something does not work.

  A NLE (of Non-linear editing) program will focus on its system. It will be with the processor, the physical RAM and also subsidiary e/s system, which is the HARD drive. Each of them is an important part of the performance equation. In most cases is the order of importance: IO, CPU, and RAM. With AVCHD and a few other highly compressed formats/CODECS, the role of the CPU and i/o are reversed. In my observations, RAM still runs third in this equation, but it is always important.

  A NLE computer is a complex beast, with things infrequently, which gives great advantages (such as this article on the setting to the top of his computer), or when the changes major performance perks. Addressing all aspects, IO, CPU and RAM are the best way to approach it. It would be with AVCHD, CPU, i/o and RAM, in that order. All are important and to varying degrees, each will get the observable performance improvements.

  Getting back to your question about RAM, within the limits of your BONES, your programs and your motherboard, the performance increases will be there, but probably not very dramatic. They are there, but a mere observer might not be aware of them. Passing a drive HARD internal three and distribute properly to show them more quickly and be more noticeable. Go with a faster processor will do the same, if you can't see this helping hand to certain operations, such as rendering. With the media and sustainable development projects, improvement of I/O will get the biggest "bang for the buck."

  Hope this helps.

  Good luck

  Hunt

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• Help with Action script 2.0 Please

  Hello
  I'm new to actionscript and I really could with little help please. I'm loading external movie clips in two different containers depending on which button is clicked. Sometimes, there may be two conatiners attached to a buuton click, while the other buttons may only need to download a video clip. Here is the action script, I've been using:
  
  Button1.onPress = function () {}
  _root.createEmptyMovieClip ("container", 1);
  _root.createEmptyMovieClip ("Container1", 2);
  unloadMovie ("container1");
  loadMovie ("scene2.swf", "container");
  loadMovie ("scene5.swf", "Container1");
  
  Container._x = 50;
  Container._y = 110;
  container1._x = 170;
  container1._y = 5;
  }
  Button2.onPress = function () {}
  loadMovie ("scene6.swf", "container");
  unloadMovie ("container1");
  Container._x = 50;
  Container._y = 110;
  }
  
  It is responsible for the movies, but I have to press first button both work. Ideally I need to be able to call a movieclip at any time. Can someone tell me where I'm wrong?

  Try to move these lines outside the function of the button:

  _root.createEmptyMovieClip ("container", 1);
  _root.createEmptyMovieClip ("Container1", 2);

  You can use 'this' instead of '_root'... that will save any problem if you never move it to some other films. In addition, move the x / y assignments right under these lines since they relate to them directly.

• have the icon to download helper with video up, I have until it clicks, dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  I was able to load videos 26 then he stopped down. I checked the preferences, the version is 4.9.24, I can see that the video is listed next to the icon, when I drag the mouse over it.

  I support download icon, when the video is running. I click next to the icon and choose the game I want, on fast download I see it loads, but no dwhelper. dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  There is a problem with DownloadHelper Firefox 36. They are working on a new version, you can download and help test this discussion page:

  https://groups.Google.com/Forum/#! Forum/video-video downloadhelper-5