Problem with video playback in adobe CS4 pro first

Similar Questions

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Problems with video playback in PE4

  I did the project using MPEG Streamclip to create video clips in AVI format and then using these clips in projects of PE4.  I add some titles and burn a DVD and I started.  I tried to do one of those bills yesterday, and now it does not work.  I was able to use MPEG Streamclip to create my clips.  Then I opened a project in PE4 and import 27 clips (total time 6 minutes).  I created my titles and went to read the Bill and it will not playback.  Then, PE4 crashes and takes me in the program ("... because Adobe close...)

  I can't return to the project I've tried several times.

  To my knowledge on my computer, nothing changed a few months when I did my last project of this type.  I have 408 GB of free space on my hard drive and 2 GB of RAM, so I think that Wouln't's question.

  I've updated my software Quicktime yesterday, and that made no difference.

  Any suggestions?

  Susan,

  There is a limit on the amount of physical RAM PrE can use. There is also a limit on the amount of physical RAM a 32 bit OS can see and use, and also how he can use. Once you reach these limits (they may also differ for the program), will more zero for performance, it is not accessible and might even interfere with the ability of the OS to see what he can see.

  I recommend that you install only what their operating system can work with. With a 32-bit operating system, it will be ~ 3 + GB of RAM. Most the MoBo allow 4 GB of RAM installed, so there is a bit of overage. This will be probably no problems, either. I have 4 GB on all my machines, if I still ~ 3 GB limit. A machine has the/3 GB switch, so it out a little more than 4 GB of RAM physical, though not really that much. This switch can cause problems with some systems and with some programs, so I do not have a blanket recommendation to use it. We should do, after exhaustive tests with all programs on this machine, followed by the performance of each. They should also put the things up, so that they can return easily, safely and quickly, if something does not work.

  A NLE (of Non-linear editing) program will focus on its system. It will be with the processor, the physical RAM and also subsidiary e/s system, which is the HARD drive. Each of them is an important part of the performance equation. In most cases is the order of importance: IO, CPU, and RAM. With AVCHD and a few other highly compressed formats/CODECS, the role of the CPU and i/o are reversed. In my observations, RAM still runs third in this equation, but it is always important.

  A NLE computer is a complex beast, with things infrequently, which gives great advantages (such as this article on the setting to the top of his computer), or when the changes major performance perks. Addressing all aspects, IO, CPU and RAM are the best way to approach it. It would be with AVCHD, CPU, i/o and RAM, in that order. All are important and to varying degrees, each will get the observable performance improvements.

  Getting back to your question about RAM, within the limits of your BONES, your programs and your motherboard, the performance increases will be there, but probably not very dramatic. They are there, but a mere observer might not be aware of them. Passing a drive HARD internal three and distribute properly to show them more quickly and be more noticeable. Go with a faster processor will do the same, if you can't see this helping hand to certain operations, such as rendering. With the media and sustainable development projects, improvement of I/O will get the biggest "bang for the buck."

  Hope this helps.

  Good luck

  Hunt

• Problem with video playback and color

  Whenever I try to playback video, it has the red and yellow bars vertically above my video. When I rub it, video is fine, but when it is on a fixed image looks like it of a corrupted file and export the files with the same problem. It is not the computer or camera because I can read in an editor similar like Final Cut on the same computer or on a different computer first, and I ingested several file formats (AVCHD, MP4 and MPEG 2) cameras still problem in the exact same manner.

  Is there a software framework I am missing or is there a problem with the first?

  check this: FAQ: Why am I getting yellow and red lines running through my images on pause?

• Problem with the help of Adobe Premiere Pro *.prproj files between PC and MAC?

  Hi, I have finally got myself a MAC with a grunt to replace my PC and installed first Pro CC of the cloud on the Mac.

  I copied the files on my PC, but when I try to open the first Pro CC (*.prproj files) I get the following error:

  "This project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version"

  I don't understand, like the MAC and PC versions of first Pro CC have been downloaded from the cloud to Adobe.

  Can anyone offer advice please?

  Hi, Ashton,.

  There is no problem of incompatibility between Mac and PC files (files .prproj) project

  In your case, it is not updated to the version of Premiere Pro that is installed on your Mac. If the creative application cloud shows first as update, try updates to help Premiere Pro > updates... Menu.

  FYI: You should have first installed 2014.2 Pro BUILD 8.2.0 (65)

  Thank you

  Regalo

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• Problem with video playback... Help, please...

  I have problem with watch and listen to the youtube video in my player. I have Windows XP, Windows media player 11, Real player, player time Quik and nothing happens. The videos are uploaded but no work. I pray for the advice...

  Hello

  · Do you receive an error message or error code when you try to play the file?

  · Were there any changes made on the computer before the show?

  · What is the file format of the video file?

  · It's happens on any particular video that you downloaded?

• Problems with video capture in Final cut pro verses first CS5

  The codec used in the capture of a video of the PCF, I cannot import the FCP in first CS5. Video I get clients who capture video in FCP and then send it to me. Is there a different capture format, they can use or y at - it a codec that is available that does not cost a fortune, working first for windows?

  Yes, I am intimately familiar with P2 and edit in Premiere Pro - I have done so for four years. You don't need drivers for P2 unless you are actually mount the card P2 or the camera to your computer. Premiere Pro will edit the images natively without any additional installation. The applies to all formats that can be recorded to P2, including DV, DVCPRO, DVCPRO 50, DVCPRO HD, and AVC-Intra. If someone offers you a complete workout of the P2 files (folder structure) and you can import and edit all these without additional work around.

• problems with video playback in Captivate 8

  I'm trying to convert a MOV video in FLV or F4V format, using Media Encoder and then place the FLV video on my Captivate project for viewing.  But my converted video is coming to the course with audio only.  Is there a way to solve this problem and get the file to read correctly?

  I have experimented with a number of different outputs from the Media Encoder, but no matter what put me in the library and place it on my blade, I can't play.  Sometimes, I'm just one black box, other times I get a black box with audio only.

  Thank you!

  OK, I found a solution a little goofy, but it works and is now my new workflow!

  I can download the MOV files on my YouTube account and then download it in MP4.

  In captivity then imports the MP4 movies successfully.

  Still not sure why the Media Encoder could not handle the conversion, but it was apparently the problem.

• Problem with video playback USB OTP-S185

  Before I bought the S185, I tested my laptop hard drive to an S590.  All formats video my played fine.  Now on the S185, mp4 files created by my Sony EX1R camera cannot be found or read.  I copied the files exactly as they were created. There is a dated folder name, a file BPAV folder CLP, a marked media file, then the media file with other metadata. What is the problem?  Yet once the S590 has no problem finding and reading it.  According to specifications, both players have the same format, reading ability. I tried updating the drive and it did not help.

  Hello USER 965970.
  Welcome to the community of Sony and I thank you for your message.

  Check if the BDPS185 play other video files.
  Try putting only the. MP4 files on the hard drive and check if the Blu - ray player recognizes the files.

  Try to reset the player.
  All personal settings will reset to the default factory settings.

  Using the supplied remote control of the player, press the HOME button.
  Then, select the option settings (brief case icon).
  After that, select the reset option.
  Finally, the option "factory Reset factory settings.

  Thank you.

• Problem with the installation of adobe Premiere Pro CS6 on a new computer

  I'm trying to install Adobe first ProCS6 on a new computer laptop and I get the message that my serial number is wrong. I have it running on my old machine, and I have my original packaging with serial number printed. Why I can't get the software to install? Do I need a new package for Win10?

  Please visit: https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  I hope this helps.

  Concerning

  Megha Rawat

• problem with video playback in mp4

  I have a series of video files that are introduced by using a text box. The goal of the project is marketing so let's publish it to mp4. When I publish my text time very well, but when the video starts, it does not play, the chronology continues to move forward then video captures just play right were shows of the Player bar. This occurs for each of 4 videos that I currently have in my folder. I tried the setting procedure for the video files such as streaming or progressive download.

  Useful ideas would be greatly appreciated.

  Hello

  Welcome to the Adobe Forums.

  Please try to add the video on each slide as a video event (if you're not distribute to multiple slides) and then publish it on mp4.

  If the step above does not help then try to add a video to a new test project, publish mp4, and then check the result.

  What operating system do you have?

  Please let me know the status.

  Thank you

  Vikas

• I have the problem with video playback in windows media player

  I solved the problem by adjusting the parameters of my graphics card. Option to make the best image was then i unchecked it and adjusted to the original settings, app.

  I solved the problem by adjusting the parameters of my graphics card. Option to make the best image was then i unchecked it and adjusted to the original settings, app.

• Problem with video player

  Hi experts,

  I'm under 2 problems with video player in my application:

  1. the backlight turns off automatically after 30 seconds by default during playback of a video file.

  2. impossible to adjust the volume, he always plays with the highest volume.

  When I try to play the video by media player integrated BB Bold, the volume is adjustable and the backlight is on during the display of the video. Is it possible to do the same thing in my application?

  Thanks in advance,

  Kind regards

  Binh Nguyen

  -For the first problem, you will need to set the backlight to yourself in the code, something like:

  If ((Display.getProperties () & Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT)! = 0)
  {
  Backlight.Enable (true, 20);
  }

  Be careful about the number of seconds that you pass to the enable(). They are tp limited 255 seconds even if you spend a lot. This means that if your video is longer than 255 seconds, you must call the activate more than once. I usually call it the timer as well as check the status

  -For volume control, the player does not meet the default control buttons. You need to implement it in your code.

  Set the class of player that you use to implement the method as follows:

    protected boolean keyControl(char c,int status,int time)
      {
          if(c == Characters.CONTROL_VOLUME_UP)
          {
              //IncreaseVolume;
          }
          else if(c == Characters.CONTROL_VOLUME_DOWN)
          {
              //decreaseVolume();
          }
          return super.keyControl(c,status,time);
      }
  

  Where the increseVolume is something like:

  If (_Kit! = null) //_vc = player VolumeControl
  {
  _vc.setLevel (volumeLevel);
  }

  Rab

• My audio and video playback stutters in cc pro 2015.

  my audio and video playback stutters in cc pro 2015.  It complies with the source, or the window of the program.  Continues even if my project is rendered.

  Win 10 64.

  2 x xeon x 5675,

  Quadro 6000,

  48 GB RAM,

  2 128 gb SSDS as a RAID 0 256.

  Is it because I only have the disk for the storage and the OS/software?

  [title published by mod]

  Try to change the entry to zero.

  If you want to continue to use the release of the nVidia card, try to remove the sound card completely.