Help with voting system (PHP)

Similar Questions

• Help with Mac Dreamweaver PHP

  Well, I finally PHP in HTML works however the directory structure is totally confused me.  I put files is/MAMP/htdocs and yet nothing works unless I add/MAMP/htdocs/htdocs and place the index and other files ALSO php in there.  I have to open those of/MAP/htdocs and still when I run it using my test server files in/MAMP/htdocs/htdocs are those that are actually used.

  My setup of SITES is

  Test server

  local/network

  / Applciations/MAMP /.

  http://localhost: 8888.

  I should be grateful if you would help to understand how to properly configure the DreamWeaver SITE so that I can put all the files in the MAMP/htdocs and eliminate the reducntant one.

  Thank you

  Rick

  If you use MAMP, your local site of DW must be something like this:

  /Applications/MAMP/htdocs/sitename

  Htdocs being roads MAMP default localhostfile. Any site you have in the htdocs directory will be suffixed with localhost in your browser to test.

  For example, your site (work files) files can be put in a folder and this file must be placed in the MAMP Application folder in "htdocs" folder.

  Say, you have a folder named 'test' containing index.php and this folder is placed in htdocs, your local site DW will be:

  /Applications/MAMP/htdocs/test

  To check in the browser, you just enter

  http://localhost: 8888/test

  This will run the index.php file in the default test folder.

  Your test server can be the same aslocalhost:8888 / test' for the site.

  If you want your remote FTP also configured, enter the details of your host and get configured.

  -ST

• HP 630: Need help with the system off code 54257826

  Try to install the OS on HP 630.  54257826 disabled BIOS password locking system. Any help please.

  Hello

  Enter 41135208

  Kind regards

  DP - K

• Need help with my System Configuration

  Hi people,

  I just needed a little help to redefine the configuration of my system as it was before it was modified in order to obtain the help of a technician of HP.

  I would even be willing to post my residential phone #, so that a microsoft technician could help me by phone or by virtual contact. in any case...

  I have a Toshiba Satellite that was purchased in 2008. It runs using Vista (x 64). Basically, I needed some advice to help me set up the configuration of the system. ((in such a way that only the 2 Volume 1)) globe Internet connection monitor battery 3) plan & 4) AVG antivirus are loaded and displayed when the system opens. In other words, it takes only the most basic and necessary things.

  See that this would be really useful if I could provide my phone number and could contact by phone and virtual rooms, so that you (the techie) could exploit my system and I can see what is happening.

  Waiting for a response. Thank you!!!

  Hi PRASANTH JOSEPH,.

  Perform a clean boot and check.

  Note: After the boot minimum troubleshooting steps, follow the link step 7 to return the computer to a Normal startupmode.

  You can also view the Microsoft support article.

  http://support.Microsoft.com/contactus

• Help with character in PHP

  Hello

  I am trying to allow a request to accept the characters such as: ' (Apostrophe)

  But I am nowhere.

  The application will not perform if there are special characters in one of the fields of the form and the habit so insert in the database

  Do I have to change the charset of the query?

  I tried: $mysqli-> set_charset("utf8")

  But I get the error: Fatal error: call a member function set_charset() on a non-object in /home4/X/public_html/productions/productions_update.php on line 57

  Thank you

  Max Resnikoff says:

  Hello

  I am trying to allow a request to accept the characters such as: ' (Apostrophe)

  But I am nowhere.

  The application will not perform if there are special characters in one of the fields of the form and the habit so insert in the database

  real_escape_string/stripslashes should work.

  $news = $conn-> real_escape_string (stripslashes($_POST['news']));

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Help with the session variable PHP CS5.5 - Please

  Hi all

  I am needing a little help with the help of a session variable, and I hope someone can point me in the right direction.

  I created a PHP page that uses the Dreamweaver 'User authentication' feature and the basics of this works very well, to direct a user to the correct page depending on whether they are or are not a valid user. I want to customize the page 'user valid' with people, user name entered in the authentication of the user table... a seemingly simple task using a session variable, but I just seem not to be able to make it work!

  The generated code for the AU on page 1 is the following:

  <? PHP

  Validate request to connect to this site.

  If (! isset {})

  session_start();

  }

  $loginFormAction = $_SERVER ['PHP_SELF'];

  If (isset($_GET['accesscheck'])) {}

  $_SESSION ['PrevUrl'] = $_GET ['accesscheck"];

  }

  If (isset($_POST['txtfirst_name'])) {}

  $loginUsername = $_POST ['txtfirst_name'];

  $password = $_POST ['txtsurname'];

  $MM_fldUserAuthorization = "";

  $MM_redirectLoginSuccess = "member_update.php";

  $MM_redirectLoginFailed = 'login.php ';

  $MM_redirecttoReferrer = false;

  @mysql_select_db ($database_panto, $panto);

  $LoginRS__query = sprintf ("SELECT firstname, name OF web_access WHERE firstname = %s AND family name = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $panto) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  If (via PHP_VERSION > = 5.1) {session_regenerate_id (true) ;} else {session_regenerate_id() ;}

  Declare two session variables and assign them

  $_SESSION ['MM_Username'] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  If (isset($_SESSION['PrevUrl']) & & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  Header ("Location:".) $MM_redirectLoginSuccess);

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  }

  ? >

  First of all, the text highlighted in red above seems to be setting the session variable that I need. Is this correct?

  If so, what is the code that I need to put on page 2 to use this session variable? or

  I have to do something else on the page 1 to correctly assign the session variable?

  Would be very grateful for your expertise

  Mark

  It seems that you put the columns incorrectly in the user authentication server behavior. This is the SQL query that checks the credentials of the user:

  $LoginRS__query = sprintf ("SELECT firstname, name OF web_access WHERE firstname = %s AND family name = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  You are looking for first name and last name, while you should look for the user name and password of the user.

  $_SESSION ['MM_Username"] is a session variable that stores the login name of the user. To use it in a page, all that is needed is the page start with session_start(). You can then echo the value to display.

  If you want to display the person's true name, you must create a recordset in the second page, use of $_SESSION ['MM_Username'] to search for the first name and the patronymic. Alternatively, you can change the code like this (I copied only part of it):

  $LoginRS__query = sprintf ("SELECT firstname, surname OF web_access WHERE firstname = %s AND password is %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $panto) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  $row = mysql_fetch_assoc ($LoginRS);

  $_SESSION ['full_name'] = $row ["FirstName"]. ' ' . $row ['name'];

  If (via PHP_VERSION > = 5.1) {session_regenerate_id (true) ;} else {session_regenerate_id() ;}

  Declare two session variables and assign them

  $_SESSION ['MM_Username"] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  You can then use $_SESSION ['full_name'] in a page which begins with session_start().

• PLEEEEZE... Help with specing on a new PC, NTSC system CS5.5 (links included)

  Help with specing on a new PC NTSC with CS5.5 Master Suite. Windows 7, 64 bit. Will be used mainly for PP & still, some AFX & PS. editing a lot of avchd! Calendar usually between 1 1/2 to 2 hours in length, 2 or 3 LAYERS.

  I've seen the benchmark page but found very confusing. I also read the forum reading many posts similar but found submerged :-)

  KEY CONCERNS: Not sure, the choice of the video card or whether to go 6 core. I don't want to spend much more, unless I need to.  Ideally I would like to put all THE project files on the DRIVE 2 Raid 0 without divide them upward on separate drives. I'll be able with such a system?

  PROCESSOR: Intel Core i7-960 3.2 GHz LGA 1366 converted (boxed) SKU:275222 $199.99 boxed processor (I could go octacore, don't know yet)

  http://www.microcenter.com/single_product_results.phtml?product_id=0330706

  Or should I go 6 octo core? : $594^.99

  http://www.Newegg.com/product/product.aspx?item=N82E16819115066

  VIDEO card: Zotac ZT-40201-10 P GTX 470 1280 MB GDDR5 PCIe 2.0 x SKU: 838375 ((IS THIS THE BEST CHOICE?)) $200.00
  

  http://www.microcenter.com/single_product_results.phtml?product_id=0342176

  24 GIG RAM: Kingston HyperX memory 4GB 240-pin DDR3 SDRAM DDR3 1600 desktop

  http://www.Newegg.com/product/product.aspx?item=N82E16820104244 $186,00

  SYSTEM DRIVE: Western Digital VelociRaptor WD3000HLFS 300 GB 10 000 rpm 16 MB http://www.newegg.com/Product/Product.aspx?Item=N82E16822136322 $149.99

  VIDEO PLAYERS: 2 DISCS VIDEO software RAID 0: Seagate sata 6.0 3TO http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215 x 2

  Dump of disk: Seagate sata 6.0 3TO 1 http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215.00

  Motherboard: ASUS Sabertooth X 58 Intel LGA 1366 X 58 SATA 6 GB/s USB 3.0 ATX Intel MB http://www.newegg.com/Product/Product.aspx?item=N82E16813131665

  BLURAY BURNER: Pioneer black Blu - ray burner SATA BDR-206DBKS http://www.newegg.com/Product/Product.aspx?Item=N82E16827129066 & Tpk = BDR-206DBKS $109

  : COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP black steel ATX full Tower Compucase case with USB 3.0 and inner black http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160 & cm_re = 2-_-11-119-160-_-Product COOLER_MASTER_HAF_93

  $154,48

  Power SUPPLY: Thermaltake Black Widow W0319RU 850W ATX http://www.newegg.com/Product/Product.aspx?Item=N82E16817153106

  $129.99

  1 Yes

  2. 4 GB. DDR3-1600 + in a bag to hex or 2 packs of sorting of the brand and the desired model.

  3. why not get the new GTX 570 or 580? They are more silent and cooler.

• PHP, help with the site of the legacy database

  Hope someone can help with this, although I might be a little vague. (But will be happy to post any code which may help.)

  Basically, I'm doing a few sites for a company, and everything comes together nicely any movement towards a new reseller hosting account where all can site. Basically, I'm doing some redesign and new work of database for them.

  But there is a site that I am basically just try to hover over, which already has a database. I copied the site on the new hosting, copied from the database through and created a new connection file.

  I admit that the code is all PHPO a little heavier than what I am used to working with. If you have encountered a problem trying to understand what data is not displayed due to failure of queries. I can say that the connection is working, and queries have not changed.

  In any case - the homepage is here, where you should be able to click on the images of furniture to go to the product page:

  http://www.miradatravelmedia.com/lusty/public_html/index.php

  But when you click on through the product page request fails:

  http://www.miradatravelmedia.com/lusty/public_html/products.php?category=1

  The products page is mainly PHP and looks like this:

  [PHP] <? PHP

  If (! @empty($_REQUEST["img"])) {}

  require_once("..) ("/ includes/hft_image.php");

  $img = new hft_image($_REQUEST["img"]);

  $img-> resize(200,180,"-");

  $img-> output_resized("");

  "exit";

  }

  $page = "products";

  include("..) ("/ includes/header.php ');

  include("..) ("/ includes/db_open.php");

  $sql = "SELECT 'id', 'name', 'CATEGORIES' WHERE 'id' = '. $_REQUEST ['category']. "'";

  $result = mysql_query ($sql) or die ("failed query: $sql to the line". "") __LINE__);

  $category = mysql_fetch_assoc ($result);

  ? >

  < div id = "trail" > < a href = "shop.php" > shop < /a > & gt; "" Lloyd Loom <? PHP echo $category ['name']? > < / div >

  < div class = "clear" id = "divider1" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  Lloyd Loom < h1 > <? PHP echo $category ['name']? > < / h1 >

  <? PHP

  $sql =

  "SELECT *". "."

  ""PRODUCTS.

  "WHERE"category"= '". $_REQUEST ['category']. "' " .

  ' ORDER BY 'order ';

  $result = mysql_query ($sql) or die ("failed query: $sql to the line". "") __LINE__);

  If (mysql_num_rows == 0) {}

  ? >

  < p > to come... < /p >

  <? PHP

  } else {}

  $n = 0;

  While ($row = {mysql_fetch_assoc ($result))}

  $n++;

  ? >

  < a href = "product.php? id = <?" PHP echo $row ['id']? ">" class = 'product' <? "php if ($n == mysql_num_rows ($result)) echo" id =-'last\' "?" > >

  <? PHP

  If ($file = glob ("images/products / '. '")) $row ["id"]. "_*.*")) {

  ? >

  < img src = "img.php? img = <?" PHP echo $file [0]? > & width = 200 & height = 180 "alt =" <? " PHP echo $row ['code']? ">" / >

  <? PHP

  } else {}

  ? >

  < div id = "no_image" > no image found < / div >

  <? PHP

  }

  ? >

  <? PHP echo $row ['code']? >

  < /a >

  <? PHP

  If (is_int($n / 4)) {}

  ? >

  < div class = "clear" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  <? PHP

  }

  }

  }

  ? >

  < div class = "clear" id = "divider2" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  <? PHP

  include("..) ("/ includes/footer.php ');

  ? > [PHP]

  If someone could shed some light on what goes wrong again, that would be much appreciated.

  Thank you.

  Iain71 wrote:

  OK - changed the line of the query and get the error message: no database selected...

  The answer lies in the connection of database script, db_open.php. There should be a call somewhere to mysql_select_db().

• can anyone help with drivers for Minolta Scan3 double for the Vista operating system

  If anyone can help with drivers for Minolta Dualscan 3 working with Vista?  3 Dualscan will work with Windows 7 or Linux?

  Hi Mike,.

  You can download and install the drivers for Minolta Dualscan 3 from this link.

  http://onyxftp.mykonicaminolta.com/download/Search.aspx?HT=

  Hope the helps of information.

  Please post back and we do know.

• Pls help with system restore - there was trouble, uninstallation of big Mo Prog., to make room for SR....

  Finally, the C drive seems to have 55 MB of available space. However, the system restore does not appear to knit - restore points may not be created.

  Finally, the C drive seems to have 55 MB of available space. However, the system restore does not appear to knit - restore points may not be created.

  Hey old activist

  Read the information below about system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  How space hard disk System Restore require?

  To store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new.

  and if you still have problems uninstalling programs try program revouninstaller free from the link below

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Walter, the time zone traveller

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Need help with Macbook

  Hello, I recently bought a Macbook from a friend and since I got the Mac it's very very slow at doing things like browsing the internet using Safari, it takes forever to load, web pages and all sorts of things that I'd like to get help with this problem maybe a few recommendations and also on how to speed up... If you need to care about Macbook, I can give these thx.

  To sell or transfer ownership of a Mac, even to a member of your family, you must follow these instructions. So far, you will have continuous problems.

  Refer to what to do before you sell or give away your Mac

  1. If you have enabled FileVault, disable it in system preferences > Security and privacy.
  2. "Remove" your iTunes account. Ditto for Audible if you have one.
  3. System Preferences > iCloud > deselect 'Back to My Mac' and 'find my Mac '.
  4. Disconnect from iCloud. Select "Delete from Mac" when it appears.

  Next: delete all of your personal information by erasing the internal storage of the Mac completely.

  1. If your Mac comes with a grey system installation DVD, start up your Mac with this disc in the optical drive, all holding the key c to boot from it instead of its internal volume, which must be erased before selling.
     • Apple stopped Macs shipment requiring these discs in August 2011.
  2. If your Mac does not comes with disks, boot OS X Internet Recovery:
     • using three fingers press on and hold the following keys: ⌘(command), optionand R.
     • With a fourth finger, press the power button to turn on the Mac.
     • Keep the other three fingers here where they are until you see the icon "spinning globe.
     • This method force the Mac to download BONES initially installed from Apple servers, that won't require not an Apple ID install.
  3. Remove any password Open Firmware, if you created a: select utility password firmware in the Utilities menu and remove.
  4. Select disk utility from the utilities menu.
  5. Delete all partitions that can be created.
  6. Select the icon for the hard drive to the Mac, and then select the tab "delete".
  7. Click on the 'Security Options' button and erase the drive.
     • More "robustly" you erase the disc, the longer it will.
     • The fastest method is sufficient, since all but the techniques more expensive and equipment will be able to recover data deleted safely.
  8. When he finishes, quit disk utility.
  9. In the utility menu, select Install Mac OS X .
     • An identifier Apple won't be necessary. If a prompt for an Apple ID, return to step 5.
     • Do not create user accounts.
  10. When he finishes, shut down the computer.
  11. If you want to install the bundled apps that have been included with your Mac, restart using your DVD Applications if it was included and install the bundled apps.
      • Apps, delivered with the new Macs sold without disks cannot be transferred. His new owner must buy them from the Mac App Store with its own Apple ID.

  If the Mac is sold to someone outside the family, consider the following additional information:

  1. System provided with your Mac installation DVD must stay with him forever and be included in the sale.
  2. Consider including your AppleCare certificate if you bought it, documents printed, same box if you have.
     • AppleCare remains with the equipment and can be transferred.
  3. Run an invoice indicating the serial number of the Mac.
  4. Once is no longer in your possession, remove the Mac of your devices in my support profile.

• Help with horror? El Capitan Mac

  Hello, I have major issues with horror.  It interferes with almost all of the process: navigation (Firefox or Chrome), MS Office, Adobe Pro, Finder...  I ran a report EtreCheck (see below) and the major problem seems to be Firefox.  I was wondering if someone could take a look at this and make other suggestions.

  Thank you!

  EtreCheck version: 3.0 (300)

  Report generated 2016-08-12 12:44:23

  Download https://etrecheck.com EtreCheck

  Time 06:53

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: Beachballing

  Description:

  Beach ball with Firefox, Chrome, MS Office, Adobe Pro, Finder

  Hardware information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7, 13 "(mid-2012)"

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 38

  Video information: ⓘ

  Graphics Intel HD 4000

  LED Cinema Display 1920 x 1200

  System software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days

  Disk information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 150,27 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  RD Slim BUP Seagate 2 TB

  EFI (disk1s1) < not mounted >: 210 MB

  SEAGATE External 2 to (disk1s2) Volumes/external Seagate 2 Tb: 2.00 TB free 1.20

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Apple's USB audio device

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Hub keyboard Apple, Inc.

  Logitech USB-PS/2 optical mouse

  Apple Inc. Apple Keyboard

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Kernel Extensions: ⓘ

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.52 - SDK 10.9 - 2016-08-05) [Support]

  [loading] com.sophos.nke.swi (9.4.53 - SDK 10.9 - 2016-08-05) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 152 tasks Apple

  [operation] 65 tasks Apple

  [killed] 13 tasks Apple

  13 killed process lack of RAM

  Demons of launch system: ⓘ

  [loaded] 46 tasks Apple

  [loading] 150 tasks Apple

  [operation] 89 tasks Apple

  [killed] 6 tasks Apple

  6 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-02) [Support]

  [operation] com.brother.LOGINserver.plist (2016-03-10)

  [loading] com.gog.galaxy.commservice.plist (2016-04-24) [Support]

  [failure] com.maintain.PurgeInactiveMemory.plist (2016-06-09) [Support]

  com.maintain.Restart.plist [no charge] (2016-06-09) [Support]

  com.maintain.ShutDown.plist [no charge] (2016-06-09) [Support]

  [operation] com.maintain.SystemEvents.plist (2016-06-09)

  [operation] com.sophos.uiserver.plist (2016-05-12)

  Launch of the demons: ⓘ

  [performance]    BESAgentDaemon.plist (2016-05-16)

  [loading] com.adobe.fpsaud.plist (2016-06-28)

  [loading] com.gog.galaxy.clientservice.plist (2016-04-24) [Support]

  com.maintain.HideSpotlightMenuBarIcon.plist [no charge] (2016-06-09) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25)

  [operation] com.prey.agent.plist (2016-05-17)

  [operation] com.sophos.common.servicemanager.plist (2016-05-12)

  Launch User Agents: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2016-04-22)

  [loading] com.bittorrent.uTorrent.plist (2016-04-19) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11)

  [operation] com.spotify.webhelper.plist (2016-08-10) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-07-14)

  org.Hola.VPN.plist [no charge] (2016-08-01) [Support]

  User login items: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  ClipMenu application (/ Applications/ClipMenu.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  MightyText application (/ Applications/MightyText.app)

  Internet Plug-ins: ⓘ

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-02) [Support]

  FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-29)

  AdobePDFViewerNPAPI: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  AdobePDFViewer: 11.0.15 - SDK 10.6 (2016-05-02) [Support]

  Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-29)

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-28) [Support]

  Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-29) [Support]

  The internet user Plug-ins: ⓘ

  Picasa: 1.0 - SDK 10.6 (2015-10-13) [Support]

  3rd party preference panes: ⓘ

  Flash Player (2016-06-28) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,25 GB disc used: 348,98 GB

  Destinations:

  TB external Seagate 2 [Local]

  Total size: 2.00 TB

  Total number of backups: 29

  An older backup: 15/05/16, 06:27

  Last backup: 12/08/16, 11:45

  Size of backup drive: Excellent

  Size of backup 2.00 TB > (disk size 499,25 GB X 3)

  Top of page process CPU: ⓘ

  35% firefox

  11% kernel_task

  7% mdworker (13)

  4% WindowServer

  2% BESAgent

  Top of the process of memory: ⓘ

  GB firefox 3.08

  Kernel_task 848 MB

  180 MB mdworker (13)

  90 MB Microsoft Word

  Finder 82 MB

  Information about virtual memory: ⓘ

  24 MB of free RAM

  7.98 GB RAM (1.31 GB being cached) used

  3.01 GB used Swap

  Diagnostic information: ⓘ

  August 12, 2016, 12:24:55 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-122455_ [redact ed] .crash

  / Library/Sophos Anti-Virus/SophosWebIntelligence.bundle/Contents/MacOS/SophosWebIntelligence

  August 12, 2016, 12:00:06 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-12-120006_ [redact ed] .crash

  August 11, 2016, 01:40:07 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-11-134007_ [redact ed] .crash

  August 11, 2016, 10:17:21 /Library/Logs/DiagnosticReports/tcosrj_2016-08-11-101721_[redacted].hang

  / Volumes/VOLUME / * / Romeo & Juliet.app/Contents/MacOS/tcosrj

  August 11, 2016, 06:33:30 /Library/Logs/DiagnosticReports/_2016-08-11-063330_[redacted].crash

  ???

  August 10, 2016, 13:44:38 /Library/Logs/DiagnosticReports/firefox_2016-08-10-134438_[redacted].cpu_resour ce.diag [details]

  /Applications/Firefox.app/Contents/MacOS/Firefox

  August 10, 2016, 06:43:13 AM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-08-10-064313_ [redact ed] .crash

  9 August 2016, 15:17:53 self-test - spent

  First uninstall Sophos. Anti virus apps are not necessary and may cause problems. Remove the bittorrent as well. It can be a source od malware.