CP2025 problems of black smears

Similar Questions

• The following printhead (s) has a problem: yellow/black [K/Y].

  I bought 'HP OJ Pro L7380 AiO' on 12-06 - 2008 and it took out of the box on 12-08 - 2008, and when I tried to install it, the first time, I get the error:

  The following printhead (s) has a problem: yellow/black [K/Y].

  Edit (add this paragraph):
  (1.), I turned on the printer for the first time, and it was not connected to the computer.
  (2) this error on the printer screen after some initials self-tests & installation messages.
  (3.) I tried to remove & clean the black print head & putting back a few times, but it did not help.

  I used "the following printhead (s) has a problem" to search for information on the internet (Google) and found ONLY this phrase:
  The following printhead (s) has a problem: yellow/black [K/Y].
   
  This only means and confirms that the "Black" printhead has a problem and HP has done NOTHING to solve this problem. HP didn't even bother to warn / help buyers at the time of purchase.
   
  I called HP customer service and I was told to take the printer to service center. .. Out of the box and the service center! It's so frustrating!
   
  I lost the satisfaction of purchasing a new product!

  It's JUST that I buy a new printer, get out the box and have to take it to service center because it won't get installed?

  Message edited by angelique on 10/12/2008 02:41

  Since you have owned less than a week, can you not take her back to the store and exchange it?  If you bought it online, then a return period as well.  Or you can directly call HP and tell them you want to return if you have no way to take it back to the place of purchase.

  Unfortunately, sometimes things just happen, and products are shipped with defects.  This happens to every manufacturer at one point.  Take the printer back and exchange it.

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• problem of 'black square' of linked illustrator files

  Problem:

  When you bind the specific .ai files into another file .ai, Illustrator shows what appears to be a pattern of black squares instead of the actual image. See the screenshot below.

  The files I want to connect are perhaps created in a previous version of CC 2015, I don't remember.

  Failed attempts to solve the problem:

  I tried resolve to re-record the files in the latest version before the link, but does not help.

  I also tried to reinstall a previous version of Illustrator (19.0), but does not solve the problem.

  I tried to disable the GPU settings does not help.

  This "bug" may have the same cause as the problem of black square symbol? (Giving black squares symbol Stainer )

  System information:

  -Now I am running Adobe CC 19.2.1 running release, 64 bit. 10 Windows.

  

  I hope someone can help out me. I'll have more than 180 of these files and won't copy and paste the line from one file to the other drawings.

  The file placed there compatibility PDF allow?

• Problem of black screen of HP HDX 16 display of 1160-United States

  Hi, I have a HP HDX 16 1160-United States and earlier, my screen went suddenly dark but if I put my face very close to the screen, I could see the desktop icons and the Start button. I looked around on the internet for possible reasons that this was happening. One of the solutions was to change the lcd inverter, so I changed it. Once I turned on the laptop with the lcd inverter new, the laptop shows everything well, but after that I turned it works, the screen went black again. I even searched the internet and found another solutuon and who should change the backlight. For me, it made sense to change it because here comes the light, so I changed that too, but unfortunately this does not work either. I didn't know what I should do after that point so I called HP to see if I can give them to fix, but they do have the parts more for my laptop.

  Now I'm on request here if someone has this similar problem and if they got the resolute. If you guys can help me out, it would be useful.

  Hey @thundervolt,

  The only other option would be to try to replace the screen.

  I can't encourage you to replace the motherboard if this does not work because the replacement it requires you to install a new service ID in the BIOS that cannot be done without the exclusive HP software... technically speaking. I have heard and read about some users who were able to do with third-party software, but I would advise against that and the cost of the replacement of the motherboard could be better invested in a new laptop.

  Looks like we're at an impasse.

• Satellite L650D startup problem - only black screen

  Hello Experts,

  I have Toshiba Satellite L650D which is strange since the last few days.
  The problem is that it lights in general.

  Unlike other similar problems on the web, he won't go to the Toshiba start screen.
  Screen stays black! When I try first to power, I hear only a few sounds DVD player nothing else.
  When I try to reset it now button / stop for 30 seconds or more, I hear hard drive (or power) sound, but nothing happens.

  I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  . I am writing from the same laptop. If I stopped it now, it will still take me 30 minutes and many random combinations of hard reset to make it work.

  Someone suggested that the power output of the card could be a problem. can we check voltage output without fancy electrical appliance?

  Help, please. I can't afford new laptop right now.

  > I have reset hard randomly wihout battery powered, with battery without power and without battery without power. After many attempts it suddenly starts normally and works fine afterwards. It is since the last days of thre appening. whenever I have stop, I have to do

  I'm afraid there's something wrong with the motherboard or the part connected to the mobo as RAM modules m.
  If you have not checked the RAM modules in the past, I'd recommend this as faulty RAM could affect the functionality of the laptop. In addition the RAM modules are not very expensive, so it s worth to check the following items.

  But please don t understand me wrong. I put t say there is a problem with the RAM. I said, this could be the troublemaker. So please don't be disappointed if this workaround solution would not help.

• Irish critical update needed to solve the problem of black and white tv on the G20!

  I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

  Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

  I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

  The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

  I found the settings for the United Kingdom-

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
  @= "United Kingdom".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
  @= "Ireland".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

  Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

  Hope this helps someone...
  laters taters...

  Hi Joseph

  It is very nice to hear that you solved your problem and thanks for the comments!

  Good luck!

• Edge 2 - driver problems / random black screen

  I have a relatively new Lenovo Edge 2 a few months old.

  Problem I have currently: screen goes black randomly, but the light is always on, no mouse pointer, sound turns off too (similar to the hibernation perhaps?).

  I get a message at the beginning to the top there is a problem with one of the pilots. But when I check the drivers, everything seems to be up to date (its set to automatically in any case).

  I had a similar problem before, another message from pilot. The problem was that my laptop don't would not connect to wifi at less than the power mode has been totally exacerbated. Something about the laptop thinking its low in battery mode and the abandonment of wifi connection, I connected via electrician and updated the driver wifi I think and the problem solved. What is a similar problem? There seems to be a problem with this laptop and the sleep mode / low status for the battery maybe mode driver. How can I remedy this?

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• problem of black ink HP photosmart printer

  I have a printer HP photosmart B110a and the black ink cartridge will not print. I tried replacing, switching works etc, but cannot make it work. This looks like a common problem from what I see on the forums. I'm very fed up with this problem. Can anyone help?

  Did you get an improvement for all after letting soak the printhead? Have you checked the evacuation on the cartridge area to see if it is clogged?

  1. If the duct is blocked, use a straight pin to gently remove the excess glue from the vent.

• HP6520 - problem with black ink - no black ink on paper

  I have a 6520 All in One – this week the printer decided to stop printing in black ink - cartridges were installed a few weeks ago and level is higher than 50%

  What procedure I tried, the printer does not print with black more - also not a bit - paper stays white where black ink should be!

  Of course the printer is out of warranty (02-2012), but as I see it, this problem happens a lot on this type of printer - so there is certainly something wrong

  Please HP, it may be that I have to replace my printer after 2 years because he is not black print more or I have to pay more money to fix when I have to pay for a new printer.

  Awaiting your response

  Peter Boermans

  The Netherlands

  Hi Pandabeer,

  I understand your frustration, I see that you have completed all THE procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success, I would like to contact you with our HP technical support. I understand the 6520 PS is longer under warranty but I am confident that they will be able to help you with this problem. You can contact our support at 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• CP2025: Problem of software driver CP2025

  Problem installing software:

  Windows 7 (64 bit) on printer and custom pc worked fine. Installed the free download of Windows 10 and the problem started. SSD formatted and reinstalled Windows 7. Not able to install drivers CP2025, tried both original CD and downloads online.

  They would not install that it either I have tried. HP pilot program informed me that the system was not enough and that he would cease installation. What is extremely strange, given that the same pc was operational with printer and installed software.

  Any ideas?

  Just for starters I say I do assign assumptions when I write this while I am away feel free to ignore what I'm saying. Also your printer can not work properly with WIN 10 to what is a possibility as well.

  I'm willing to bet that the driver you download is a universal driver. Repeatedly universal drivers do not work like a PCL5, PCL6 or PS driver would be. In some cases when you go to the section drivers and downloads for your printer on the HP site, you can change the operating system to the different versions. Then you can possibly download an older version. If they are universals so sometimes you can shoot the pcl5 or 6 driver on the installation of the software they offer or on your cd. Open the archive zip 7 and in some cases, you can find a folder of drivers with the pcl5 or 6 drivers available.

  Perhaps few things to try.

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Problem of black screen of Acer V5 - 572 g

  My acer laptop start go blackscreen right after I turned it

  first of all, the acer logo with a few small balls circulating can be seen

  but after that, the screen went black and showing only the mouse pointer

  I tried to turn on or to turn off several times but nothing hapenned, the same questions keep arising

  any suggestion on what I should do?

  Hello..

  I suggest you check this problem by performing a power reset.

  To perform a reset of the diet:

  1. Unplug the power adapter for your laptop.
  2. Turn the laptop to remove the battery. Turn the computer over and open it.
  3. Press and hold power for 30 seconds, and then release the power button.
  4. Turn the laptop and replace the battery.
  5. Drag to the locking position locking tab.
  6. Turn the laptop again and plug in your power adapter.
  7. Turn on your laptop.

• Unusual problem: partially black screen on the bottom right

  Hi all

  I would like to know what I can do to address these problems:

  I only had my Clip 4 GB zip drive for a month, and today I noticed after that him have plugged for charging for more than a day lower the right hand screen is black. The rest of the screen is fine, it's just this little corner of the screen that is like that! Partially black screen is triangular and always there.

  Another problem I've noticed is that I had it charging for more than a day, I expect to be fully recharged at the time where I unplugged, yet when I watched the news system, he indicated that power was '88% '. And then, when I was checked to make sure it read "77%", then again in '88% ' after I checked it once more. WTH is happening? Why the change?

  Oh, and I think that the firmware is up to date (not sure if this is relevant) because they say "Version: V01.01.20F" in the settings.

  In addition, there is a third question, I believe. I tried to reset by pressing the button of power for 20-30 seconds, but for some reason any, my drive is as insensitive to this, he starts just straight up / stops due to the initial pressure - i.e. function Reset does not work.

  Others that the three above, I have not noticed other unusual symptoms. I would be extremely grateful if anyone could give me any advice to solve this problem.

  Edit - I just noticed that when the drive is connected, he said 100% fully charged, but as soon as I unplug the 88% said

  Thank you.

  I would not be concerned about battery level indicator, as the Zip Clip is infamous for having been innacurate that.  Apparently better, if you want to know the exact charge: go to system info. screen (under system settings) and check the percentage of battery charge it.

  Troubesome more is the screen problem.  If I were you, I would try to manually reapply the latest firmware (see firmware upgrade thread sticky at the top of the forum).  If that doesn't resolve the issues, I would contact the seller and/or the SanDisk for a defective/warranty drive replacement.

  http://www.SanDisk.com/about-SanDisk/contact-us/