Helps the clarification on the ports of the UCS C220

Similar Questions

• Warning of the UCS C220 M3 FlexFlash

  Hello

  We have UCS C220 M3, hosting Unified Communications application CUCM CUC IM & P UCCX.

  In CICM / storage: Cisco FlexFlash appears with a warning "Raid degraded" because there isn't a single card SD provided by default on the server. We have no use of it and it is in "disconnected" State.

  Q: is it possible to disable this warning

  Hi rich,

  You have the operating system installed on the SD card? If you do, you will need to install the second SD card and send the hypervisor partition.  If you do not use the SD card and you want to get rid of this message, you will need to remove the SD card from the server and restart the MMIC (see release notes below).

  Flash controller Flexible Cisco

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/release/notes/OL-28995-01.html

• serial port of the UCS c220

  Someone tried to put the IP address on the serial port MMIC? Thought it would be nice not to have to hang out on the screen and the keyboard, but I can't seem to get the appropriate PIN or and baud rates.

  Sorry Gene, don't know why it gives is right for you.  I shot again today to check, I wasn't crazy, and it is humming along fine on my installation.  Yet once, right rolling cable on the serial port RJ45 in the back (note: not the CIMC/mgmt port, but the port directly adjacent to the VGA port).  I use TeraTerm with parameters:

  

  Here is the result of my terminal, the color is ugly, but does the job:

    

• How can I help the Uzbek language translation of Mozilla FireFox (Web browser)?

  How can I help the Uzbek language translation of Mozilla FireFox (Web browser)?

  Hi Erkin Farxodovich,
  I thank you for volunteering, to do this please contact the l10n team. And also the location on this page Quick Start Guide: https://wiki.mozilla.org/L10n:Starting_a_localization

  That should have all the information. Please reach out to the group mail as well and they can help with questions along the way.

  I hope this helps.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Helps the KB981852 update

  helps the KB981852 update.  the following message was published in regedit: %Windir%\KB981852.log
   
  [KB981852.log]
  8.767: ================================================================================
  8.767: 2010-11-13 22:43:22.430 (local)
  8.767: c:\690c14c58cb8e8f058d1\update\update.exe (version 6.3.13.0)
  8.783: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  8.783: hotfix started with following command line:
  8,845: CheckSystem: main Version mismatch: STATUS_NT_VERSION_MISMATCH
  8,845: DoInstallation: CheckSystem failed: 0xf021
  8,845: the version of Windows you have installed does not match the update you are trying to install.
  14.602: message displayed to the user: the version of Windows you have installed does not match the update you are trying to install.
  14.602: user input: OK
  14.602: Update.exe extended error code = 0xf021
  14.602: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  I am running windows vista with Service Pack 2 installed.

  If you need more info please let me know

  The repeated failures to install KB981852 suggest very strongly that you see the effects of a rootkit infection W32/Alureon-Variant!

  Following the instructions on this site should help you:

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller>

  ~ or ~.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/>

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx>

  For enterprise customers, support for security updates is available through your usual support contacts.

• How to help the user focus

  How to help the user focus

  Magnifier enlarges part of the screen. This is especially useful for viewing objects that are difficult to see. It is also useful for people who are generally difficult to see the screen.

• Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Hello

  Method 1: I suggest you put the computer to boot is a way to determine what's asked the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  A problem with leaks memory occurs in the Audiodg.exe process when you play audio on a computer that is running Windows 7, Windows Server 2008 R2, Windows Vista or Windows Server 2008

  http://support.Microsoft.com/kb/981013

  Important

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• In Muse miniature slideshow container, I have images where data in image properties can be set. SEO search engines see the data and help the visibility of my site?

  In Muse miniature slideshow container, I have images where I can insert the data of image properties. SEO search engines see the data and help the visibility of my site?

  Post edited by: Howard Lower and rewrote the question because I have yet to get a response.

  Yes, they will be included in the report.

  Please check these links:

  https://helpx.Adobe.com/Muse/how-to/add-alt-text-and-ToolTips.html

  https://forums.Adobe.com/thread/1747973?start=0&TSTART=0

  Thank you

  Sanjit

• Help the moderator please

  Help the moderator please delete a post...

  OK, it has now disappeared.

• the UCS blade iscsi initialization cannot install windows server

  Hi all

  I have a problem when I try to install windows server 2008 in the storage of nexenta using iSCSI via ucs b-series, but his works well when I install ESXi 5.5. I can't find disk under windows server installation, and I see all the LUNS in ESXi what im create before nexenta storage and work when I install it.

  This vnic iSCSI Configuration:
  ----------------------------
  vnic_id: 13
  LINK_STATE: to the top

  Initiator Cfg:
  initiator_state: ISCSI_INITIATOR_READY
  initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
  VLAN: 0
  DHCP status: false
  IQN: test: iqn.2014 - 11.com.:8
  IP address: 192.168.1.59
  Subnet mask: 255.255.255.0
  Gateway: 192.168.1.5

  Cfg of target:
  Target the Idx: 0
  State: ISCSI_TARGET_READY
  State of PREV: ISCSI_TARGET_DISABLED
  Target error: ISCSI_TARGET_NO_ERROR
  IQN: iqn.2010 - 08.org.illumos:02:windowsboot
  IP address: 192.168.1.49
  Port: 3260
  Starting logical unit number: 6
  Ping statistics: success (986.646ms)

  Info session:
  session_id: 0
  host_number: 0
  bus_number: 0
  target_id: 0

  can anyone help me to solve this problem?

  Thanks in advance - Fabre

  ENIC / fnic driver must be installed. they are not part of any Windows operating system.

  they can be found in

  Home downloads
  Products
  Servers - unified Computing
  Series B UCS Blade Server Software
   
  Unified Computing System (UCS) Drivers - 2.2 (3)

  ISO image of drivers based on the UCS 
  UCS-bxxx - drivers. 2.2.3.iso

  Depending on the version of the UCS.

• Insertion/thanks to the RAID controller plug in PCIe card in a UCS C220 M3, rather than embeded RAID controller?

  Hello!!

  We have a UCS C220 M3 server with a 1 TB SAS hard drive and a controller RAID embeded, like this:

  1	UCS-HDD1TI2F212	1 TB SAS 7.2 K rpm 3.5 inch HDD/hot plug/disc horse sleigh
  1	UCSC-RAID-ROM15	Embedded SW RAID 0, 1, 10, 5, 4 SAS/SATA ports

  If I add this controller RAID PCI card to my UCS server:

  UCS-RAID-9266CV =

  MegaRAID 9266CV-8i w/TFM + Super CAP

  US $ 1,686.00

  Going to work with her, ignoring the old RAID embeded it configured?

  The question is that VMWARE is not supported controllers shipped my RAID, so I want to add an external RAID PCI controller to support VMWARE.

  I don't know if it will work.

  Thank you!!

  Rodrigo,

  The embeded controller is built and not removable, it is integrated into each C220/C240. The units are designed to operate with PCIe controllers and mezzanine table when it is properly configured.

  Once you install the controller of the SIPC, you will need to do the following:

  (1) move the conectors mini SAS to the motherboard in the LSI PCIe controller

  (2) make sure that the slot PCIe what optionrom is enabled in the BIOS. (newer systems have their OptionROM disabled in the uninhabited slots (from the factory). If you do not see the OptionROM for the POST, then go back into the BIOS and enable the slot PCIe OptionROM

  (3) while you are in the BIOS, you can thus turn off Patsburg UCS regulatory table (the table embeded). It is of no use at this stage that you removed the cables up to the HARD drive Bay. It is also misleading if left active, you will see the configuration of arrays of LSI utility appear twice during POST. Time for the embeded and once again for the PCIe LSI controller.

  Dave

• Cannot save the UCS of CLI field

  Hello

  Connected in the UCS by CLI Manager.

  Try to run the command to register the domain UCS UCS central.

  SSH in the UCS CLI Manager, I run the reach system which brings me to regroup name\system #.

  When I try to use the command create ip_address political control-ep.  I get an invalie error marker

  If I do a creation? I do not get an option to create a policy of control of the EP

  Any help would be great.

  Thank you

  Hello

  What UCSM version are you running?  It looks like you can have a version prior to 2.1, who does not have the ability to integrate into the power plant of the UCS.

• Manager of the UCS of 1.2 update (1 d) to 1.3 (1o)

  I use the instructions in the UCSM_GUI_Configuration_Guide_1_3_1.pdf to upgrade my equipment ucs.  There are several questions and I had.

  (1) it says to update the firmware for the IOM and wait until you activate the firmware on the fabric of interconnections that will restart the interconnection fabric and IOM, date on which IOM will be updated.  I did the firmware was not updated on IOM.  The backup version still shows 1.3 (1o) and the current version is 1.3 (1 c) IOM for, even if the fabric of interconnections successfully updated.  When I try to manually activate the firmware on the IOM, I get error combined modification.  The compatibility check failed. What is this?

  (2) I have treid activating the UCS Manager according to page 141 of the guide of version 1.2 (1 d) 1.3 (1o) and I find failed to start activation.  The check of the compatibiity failed. 

  (3) I tried to update the individual servers of 1.2 interface cards (1 d) to 1.3 (1o) and I will meet with the same errors of compatibility check.

  This is the first time I went through and tried to update the firmware on my new box of UCS.  Any help would be appreciated.

  Thank you

  During the activation of the new firmware, you must check the box to ignore the compatibility check.