Helps the public service (addchild object of other public access)

Similar Questions

• public page is not available to the public - access instead of the error.

  I have a work request. actually, I have the same copy of the work plan WITH SSO application and the other using the scheme of authentication and authorization of apex. Both work very well. With the exception of the logout page. I create a page(#62), without tab. Just a simple HTML form that has a disconnect message. I do the authentication of the page the value "Page is public" and save. I did this (try to diag) in two of these applications and in 2 different installations of the apex.
  
  However, when I'm not connected in the app, and I'm on this page, I get an "error: access denied by Application security control" message.
  
  I'm just trying to go to the URL http://xxxxxxx:8090/apex/f direct? p = 110:62:0:, or just http://xxxxxxx:8090/apex/f? p = 110:62 (page 62 is the page I created and defined as public.)
  
  It is in the apex 4.1.1. I think it should be very obvious as to why it does not, however, I'm puzzled.
  
  Thanks in advance.

  Hey 12602240 - the problem I think you touch is not at the level of the page but on your level of app. If you go to the properties of the application, it seems that you have a system of authorisation required at the level of the app. If the page you are trying to do is after they log out, you may need to allow ANYONE to access your application to get the public pages (or take off clearance at the level of the app).

  Rgds/Mark M.

• The Customer Service of group policy has denied access problem

  After the execution of a routine Windows Update as I always do, I was asked to restart my HP laptop (running than Home Premium 32-bit Vista). The only other thing I had opened was a radio station playing music from the internet. I didn't close anything before restarting as I thought he would close himself. So I just rebooted. Like the reboot process that was going on, I noticed that my laptop came into DOS mode and all kinds of lines of text have been created and saved, but I assumed it was part of the updates. However, when I went to reconnect, I was greeted by the following: group access policy Customer Service refused.

  Much I read on the forum and heard that this problem occurs for many. What I read, it seems to have nothing to do with the specific update or that they were installing the software, but everything to do with the user account?

  I had only one account configured, so I was forced to restart in safe mode in order to create a new account. But when I created this new account, it does not appear in the c:\Users[user-name]\Music\iTunes\iTunes. All my user account is a folder owner and a Public folder, and no record has my user names listed in their breast. So I couldn't copy the files from my old username to my new.

  I tried to restore my computer to a different date, but unfortunately, I had too many things on the laptop to create a backup file on the D drive, I never did. I know, stupid me!

  I also tried looking up 'services' in the help section and then scroll to find "group policy client" and that there is nothing listed at close distance from that.

  I've seen a lot of these posts dating from 2008, 2010 and 2011, and I tried just about every does not.

  Can someone help me please? I use this laptop for my home based business and my Quickbooks is. I depend greatly on this laptop, and I need to work again for me!

  Darlene

  Hello DarleneR,

  Thanks for the return of the response.  You have attemtped to enter your boot options and try last known good configuration?   You have a Setup disk for your version of Windows Vista?

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Please let us know status.

• If I put the bridge on a shared server other computers access to this without going through bridge themselves?

  We have a shared server at work that I would like to download all photos - preferably using bridge - work so that everyone connected to this server can access/modify them remotely. All these computers should bridge or can it work just from the shared server?

  Bridge and servers may work, but think we need bridge on each computer, but then my knowledge of servers is zip.

  Bridge is not a good choice for a server, it will work, but it is not a digital asset manager.  You can look in a dam, Cantos Cumulus is a name that comes up frequently, and that works well.

• Error in creation of Control (SOAP) data to the Web Service in the ADF Mobile app

  Hi, I tried to create a Control (SOAP) Web Service data in a Mobile application of ADF in JDeveloper 11.1.2.4.0 under Mac OS X 10.8.5

  The application has been newly created (no features) and I tried to create a Web Service data control directly.

  In the 'Create Web Service data-> step 1 control', when I entered the URL of the WSDL and left the text box, the window "WSDL Document for reading" came and I got an error message saying "invalid WSDL URL.

  The error description is given below:

  Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is DCA-29000. Are parameters of error message ({0 = oracle.webservices.mdds.MddsException, 1 = java.io.InterruptedIOException: connection timed out})

  I have JDeveloper put 11.1.2.4.0 in place on a Windows 8 and follow the same steps with the same WSDL URL and he accepted the URL.

  Can anyone help on how to fix this problem as I want to develop on Mac.

  Hello

  We have solved the problem by asking the dev team to provide the file for the web service's .wsdl. We copied the file in the file system on the mac and then instead of provide the URL, inviting us to the wsdl file. Who does the work on the mac.

  We were able to put a URL as http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL (a non-secure web service) and the wizard to create the Web Service data control accepted the URL on the mac. Can be to secure web services, we have the .wsdl himself file. (the web service that we were trying to access was on EBS and was a secure web service)

• install the Telnet Service for remote access

  How do we install the telnet service on my pc I can access the pc from anywhere under the same gateway.

  Reach

  beginning

  Run

  Type "services.msc".

  find and start the telnet service, and set the startup type to automatic

  Now you set any password for your administrator account?

  If not now

  go to my computer > right click > manage

  find user and group > select Administrator > right click > set password

  now go into firewall of network properties, made setting a right click on the network adapter Firewall setting and allow the exception to add 23 like telnet port name

  and you're done

  Restart your system

  Hope this work

  Best regards and good luck

  Sohail Khan

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• Public access - what it really means?

  For the hive online and the box that you can check that the Public Access workspace:
  Make this public space so that non-participants can read, comment and discuss
  Note: If Public access is enabled, this space will be accessible to non-participants via a URL for the workspace.
  
  Who really has access? Is this someone you share a url from this workspace with? Or users must be registered with Oracle through OPN login (partners) or https://myprofile.oracle.com? Or is it limited to those actually registered and verified on the hive online (all groups)?
  
  I can't seem to find any info on nowhere, and the help text is not accurate enough for me.
  
  Thank you.

  Hello

  With your questions:

  Who really has access?

  Any user CONNECTED IN of BeehiveOnline will have access to the workspace - IF we give them the url to access - the directory can go into research as well but normally you set this indicator, and then send the Url for the workspace for users you want to access.

  Is this someone you share a url from this workspace with?

  Yes, as long as they have a connection to the system, they will be able to access the workspace.

  Or users must be registered with Oracle through OPN login (partners) or https://myprofile.oracle.com?

  To obtain a login to Beehiveonline, they need saving, i.e. via https://myprofile.oracle.com or already have a login OPN (partners)

  Or is it limited to those actually registered and verified on the hive online (all groups)?

  Yes, it is limited to those who can connect as long as user to BeehiveOnline - the Public is coverage restricted, limited to those who have valid accounts...

  Phil

• Requested help recovering from the change that I did for the 'Public' of Vista Home Premium file permissions for everyone

  I made a blunder when changing the permissions of public folders for everyone.  I am now connected to Vista Home Premium on my home PC as an Admin will be complete permissiongs.  When I right click on the folder Public, pooling and property options are both now gone.  How to restore the availability of these options?  Also, I can access to is no longer the files that I previously copied into the Public folder.  How can I restore my access to these files?

  Have you started with elevated privileges command prompt? Just running in the administrator account is not enough. Looks like you don't have because it starts in your user directory. If you were high would begin in the Windows\System32 directory.

  See: http://windows.microsoft.com/en-US/windows-vista/Command-Prompt-frequently-asked-questions

  Orders, you should get something like this:

  Takeown /f /a C:\Users\Public
  ICACLS C:\Users\Public/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public/Grant "Administrators: (F)".
  Takeown /f C:\Users\Public\*/a
  ICACLS C:\Users\Public\*.*/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public\*.*/Grant "Administrators: (F)".

  I can't guarantee that this will fix your system. You must give permissions for the system and other users accounts.  If you have access to another system, I would compare the settings there. These programs will help you determine the permissions associated with a system

  • AccessChk http://technet.microsoft.com/en-us/sysinternals/bb664922
  • AccessEnum http://technet.microsoft.com/en-us/sysinternals/bb897332

• I need the customer service who can help.

  I have Photoshop CS5, a legal copy I bought a few years ago, I can not install the program on my computer because she wants me still pay for it.  I need help from customer service, but I'm redirected to a forum.  Very frustrating.

  To reinstall you need several things

  (1) your serial number more support containing the program.

  (2) the serial number of CS4 if your copy of CS5 was a upgrade

  (3) to have no activation exceptional on some other component computers software snap-in which case Adobe can reset your counter.

  Click on the link below and at the bottom, click on the chat applet. Someone from Adobe will help you then.

  Contact the customer service

• How to get the XML from the Request of Java object before sending. SOAP Web services

  I'm building Java request to Online Web Services and we'll call it application A . I got the WSDL forms the second part of the file in order to communicate with their application and we'll call it application B .

  Of the WSDL file generate the Java required classes that are Requests and Responses . classes Application A will send some request object after setting the parameters required and with the exception of response object of application B .

  The connection is established and the two applications A and B communicate with each other.

  Question:

  Of application A How can I get the xml data (or text file) for the request object before sending it to application B ?

  As described the connection is passing Java object such as request and I know that in some point this request will be converted to xml file. How to get it?

  -EDIT-

  Missing important information which can be confusing.

  I'm generated the Java rating were generated using the Axis framework

  The problem is solved by, add the following statements in the bindingStub class that was automatically generated from the WSDL file to the web-services you are trying to access.

     String request = _call.getMessageContext().getRequestMessage().getSOAPPartAsString(); 
   String response = _call.getMessageContext().getResponseMessage().getSOAPPartAsString();
  

  These statements should be placed after the following method call _call.invoke otherwise you will get NullPointerException .

  _callis a variable of type org.apache.axis.client.Cal and it is automatically generated byAxis

• Duration of the apex - can we have access to the "Public Services" link Avaialbe in IDE

  Currently using Apex 3.2-11 GR 2

  The Production Server has only "Apex RUNTIME". All developer access is not allowed.

  But the requirement is a Manager to open a session in the IDE of the Apex and click "Utilities" and click reports Apex in the only case of "Apex runtime" on production. This is necessary for the Manager to see and monitor due to security requirements.

  The "Utilities" option is available during the installation of the apex is "runtime" only mode? Whatever it is dynamically switchable to a specific user connection to allow them to access these reports of object? Other suggestions on how these reports are available directly outside the Apex would also help.

  Thank you!

  citing the book Oracle Application Express 3.2

  When the APEX is first installed, we can choose whether to install the APEX or APEX Runtime Environment complete development environment. This can be changed later by running the SQL scripts provided with the installation of the APEX. We can convert from a development environment complete APEX for an APEX runtime environment by running script SQL apxdevrm.sql that helps the user SYS with SYSDBA role. We can also convert a runtime environment to a full development environment by running SQL apxdvins.sqlscript. Conversion of the environment leave our unchanged applications, and they can be run using the same exact URL.

  Thank you

  Tony Miller

  Software LuvMuffin

• How to access the values of the object View Other or objects entities

  HelloW.
  I need help, I have the validation of the IUCN IUCN impl methods, I need to access the values of other objects in view o entities to validate.
  How do I?
  Help, please

  Go you to other entities via binding accessors when entities you will access are related by an association. Otherwise to access other objects in the view definition of your needs through accessors from view in the connected user reviews section.

  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcentities.htm#insertedID12

• How to disable location under the privacy services? My switch is freezed help kindly

  How to disable location under the privacy services? My switch is freezed help kindly

  Try disabling "Find my iPhone" in iCloud settings first.

• My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  Omegamax,

  Have you tried spotlight?