A300D-14 t modem problem

Similar Questions

• Satellite L300 - 1 year PSLBGE - device Modem problem

  Hey

  I try me set up my dial-up access, so I can use internet at home...
  It is said that any modem devices are
  but in the previous copy of windows that I had... everything was fine.
  would u please help me solve this problem?

  Portable computer system unit Toshiba satellite L300 1 year
  Model No.: PSLBGE-002004AR
  OS: Windows XP
  Note: I went on the site of toshiba drivers and I downloaded 3 files of modems here to try to update the modem driver
  but nothing helps and the problem persists
  Thanks for reading
  Your
  ~ Nour

  I guess that you have activated the Device Manager and there is no yellow exclamation point isn't good?
  Figure modem in the list?
  It should be!

  How have you tried to configure the dial-up access?
  You should do this;
  Go to the category modems Options - Control Panel - hardware and sound - and.
  In the local info window, select an area code; for example, 0.
  Then click the Modems tab, click Add.
  If a User Account Control warning window appears, click on continue, and then click Next.
  Now Windows Vista should attempt to detect the modem.
  When the modem installation is complete, click Finish.

  Then the new modem installed should appear. Click OK to close the Options of Modem and telephony.
  Now, your modem is installed correctly, and you must now create a modem connection.

• Re: Equium A300D - 13 X - boot problem

  Hello

  I can't initialize problem. Powers of phone on ok, with a few flashes of HARD drive as it tries to start. But no sounds other than the kick, fans have tried all the usual things like FN/F8 to enter safe mode, also cold start battery and network opens. Power button down for an all black screen minute etc etc, but still no screen or emits a signal. I suspect a power supply problem and have tried with different loader but no effect. Laptop is a 4 year old Toshiba Equium A300D - 13 X everything worked fine but I recently renewed keyboard, screen bezel, Mo media Ribbon, power/Ribbon button, Mo.

  I thought I might have left some cable detached so all reopened and checked, but everything is correctly fixed I think.

  Any help would be greatly appreciated.

  Thanks Bob.

  Hello Bob

  It is not easy to be objective with this problem. On one side you have disassembled your laptop on your own and we don t know if everything was done correctly. I m also not technician and each laptop disassembly has been a success.

  I put t really know what to say. Try to talk with someone who can help you with this and check if everything is OK. Small error as causing electrical circuit can damage the electrical components of the motherboard. Try to check the display cable connection.

  Have you tried to connect the laptop to the TV and check if all come to this?

• Satellite Pro M30 modem problem

  I have a portable Satellite Pro M30 and I try to install the modem driver. Everything is ok, but the modem has problem. In Device Manager, it seems to be fine without conflicts. Each time than trying to query the modem of the property page, it shows me a message concerning the opening of port.

  I read a lot of articles and I thing the problem, this is the version of the driver. The driver that I use is the SM2138ALD04 version. Have any ideas?

  Hello

  I agree with you, I found also several threads to have reported similar problems with modems
  No doubt this procedure will help you:

  -go to the Device Manager and remove and uninstall the modem driver
  -Download the latest modem driver
  -restart the OS and reinstall the modem

  Please report did it

• Installation of modem problem!

  Hello

  I reinstall new OS, when I try to install a modem with the last pilot devices returned with error (yellow mark).
  I read in the forum and knowledge of the internet. The problem is a regfile, this file is located in the cd driver sound tools.
  I wait in a directory on the cd, but I can't find it.
  Can someone help my!

  Hello

  It would be easier for the community to know what laptop you have? What old and new operating system you have?

  Where is the driver for the Modem of Toshiba Homepage or Tools & Utilities CD?

  :-)

  Bye Bob

• Port COM3 modem problem

  Hello
  I can't establish a connection dial-up on my laptop, I try to connect to the internet modem cannot dial because port COM3 seems closed.
  It's a software modem internal Toshiba do.
  Modem appeas to work properly, I checked with Device Manager.When try to query the modem, it pops up a message:

  "the port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. »

  Well, I did this and the rest of the devices seem to be ok.
  Then I reinstalled the driver for the modem, but it did not help.
  I reformatted the pc but still nothing.

  Please could you suggest something that might help me to solve it?

  Thank you very much!

  Emil.

  Hello

  You may have a chance with the Prot 4 and check the properties of the Modem.

  Go to Device Manager, the modem properties. To access settings, click on advanced and together the Com of Com4 settings.

  Go to the Standard settings, control pedal and check the settings (the material is correct).

  Check the option by the application of the device, if the device is turned on?
  Control that energy management is the device of the computer in the active settlement of Modus.

  Check the IRQ of the device (IRQ20) under appeal

  Run the registry:

  Go in HKey Local Machine/Software/Microsoft/RAS/Tapi devices / Uni Modem
  And check under the address, the number of Prot.

  I hope this is a help to your problem.

  By

• Satellite A30 - Modem problem

  I rebuilt my A30. I reinstalled the modem drivers from the CD-ROM supplied with the computer. I use XP Pro. However, I get the following message: 21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - file: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
  21/12/2005 23:24:47.890 - Modem type: TOSHIBA software Modem
  2005-12-21 23:24:47.890 - the Modem inf path: oem7.inf
  21/12/2005 23:24:47.890 - Modem inf section: ATI_AMR. Modem
  21/12/2005 23:24:47.890 - matching hardware ID: pci\ven_1002 & dev_434d & subsys_00011179
  23:24:47.968 21/12/2005 - opening the modem device failed with error 000005aa

  Any help would be appreciated

  Hello

  Where did you get this message?
  Have you checked the Device Manager? You see errors like yellow exclamation?
  Please post more information about this problem

  Good bye

• Satellite 1800 - modem problem

  I have a dial connection whenever I try to connect to the internet, I get an error message saying that the remote computer has failed.

  I XP MS and connection to the internet has always been a bit hit and Miss. Impossible with aol, fine with BT I now live somewhere with blue cable installed there and have had problems since.

  I tried a virus with a startup disk check - nothing. I uninstalled the driver and reinstalled the latest version. I'm trying to get hold of an external modem to check if my modem. I don't really know about these things, but certainly a modem no longer works or it's not - there is not between the two? After you have reinstalled the driver that I managed to connect, but has been disconnected aftre about 20 minutes and have not been able to connect from. I'm out of ideas. Can anyone help?

  Thank you in advance.

  Hello Madeline

  As you know, it is not easy to give you all the help on this path. First of all it is important to make sure that your modem is operational. Your ad the modem functionality is not connection just problem to your ISP (Internet Service Provider).
  Am I wrong?

  Can you please test your modem and check the results. You will find in the properties of the modem under Diagnostics.
  The only thing I can recommend is to remove the modem from Device Manager and dial-up connection. Restart the device and the modem will be detected again. Create the new connection dial-up and pay attention to all parameters.

• Modem problem: "no dial tone".

  Hi all

  Can someone explain how to get my email from my lap top messages when away on holiday (in the United Kingdom)? At home I'm on freeserve hometime - evenings and week ends option. While he died this week, I tried to connect through aol broadband, when it obviously failed I have not connected to the telephone without broadband dsl thingy, I always get the error message 'no dial tone '. If anyone has had this problem and you solve?
  Thanks, Jackie

  Sorry, but I can´t follow you! ;(

  Want to know if you can take your vacation mail, for example in Webmail or something else.

  Or do you have the probs to get your Modem running?

• A30 modem problem

  Hi, I can not install xp driver of modem to my computer. It does not accept driver xp so I installed driver win2000, but now there is an error: modem does not answer. In Device Manager, but no problem... What can I do?

  Check the settings of the modem - it probably should be for the Tosh software modem, not the material or the IR. Also, make sure that it is configured to receive. With my old computer, I could not put to send * and * receive, should therefore continue to change the settings via the control panel.

• OfficeConnect router modem problem

  My problem with this model of modem (3CRWDR101A-75) when I connect any device via wireless it works ok whie the wireless is swiched off, when I swich on wireless only wireless devices, get the internet connection and cable devices is not internect connection... Two days ago I updated the firmware to the last and re-front again, but the problem is still preset. An advise please?

  First of all thank you for your (late) response. I already got a new as follows

  Linksys X 1000

  

• Satellite A300D-11 q battery problem

  Hello!

  I was on the point of start almost the same topic, when I saw there was very similar question several hours - [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61884&tstart=0]. Yet, I decided to share my problem.

  I have the Satellite A300D-11 q PA3534U-1BRS 4000 mAh battery and 10.8 V.
  The difference in my case is that I bought a new battery, PA3533U-1BRS, 7200 mAh, 10.8V, but a third-party manufacturer.
  Before that, I was told by the official service of Toshiba PA3533U-1BRS is compatible with my computer. Of course, this trusted third party (Brainydeal, a U.S.-based company., but the battery is made in China, by AGPTEK). It was pretty tempting as the price was half that quoted by Toshiba for a 6000 one mAh. And there were 16/16 sides of 5 stars on Amazon for the same battery.

  So, the problem. I had very similar flashing red LED, but nevertheless the battery could be charged and was able to power the laptop for about 2 hours. However, the computer could not get information nor on the level of load (and therefore couldn't not to assess what is the period of hibernation, so was suddenly stopped), voltage, or manufacturer.

  And the model seems to be PA3593U-1BRS depending on the software (Lavalys Everest and also BatteryMon).
  I've had a few matches clumsy with Brainydeal where they assured me that the battery is high quality and all going well, 3593 is compatible with my laptop model.

  Finally, I returned it to the manufacturer for replacement, and yesterday, I received a new. However, the same is happening again.
  Exactly the same thing.

  Before writing back to the manufacturer, I decided to check here for review.
  May be the battery Electronics is a failure?
  Or could it be somehow related to the fact that the computer is purchased the battery - of the USA and Europe? Or I just had very bad luck?

  Post edited by: marchemence

  Just one question: the old battery is working correctly?
  I mean do a blink led using the old battery or only the new battery?

  I read in some discussions that last BIOS should be used for series Satellite A300 to solve some problems of battery.

  Please check if you are using the latest version of the BIOS!

• A60-302 Sound and Modem problems after wake up

  I use a laptop A60-302 with Greek WinXP.
  My problem is that after always and sometimes even sleep
  After the start, the sound card is dead and I have to restart to hear something. The same thing happens with the Toshiba Modem.I did the last update for the sound card drivers, but it does not help! What can I do to alleviate this problem?

  Hello

  You can try to update the Toshiba Power Saver or power management because they are responsible for the day before!

  I got an A50 and use put to sleep / hibernation every time without problems!

  When he runs in the past, you can also try to use the Windows XP system restore! It redefines the laptop to set restore points!

  Rudi

• Satellite A300D - creating recovery disk problem

  Hello.

  I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
  I tried to run Program Files.

  Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
  Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

  For memory - recovery partition exists and has not been changed.

  System - Vista Home Premium 32 bit.
  What should do?

  Hello

  I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

  Maybe not a very elegant solution but the only one that works every time.

  Welcome them

• Satellite L505 - Installation of Modem problem

  Hi friends

  I just got all new laptop Toshiba L505 which was preloaded with Vista Home Premium. I formatted the hard drive and installed Vista professional authentic
  about it because of some of my requirements. I downloaded all the necessary drivers from Toshiba Web site. The problem is that I can't install the modem correctly. During the installation of the modem, it gives this error: * "failure of the driver Installation: could not find the MODEM device for this driver." * I tried of the UAA, but of no use. I reinstalled the sound drivers but no use. Help, please. I am in a big trouble.

  Thank you

  ManInTrouble

  At first say us please do you use drivers from Toshiba support page right. I assume you have phone US.
  Do you use the Toshiba U.S. support page to download the drivers?