HEXAGONAL problem

Hi again,

I could really do with some help regarding sending the commands by using the code display string.

Basically, I need to send a string of HEX 02 08 00 00 00 20 00 03 xx xx to device bluetooth as a command.

The xx represents the changing data Hexagon I send.

The problem I have is that I can send the command no problem in writing a complete chain and using the-screen entry code: \02\08\00\xx\xx\00\00\20\00\03 and it has the required effect.

When I send the concatenated string even I have problems... \02\08\00 1st set 2nd set is my 3rd set of data is \00\00\\20\00\03, but I do not get a display output code that I need, I you \02\b\009624\00\00\s\00\03

I'm sorry if this doesn't make much sense, but in my head, I think it's ok!

Thank you very much

Alex

Tags: NI Software

Similar Questions

Cannot display the hexagonal board in .uri textbox

I send a hex on RS - 232 frame, I managed send/recieve char string my uri but the problem is that textbox displays only the characters so by GetCtrlVal or SetCtrlVal, I can only get and set characters but unfortunately I am unable to do the same thing with Formate of Hex data, for example I want to send a hexagonal 20 0xAA table , 0xAB, 0 x 10, 0 00, 0xAE, 0xFF, SSO WHEN I ATTRIBUTE such table textbox I see different forms but not my data hexadecimal, I used other tools to varify my data is correct but unfortunately Lab Windows is unable to help me with this, converting the whole range of 20 to a string and then the display is also another option but I am stll unable to do.

Please help me, looking forward to your response,.

concerning

Arfaoui

(1) SetCtrlVal is not the right way to approach the table controls. The values must be inserted into table cells, not in the table itself. The appropriate command is SetTableCellValor SetTableCellRangeVals if you can organize your data in a digital picture. I suggest that you take a look at tablecells.prj example to understand how to manipulate the table. The example is in the \userint folder; you can locate it with the example finder (help > find... examples of menu)

(2) user interface timers are managed by the UI thread: they can be influenced by all and every event in this thread. What you observe is normal behavior for standard timer UI events; worst case you Heve not observed so far is that if you click and drag a window UI timers are fixed all the time that you press the mouse button! A simple alternative to the UI timers are asynchronous timers , they are treated in a separate thread. Refer to the documentation I linked and examples that you can find with the finder example

rs232 USB problem

Hello world

I've been in vain looking for a solution to a problem that I seem to have with standard equipment communication using a converter USB to rs232.

I'm using Labview 2013 on a windows 7 computer and using a converter using the FTDI chip. My computer recognizese converter and NOR-MAX recognizes as ASRL7::INSTR that I named "pc830." I've attached a screenshot of my VI.

I am tempted to write a command in a pc830 (p) 169 170 order of read/write ASCII) asking a piston position data. The problem I encounter is that, while I can send a command, I'm not receiving all data during the reading of my program and my connection time part (error-1073807339 occurred to read in PC830PosVelExtractor.vi VISA, VISA: (Hex 0xBFFF0015) timeout expired before the operation ended.).

The first and obvious questions are if the serial port settings I use are correct. I'm essentially rewriting of a previous Labview program that allow to control this piston even. I took (and verified) that these are the correct values (baud rate, stop bit, etc.). In addition, this old program sending the \02255\sR\s10034:96\r message takes up a replica of the equipment of series with the position data (for example \02V26057:148\r). I checked that the hexagonal version of the message sent by my new program is the same as the old.

Now, to check that the USB cable works in fact, I did a loopback test by opening a window to test VISA. In this regard, bypassing the cable in a rs232 configuration, I'm able to successfully send and receive this same order of \02255\sR\s10034:96\r. I got a timeout issue before, however, I activated the terminal character, and he went. The message is sent and received without problem.

Back to my program, I activated the same way the terminal character (\r) from the serial port hoping to get rid of the question. When it is connected to my standard equipment, I always get the question of timeout during playback. However, if I short the cable once again in a rs232 loopback configuration, I can send and receive my \02255\sR\s10034:96\r message without problem.

I actually connected the old and the new program the cable just to see that I could talk with other devices. It works very well, and I may as well read and write in both directions of each programs.

My last attempt to diagnose/difficulty of the question was to add a "hunt read buffer" just before you perform the write operation. It didn't matter, because as far as I know.

I would like to hear from someone with suggestions that I am just about ideas at this stage. We have no space to add a serial port of the computer, and converters with FTDI chips reviews seem to be good. How can I get this thing to talk!

From two hexagonal numbers as a variable byte in dll calls

I imported a DLL, which works well when it was called by C++ codes. However, a few screws converted did not work properly. The original functions were supposed to write a set of two hexadecimal numbers (one byte in size) to an address specified in the form of two characters. Somehow after these functions have been converted to screw, they wrote the first hexagonal number and ignore the rest. My speculation is that, given that this variable is declared as a type byte, the VIs may only take the first hexadecimal digit as a character (also a byte in size) and ignored the following hexadecimal number. Has anyone ran into similar problems?

Configure the setting in COLD LAKE to be a U8 integer instead of a string.

Problem with the treatment of the communication data series

I'm working on the communication between LabVIEW and my PIC Microcontroller UART. It works quite well with character Txn & Rxn.But I am facing problems in transmiting and receiving the hexadecimal numbers. through this interface. First of all, is possible to transmit & receive these numbers without ASCII to character conversion & vice versa? and is there an effective technique to deal with our hexagonal. written in the controls of the channel for transmission?

Hi all

Thanks for the reply... I tried the things you all suggested and eventually got in the way to communicate with our hexagonal... .. More information can be obtained at:

http://digital.NI.com/public.nsf/allkb/6C24F2F07BC23BB78625722800710865

Size leader WORDPAD (rtf) - double with each re - open (adds 1000 '5 c' hexagonal tank-s)?

WORDPAD (rtf) file size increases with each open/save (by adding 1000 '5 c' hexagonal tank-s)?
I had this problem with XP, Vista & win 7-5 last year.

Use a HEX Editor to remove the "5 c-string" and file seem well for awhile.
Problem occurs again in a few months.
For each new year, I am starting a new WORDPAD-rtf file and months later get problem
again. Once I noticed that the size is accompanied by I use HxD to remove
the great chain of "5C5C5C5C5C5C" - and rear works fine.

Why the "5C5C5C5C5C5C" - string added to the file?

There are quite a few references to this on the net. Seems to be something to do with the metadata that are added each time.

Why you use Wordpad if it gives you grief? Why not use Word?

Photosmart 7520: cartridge printer problem

There are 5 locations of the cartridge in the printer, and I never had no problem with cartridges before that. Four of the five slots hold what I describe as 'slim' cartridges - 3 color, black. The fifth housing contains a cartridge slightly wide, black - 564/XL with an icon that looks like a hexagon. I put all the cartridges match to their icons. The combo or one package of 564/564XL I bought do not contain the black cartridge "slim." Icon on it looks like the 'open doors' on a lift - in opposing arrows. 564/XL certainly does not fit the slot (position left-most). So while 4 out of the 5 was inserted and "snicked" well put, I get the message 'lack cartridge' and I get this - I am missing a cartridge! I'll go back to the store and ask for help, but what don't get me? I bought the combo packs before and got just what I needed.

Hi @JMA1961,

Welcome to the Forums of HP Support!

I understand that you did not correct black cartridge in the pack that you bought. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

I understand how frustrating it must before you. To clarify, it depends on where you buy the combo pack, if she would have the black cartridge include. Please check the box for more details.

NOTE: Depends on the retail store, whether or not it would be included.
- The cartridge that described you as "open doors on a lift" is the black photo cartridge, which has the symbol bowtie on him. This cartridge can only fit on the side of the extreme left of the printhead.
- The cartridge on the right side is the main black cartridge that has the shape of a Pentagon on the subject. This cartridge only fits on the far right of the print head.

Problem Cisco 2811 with L2TP IPsec VPN

Hello. Sorry for my English. Help me please. I have problem with L2TP over IPsec VPN when I connect with Android phones. Even if I connect with laptop computers. I have Cisco 2811 - Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (2) T2, (fc3) SOFTWARE VERSION. I configured on L2TP over IPsec VPN with Radius Authentication

My config:

!
AAA new-model
!
!
AAA authentication login default local
Ray of AAA for authentication ppp default local group
AAA authorization network default authenticated if
start-stop radius group AAA accounting network L2TP_RADIUS

!
dhcp L2tp IP pool
network 192.168.100.0 255.255.255.0
default router 192.168.100.1
domain.local domain name
192.168.101.12 DNS server
18c0.a865.c0a8.6401 hexagonal option 121
18c0.a865.c0a8.6401 hexagonal option 249

VPDN enable
!
VPDN-group sec_groupe
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
no authentication of l2tp tunnel

session of crypto consignment
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 55
BA 3des
md5 hash
preshared authentication
Group 2

ISAKMP crypto key... address 0.0.0.0 0.0.0.0
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 10 periodicals
!
life crypto ipsec security association seconds 28000
!
Crypto ipsec transform-set esp-3des esp-sha-hmac L2TP
transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DESMD5
need transport mode
!

!
!
crypto dynamic-map DYN - map 10
Set nat demux
game of transformation-L2TP
!
!
Crypto map 10 L2TP-VPN ipsec-isakmp dynamic DYN-map

interface Loopback1
Description * L2TP GateWay *.
IP 192.168.100.1 address 255.255.255.255

interface FastEthernet0/0
Description * Internet *.
address IP 95.6... 255.255.255.248
IP access-group allow-in-of-wan in
IP access-group allows-off-of-wan on
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
IP route cache policy
automatic duplex
automatic speed
L2TP-VPN crypto card
!

interface virtual-Template1
Description * PPTP *.
IP unnumbered Loopback1
IP access-group L2TP_VPN_IN in
AutoDetect encapsulation ppp
default IP address dhcp-pool L2tp peer
No keepalive
PPP mtu Adaptive
PPP encryption mppe auto
PPP authentication ms-chap-v2 callin
PPP accounting L2TP_RADIUS

L2TP_VPN_IN extended IP access list
permit any any icmp echo
IP 192.168.100.0 allow 0.0.0.255 192.168.101.0 0.0.0.255
IP 192.168.100.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
allow udp any any eq bootps
allow udp any any eq bootpc
deny ip any any journal entry

RADIUS-server host 192.168.101.15 auth-port 1812 acct-port 1813
RADIUS server retry method reorganize
RADIUS server retransmit 2
Server RADIUS 7 key...

Debugging shows me

234195: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet dport 500 sport 500 SA NEW Global (N)
234196: * 3 Feb 18:53:38: ISAKMP: created a struct peer 93.73.161.229, peer port 500
234197: * 3 Feb 18:53:38: ISAKMP: new position created post = 0x47D305BC peer_handle = 0x80007C5F
234198: * 3 Feb 18:53:38: ISAKMP: lock struct 0x47D305BC, refcount 1 to peer crypto_isakmp_process_block
234199: * 3 Feb 18:53:38: ISAKMP: 500 local port, remote port 500
234200: * 3 Feb 18:53:38: insert his with his 480CFF64 = success
234201: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234202: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
234203: * 3 Feb 18:53:38: ISAKMP: (0): treatment ITS payload. Message ID = 0
234204: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234205: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234206: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234207: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234208: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234209: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234210: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234211: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234212: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234213: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234214: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234215: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234216: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234217: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234218: * 3 Feb 18:53:38: ISAKMP: (0): success
234219: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234220: * 3 Feb 18:53:38: ISAKMP: (0): pre-shared key local found
234221: * 3 Feb 18:53:38: ISAKMP: analysis of the profiles for xauth...
234222: * 3 Feb 18:53:38: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
234223: * 3 Feb 18:53:38: ISAKMP: type of life in seconds
234224: * 3 Feb 18:53:38: ISAKMP: life (basic) of 28800
234225: * 3 Feb 18:53:38: ISAKMP: 3DES-CBC encryption
234226: * 3 Feb 18:53:38: ISAKMP: pre-shared key auth
234227: * 3 Feb 18:53:38: ISAKMP: SHA hash
234228: * 3 Feb 18:53:38: ISAKMP: group by default 2
234229: * 3 Feb 18:53:38: ISAKMP: (0): atts are acceptable. Next payload is 3
234230: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234231: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234232: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234233: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234234: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234235: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234236: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234237: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234238: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234239: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234240: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234241: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234242: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234243: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234244: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1

234245: * 3 Feb 18:53:38: ISAKMP: (0): built the seller-02 ID NAT - t
234246: * 3 Feb 18:53:38: ISAKMP: (0): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
234247: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234248: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2

234249: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet 500 Global 500 (R) sport dport MM_SA_SETUP
234250: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234251: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3

234252: * 3 Feb 18:53:38: ISAKMP: (0): processing KE payload. Message ID = 0
234253: * 3 Feb 18:53:38: crypto_engine: create DH shared secret
234254: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET (hw) (ipsec)
234255: * 3 Feb 18:53:38: ISAKMP: (0): processing NONCE payload. Message ID = 0
234256: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234257: * 3 Feb 18:53:38: ISAKMP: (0): success
234258: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234259: * 3 Feb 18:53:38: crypto_engine: create IKE SA
234260: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_SA_CREATE (hw) (ipsec)
234261: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234262: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234263: * 3 Feb 18:53:38: ISAKMP (0:5912): NAT found, the node outside NAT
234264: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234265: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM3

234266: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
234267: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234268: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM4

234269: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
234270: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234271: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234272: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234273: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM4 = IKE_R_MM5

234274: * 3 Feb 18:53:38: ISAKMP: (5912): payload ID for treatment. Message ID = 0
234275: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 192.168.1.218
Protocol: 17
Port: 500
Length: 12
234276: * 3 Feb 18:53:38: ISAKMP: (5912): peer games * no * profiles
234277: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID = 0
234278: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234279: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234280: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234281: * 3 Feb 18:53:38: ISAKMP: (5912): SA has been authenticated with 93.73.161.229
234282: * 3 Feb 18:53:38: ISAKMP: (5912): port detected floating port = 4500
234283: * 3 Feb 18:53:38: ISAKMP: attempts to insert a peer and inserted 95.6.../93.73.161.229/4500/ 47D305BC successfully.
234284: * 3 Feb 18:53:38: ISAKMP: (5912): IKE_DPD is enabled, the initialization of timers
234285: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234286: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_R_MM5

234287: * 3 Feb 18:53:38: ISAKMP: (5912): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
234288: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 95.6...
Protocol: 17
Port: 0
Length: 12
234289: * 3 Feb 18:53:38: ISAKMP: (5912): the total payload length: 12
234290: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234291: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234292: * 3 Feb 18:53:38: crypto_engine: package to encrypt IKE
routerindc #.
234293: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234294: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
234295: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234296: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE

234297: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
234298: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

234299: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234300: * 3 Feb 18:53:38: ISAKMP: node set-893966165 to QM_IDLE
234301: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234302: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234303: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234304: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234305: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID =-893966165
234306: * 3 Feb 18:53:38: ISAKMP: (5912): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID =-893966165, his 480CFF64 =
234307: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234308: * 3 Feb 18:53:38: ISAKMP: (5912): process of first contact.
dropping existing phase 1 and 2 with 95.6 local... 93.73.161.229 remote remote port 4500
234309: * 3 Feb 18:53:38: ISAKMP: (5912): node-893966165 error suppression FALSE reason 'informational (en) State 1.
234310: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
234311: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

234312: * 3 Feb 18:53:38: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234313: * 3 Feb 18:53:39: % s-6-IPACCESSLOGRL: registration of limited or missed rates 150 packages of access list
234314: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234315: * 3 Feb 18:53:39: ISAKMP: node set-1224389198 to QM_IDLE
234316: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234317: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234318: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234319: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234320: * 3 Feb 18:53:39: ISAKMP: (5912): HASH payload processing. Message ID =-1224389198
234321: * 3 Feb 18:53:39: ISAKMP: (5912): treatment ITS payload. Message ID =-1224389198
234322: * 3 Feb 18:53:39: ISAKMP: (5912): proposal of IPSec checking 1
234323: * 3 Feb 18:53:39: ISAKMP: turn 1, ESP_3DES
234324: * 3 Feb 18:53:39: ISAKMP: attributes of transformation:
234325: * 3 Feb 18:53:39: ISAKMP: type of life in seconds
234326: * 3 Feb 18:53:39: ISAKMP: life of HIS (basic) of 28800
234327: * 3 Feb 18:53:39: ISAKMP: program is 61444 (Transport-UDP)
234328: * 3 Feb 18:53:39: ISAKMP: authenticator is HMAC-SHA
234329: * 3 Feb 18:53:39: CryptoEngine0: validate the proposal
234330: * 3 Feb 18:53:39: ISAKMP: (5912): atts are acceptable.
234331: * 3 Feb 18:53:39: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 95.6..., distance = 93.73.161.229,.
local_proxy = 95.6.../255.255.255.255/17/1701 (type = 1),
remote_proxy = 93.73.161.229/255.255.255.255/17/0 (type = 1),
Protocol = ESP, transform = esp-3des esp-sha-hmac (UDP Transport),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
234332: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234333: * 3 Feb 18:53:39: ISAKMP: (5912): processing NONCE payload. Message ID =-1224389198
234334: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234335: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234336: * 3 Feb 18:53:39: ISAKMP: (5912): ask 1 spis of ipsec
234337: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234338: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_READY = IKE_QM_SPI_STARVE
234339: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234340: * 3 Feb 18:53:39: IPSEC (spi_response): spi getting 834762579 for SA
of 95.6... to 93.73.161.229 for prot 3
234341: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234342: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234343: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
routerindc #.
234344: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234345: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
234346: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234347: * 3 Feb 18:53:39: ISAKMP: (5912): establishing IPSec security associations
234348: * 3 Feb 18:53:39: from 93.73.161.229 to 95.6 SA... (f / i) 0 / 0
(93.73.161.229 to 95.6 proxy...)
234349: * 3 Feb 18:53:39: spi 0x31C17753 and id_conn a 0
234350: * 3 Feb 18:53:39: life of 28800 seconds
234351: * 3 Feb 18:53:39: ITS 95.6 outgoing... to 93.73.161.229 (f / i) 0/0
(proxy 95.6... to 93.73.161.229)
234352: * 3 Feb 18:53:39: spi 0x495A4BD and id_conn a 0
234353: * 3 Feb 18:53:39: life of 28800 seconds
234354: * 3 Feb 18:53:39: crypto_engine: package to encrypt IKE
234355: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234356: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234357: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234358: * 3 Feb 18:53:39: IPSec: rate allocated for brother 80000273 Flow_switching
234359: * 3 Feb 18:53:39: IPSEC (policy_db_add_ident): 95.6..., src dest 93.73.161.229, dest_port 4500

234360: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 95.6..., sa_proto = 50.
sa_spi = 0x31C17753 (834762579).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1165
234361: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 93.73.161.229, sa_proto = 50,.
sa_spi = 0x495A4BD (76915901).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1166
234362: * 3 Feb 18:53:39: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) QM_IDLE
234363: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
234364: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_SPI_STARVE = IKE_QM_R_QM2
234365: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234366: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234367: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234368: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234369: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
routerindc #.
234370: * 3 Feb 18:53:39: ISAKMP: (5912): node-1224389198 error suppression FALSE reason 'QM (wait).
234371: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234372: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
234373: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234374: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP
234375: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): select SA with spinnaker 76915901/50
234376: * 3 Feb 18:53:40: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234377: * 3 Feb 18:53:42: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234378: * 3 Feb 18:53:44: IPSEC (epa_des_crypt): decrypted packet has no control of her identity

Also when I connect with the phone, I see HIS Active and IPsec tunnel is mounted, but the wire of time tunnel is down and phone connects.

I hope that you will help me. Thank you.

Hi dvecherkin1,

Who IOS you're running, you could hit the next default.

https://Tools.Cisco.com/bugsearch/bug/CSCsg34166/?reffering_site=dumpcr

It may be useful

-Randy-

Evaluate the ticket to help others find the answer quickly.

D7260: two problems at the same time - started paper jams and ink intermittent problems

First of all, let me say that the printer is out of warranty.

Paper jams – there is nothing inside the printer. Looking at the back of the printer there is a point inches long finger inside the printer (far left) plastic just above the document that grabs the paper and photo paper. Each paper and photo paper that goes through the printer grabs on this extension and ends with a truncated top left corner after printing.

Intermittent problem of ink - sometimes magenta will not print, sometimes black doesn't print, sometimes, they all will be printed.

I am ready to throw this printer out, but before I I want to take it apart. I want to take the cover off, but there seems to be no easy way to do it. Can someone tell me how to remove the cover? There seems to be two screws at the back of the printer that needs a tool small, hexagonal, but there also seem to be some pins plastic all around the bottom which can have simultaneous "pressing" need to release the tabs.

Any ideas? Don't forget, I am ready to throw this clipboard outside, but I don't want to take a "sledgehammer" to take it apart.

It did not work. Paper/transport jams now. Magenta ink still does not print. This printer is worthless. I get an Epson printer for photos. This printer D7260's official "junk" now and will be thrown...

Reg: Problem SQL Loader-

Hi Experts,
I am trying to load data from a flat file in an Oracle table, but face some problems.
Concern (1) (1)
I have a directory where there are about 20 similar files named as 'rb_1', 'rb_2', 'rb_3', etc...
All these data should be loaded in a Word only table 'X '.
Is it possible that only 1 CTL file will make a loop and load all the files in X?
Concern (2) (2)
Field delimiter is Ctrl-X (CAN: cancel) and Ctrl-M (EM: em) characters
Line delimiter is Ctrl-Z (SUB: substitute) and Ctrl-T (DC4: Device Control) characters
Is there a way I can specify this in my CTL file?
(I've only worked on delimiter of field as comma "«»", de champ comme virgule «», pas speciales personnages comme ca not special characters like that)
Please let me know if any additional information is required.
Help much appreciated.
Thank you
-Nordine

Agree with Hoek, you'd better to use external tables you can specify multiple filenames at once, otherwise you will have a script that provides the name of the input file when calling sql loader and make this script loop for each file.

Regarding the ctrl characters in your delimiters, control file supports the hexagonal versions of them for example

fields terminated by ' 09 x. "

where 9 is the hexagon of the ascii value of the character (in this case a tab character).

CTRL-m, that would be x ' 0 of etc.

Start Encore CS6 problem

I have Adobe Production CS6. I have problems to start again. It takes too long to start. On a quad core PC it starts almost immediately, on a second core i7 PC Hexagon it takes forever to initialize the transcoding. I tried items installed for Encore CS6 which seems to have only been only partially installed. The dynamic link also has the same problem. In addition, the sound does not regularly transfer. Sometimes, other times it transfers it is not for the same Premier Pro CS6 project. Editing and creating a menu in Photoshop does not transfer to yet. I have a problem that may need to be resolved by reinstalling again.
What are my options to resolve the problem?

Download you had before is part of obtaining Basic for Encore AND Premiere Pro models. The models yet since the download can be used because they describe. Just add a model to your project, then right-click and choose "Edit in Photoshop." You will see the layers that provide the functionality.

There is no magic; a menu still is just a Photoshop document.

The content of the additional library (for reminder only) provides full menu templates much more and also separate the buttons. For your item, simply add a full menu (which includes the buttons). It was their reference: the 'menu model' is a model for a full menu that includes buttons.

Lag / smooth problems with edge 7

Hey,.
It's me again, then, I have a great difficulty, any delay or smooth.
5 m, it was fine, and when I opened my edge work 5, there is no lag / smooth all bad.
But now, on the edge of 7, it's just terrible, this is my project, if you could find what the problem is:
Edge 5 here (it is smooth and without lag) > http://www.2shared.com/file/aDkn21bD/Edge5.html
Edge 7 here (GAL / not smooth) > http://www.2shared.com/file/_BcD23f9/Edge7.html
The bad news is, I work exactly in the same way, so really don't know what to do, because I can't use Edge 5 more...
Thank you.

Hi, Paolo.

Sorry for the silence on this point - we have been working on it internally and we believe that we have discovered the source of your problem. First of all, here are the fixed files:

Published files:

http://www.gotspit.com/edge/mobileTransparent/index_h.html

Source files (including a published folder):

http://www.gotspit.com/edge/mobileTransparent/edited.zip

What was going on, it was that you were maxing out the memory of the device on the iPad. Even if your png is small on the device, they are each 1024 x 768 with huge parts of transparent background. While this tablet really well in PNG format, he ends up taking a lot of memory when he gets blitted to the screen, as the operating system interprets the PNGs and transforms a bitmap internally. Then think: 1024 x 768 x 4 bits per pixel and 19 pictures (18 pictures falling and a background image), as well as a possible additional bit per pixel transparent to indicate its status as a transparency. Depending on the device, it could run out of memory pretty quickly.

So that it is much lighter, I've cropped each PNG as close to the image I could using Fireworks and then edit the file to use x, info is for the image to animate dashboard instead. Once we released this version, we were unable to reproduce your problem.

Please let us know if the new version hosted on my server works best on your device! BTW, the graphics are beautiful, and I like the hexagonal works.

See you soon,.

-Elaine

Problem with sha-256 digest: missing zeros!

Hi, I'm doing a "Digest" sha-256, leave a string, it's that in the digest resulting some zeros are missing!

Digest itself is not wrong: other characters are very well... for example, let's say I had a string like this:
'64C6DDE3E579B6D986968D3445D23B15CAAF128402AC560005CE2075913FDCE8363739303358303038323339330025532682B1 '.
Correct sha256 digest would be:
'0986d134680fa055c32f86738ad67108c8028a2ea6fc31d5d64b5c8e43901f42 '.
but I get
'986d13468fa055c32f86738ad6718c828a2ea6fc31d5d64b5c8e43901f42 '.

Here is my code:

String beforeHash = aString;  //each couple of chars is a hex number so ...
byte b[] = (new BigInteger(beforeHash,16)).toByteArray();
String result = getHash(b);
System.out.println(result);

public String getHash(byte[] passwd) throws NoSuchAlgorithmException{
          MessageDigest msg = MessageDigest.getInstance("SHA-256");
          msg.reset();
          byte output[] = null;
          msg.update(passwd);
          output = msg.digest();
          StringBuffer hexString = new StringBuffer();
          for(int i=0;i<input.length;i++)
               hexString.append(Integer.toHexString(0xFF & output));

          return hexString.toString();

     }
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
			 Not a problem in Cryptography. Integer.hexString () does not preserve the leading zeros. Change to use String.format("%02X",v) or use one of the free hexagonal encoders.

 
            
            
		     Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem? 
			 How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?
			 Hello wdemetris,
Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.
As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.
Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.
If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.
Thanks again and have a great rest of your day.
		    
            
            
		     My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem? 
			 My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?
			 Hello brooksm549,
Thank you for using communities of Apple Support.
I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:
On the use of the battery on your iPhone, iPad and iPod touch
When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:
Maximize the life of the battery and battery life
Best regards.

 
		 
          Maybe you are looking for 
           
            
		     My modules do not work all of a sudden with firefox 43.0.1 
			 This morning, they worked; This afternoon they do not. the error message indicates that they can be verified. should each module be developed by its owner? What a mess! I use windows 7 and firefox 43.0.1. 
		    
            
		     How to deal with display driver error? 
			 I use a Toshiba laptop and it hangs on me. He says it's something to do with the display drivers. I can only use it in safe mode.I tried to download the drivers from the Toshiba site but it says that I don't have software to support specifications (p 
		    
            
		     on the bar a bubble of tasks said "you have files and files ready to transfer them to a cd, dvd etc so I they will no longer be in the files on the computer? 
			 it I s asking me to download a number of my importaht photos, will be permantlly removed from my computer? 
		    
            
		     Need help updating the firmware on a Designjet T770 44 inches. 
			 Hello I just bought a 44 inch Designjet T770. I had some small problems of implementation as the inks were obsolete, and a print head needed replacing. They have been sorted and now it seems to work properly but always tells me that I need a firmware 
		    
            
		     How can I change the user of "My Documents" by default? » 
			 I'm changing the user to 'My Documents' which has initially set up a laptop from the MFG.  while I can use it to another employee. I changed the name of the computer, but how do I change the user of "My Documents" by default? »