Hi guys, I have an error when I use creativesdk in my application

Similar Questions

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)

  According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.

  When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.

  What I have confirmed:

  -Camera is switching between inside and outside triggering.

  -NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.

  When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:

  Code :-1074397150

  The possible reasons for a timeout.

  Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?

  So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.

• I keep getting out of memory errors when you use Windows Media Player.

  original title: of memory error

  Hi, I have a Windows 7 PC brand new with 12 GB of RAM, but I get low on errors of memory, especially when you use Windows Media Player. I tried:

  -Execution of the antivirus scans

  -Cleaning things out of the startup folder

  -Increase in the size of paging file

  I can't understand what the devil is the cause of this error - as I said, it's a new machine, and is not practically nothing on it yet.

  Any help is appreciated.

  Hello

  Follow these steps and check.

  (a) open 'command prompt' as an administrator (programs, accessories, right-click "command, prompt" run as administrator).

  (b) type the following without the quotes and press ENTER.

  "for %a in (% systemroot%\system32\wm*.dll) do regsvr32 /s %a.

• Error when you use the feature Version «Back upward in a file»

  I run an error when you try to save a file version. The error is below to:

  There was an error trying to get the status of the job.

  1: the server returned an error during the processing of the action: CloseJob. Error message: String reference not set to an instance of a string.

  Parameter name: s

  As you can tell, he didn't give me much to do.

  Some background information:

  -J' trying to backup/export a version that has been upsized QA development

  -QA and development have the same version/patch 11.1.2.3.500

  -This version has been imported into the development, and then copied, and then mixed with a development version.

  -I did not receive any errors during this process

  -I am able to backup other files without getting this error

  Any help will be really appreciated.

  Thank you

  Aaron

  Hi Aaron,

  At first glance, it looks like there may be a string of property that is not a string data type. However, before you dig too deep, try to reload the version to see if that makes a difference. I had a similar problem before and it is solved.

  Thank you

  Jordan

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.

• I can't view a PDF at chrome online help. I don't have this problem when I use safari or after downloading the chrome.

  I can't view a PDF online when I use chrome. The screen flickers.

  When I open the file using safari. This is not the case.

  This problem appeared only recently.

  could someone help.

  The ability to look at a PDF is built into Chrome, and if she's not digest a PDF file that can manage other applications, it is on Google, or the incompatibility of the additional features you have recently installed in Chrome. You use the latest Chrome?

• Control reference 1055 error when you use a loop for

  Hello

  I'm having a problem using control references to accomplish the following: I a VI that reads data from a text file, and then uses that automatically update the value of a control on front panel on two live different, then set the default values, and then save them. Comes from the array of control references, I tried looping on text labels until I have find the one corresponding to the order, I want to change and then update its value. The problem I have is that if I use a loop for, then 9times of LabVIEW 10 complains error 1055: "LabVIEW: object reference is not valid. If instead I the wiring to the index table and manually extract the reference, then it works every time and for each index of the reference of the order.

  Can someone take a look at my code and just see if its obvious what the problem is? In this case, I have a simple solution, but I would really like to understand what I did wrong. I have included as a code snippet, but also attached the files if that helps (Its Import_Colormap.vi, which is the problem). Persons with disabilities code fails, the active code works but I can't see what is really the difference between them - I can change the index of array 0,1,2, 3. and no mistake.

  Thank you.

  

  Your "Colormap.ctl" is a strict type def that contains a ring.  You define the elements programmatically, make the default values, and then save the "Colormap.ctl"?   I was never practicing this but here is a thread that covers this in detail. I do not understand what you expect reach by running.
  The next thing: at the same time (at the same time!), you open the Colormap.vi (this is what we see in yout PNG) that contains an instance of the Colormap.ctl on the front panel. I'm not pretty sure if LabVIEW can handle this correctly. This could be the reason why you sometimes get the error 1105.
  I prefer StringsAndValues and eventually the value of the ring running.  There is no need to do it with a def of strict type.

• How can I fix the cannot find server error when you use Bing?

  When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.

  Hi MineMN,

  ·         Did you do changes on the computer before the show?

  ·         What web browser do you use?

  If you are using Internet Explorer, follow these methods.

  Method 1: Follow the steps in the article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Method 2: If you still face the same problem reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  Method 3: Reset the proxy server. Follow these steps:

  (a) click Start, run, type cmd , and then press enter.

  (b) type the following commands at the command prompt and press enter after each command:

  proxycfg d

  proxycfg-u

• TWAIN errors when you use Canoscan3200F on Win7

  I get error TWAIN when you use Canoscan3200F on Win7. Tried to use Canoscan Toolbox 4.5, Irfanview 4.32 and Windows Fax & Scan - all give variations of the TWAIN error, bascially do not recognize the scanner, even if it looks OK in Device Manager.

  CanonScan said - could not open TWAIN source.

  IrfanView, said - rmslantc.dll missing.

  Windows Fax Scan & said - no scanners not detected.

  Hi the string 1,

  Make sure that a certain folder path is in the PATH environment variable. Follow these steps:

  (a) first, to determine the correct path to add to the PATH environment variable.  Look in C:\Windows\twain_32 and there should be another folder (example:-CNQ4803). This is the way that is needed to be added to the PATH environment variable. C:\Windows\twain_32\CNQ4803

  (b) alter the PATH environment variable. Go to Control Panel, Systemand then choose Advanced system settings in the left column.

  (c) this will bring up the System Properties dialog box (it should already be in the Advanced tab).

  (d) at the bottom of this dialog box is a button Environment Variables .  By clicking on this button to display the Environment Variables dialog box.

  (e) in the bottom panel, scroll down until you find the variable named Path.  Select it and then press the Edit button to bring up the Edit System Variable dialog box.

  (f) in the Variable value text box, scroll all the way to the right, and then add the C:\Windows\twain_32\CNQ4803 path that was determined earlier.  Be sure to separate this value by a preceding semicolon.  And also be ensure not to make further changes to this value. Click OK.

• ORA-16000 - error when we use multiple db in ADG links. 11.2.0.3.

  Hi all

  We are facing the question with ADG. When we use several dblinks in the join condition, it returns an error ORA-16000.

  My requirement is to create a view using a db link and create a new view using another db link. and then create it again with the help of these two points of view.

  ex:

  Create view v1 as select 'x' one of test1@dblink1;

  create view v2 as select 'X' b of test2@dblink2;

  create view v3 in select * from v1, v2;

  for this requirement, I get the error ORA-16000.

  Kind regards

  Malek

  Can one answer for this?

• There is an error when I try to download an application via the cloud

  When I try to download an application via the cloud, there are 34 error:

  Exit code: 34

  Please see specific errors below for troubleshooting. For example, the ERROR:

  -------------------------------------- Summary --------------------------------------

  -fatal error 1, 0 error (s)

  FATAL: Payload "Package Microsoft redistributable Visual C++ 2010 (x 64) 9.0.0.64 {9D2A060F-AC6B-11E0-8C00-00215AEA26C9}' information not found in Media_db."

  -------------------------------------------------------------------------------------

  Because of this fatal error, I'm not to download software cc,

  I already see for this error but not found

  I'm on PC

  Hello

  Please refer to get fatal exit Code 34 when installing an application

  Concerning

• get the error when you use the TRIM method in the collections

  Hi Experts,

  When you use the TRIM method I get below error. I make any mistake here?

  DB: Oracle 11g

  SQL > declare

  2

  emp_tab of type 3 is the employee table % rowtype index directory.

  4 l_emp_tab emp_tab;
  5

  6 start

  7

  8 select * bulk collect into l_emp_tab of employees;

  9 l_emp_tab.trim (5);

  10 dbms_output.put_line (l_emp_tab.count);

  11

  12 end;

  13.

  l_emp_tab. Trim (5);

  *

  ERROR on line 9:

  ORA-06550: line 9, column 2:

  PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

  ORA-06550: line 9, column 2:

  PL/SQL: Statement ignored

  Thanks in advance for your help.

  See you soon,.

  Suri

  For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

  Gerard

• error when you use the Export-CSV cmdlet

  Hello

  I get the following error when you try to pipe the output to a csv file

  " Could not bind the parameter argument 'InputObject' because she's nowhere.'"

  The output is placed in the csv file, but I get this error at the end of the script.

  Here is the code:

  ##Variables

  ###################################

  $report = @)

  $CSVfile = "d:\Vm_Report.csv".

  $VMs = get-vmhost | Get - VM

  ###################################

  {foreach ($VM to $VMs)

  $VMx = get-view $VM.ID

  $HW = $VMx.guest.net

  foreach ($dev to $HW)

  {

  foreach ($ip in $dev.ipaddress)

  {

  $report += $dev. Select @{Name = 'Name'; Expression = {$vm.name}},@{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}.

  @{Name = 'Property DL'; Expression = {$vm. CustomFields}}

  }

  }

  }

  $report | Export-CSV - NoTypeInformation $CSVfile

  Thank you

  The attached script implements the test of the $HW variable.

  In my test environment, Export-Csv now works without any problem.

  Give it a try.