Hi I do not know what is his contract number, where is it?

Similar Questions

• do not know Apple ID, password and do not know what email has been used.

  Dear,

  my friend has activated its phone of one of the shops in one of the markets.

  Today, after the restoration, now he doesn't know what Email. Apple ID and do not know what email have been used

  so now the phone is stuck in the activation step.
  is there anyway you can skip this step or change this Apple ID?

  He went to the market, but the market is now closed and moved to somewhere else and he can't find the person who created this account for him.
  Please helpp.

  Thank you

  BR,

  Yossef

  shahokoyee wrote:

  Dear,

  my friend has activated its phone of one of the shops in one of the markets.

  Today, after the restoration, now he doesn't know what Email. Apple ID and do not know what email have been used

  so now the phone is stuck in the activation step.
  is there anyway you can skip this step or change this Apple ID?

  He went to the market, but the market is now closed and moved to somewhere else and he can't find the person who created this account for him.
  Please helpp.

  Thank you

  BR,

  Yossef

  No it not there no action to jump.

  You have probably fallen on this.

  Turn off find my iPhone Activation Lock - Apple Support

  Find my iPhone Activation Lock - Apple Support

• I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key

  I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key or any body help, I can't use it

  You must order a set of recovery disc for the computer from the manufacturer - this will install the appropriate drivers for your system automatically, as well as packaged applications.

  If you have not formatted the disk (or replaced) existing partition recovery may still be present - see your manual for details.

  It is possible to download Vista - see here for more details - http://www.heidoc.net/joomla/technology-science/microsoft/57-windows-vista-direct-download-links -, but note that it is not a simple process!

• Hi, my laptop had rose appear on the screen do not know what it is and how to get rid of? pls help me.nicole

  Hi, my laptop had rose appear on my screen do not know what it is and if it is normal that in laptop? Thank you, Nicole

  Hello

  If this continues, contact technical support to your system manufacturer and check their forums (if any) for known issues.

  Try a system restore before it happened. You can use the SafeMode if necessary - several times
  as you start, press F8.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -----------------------------------------------------------------------------

  If no joy you can once again tap F8 as you boot and select last good Configuration know.

  ----------------------------------------------------------------------------

  And need to update your video drivers:

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• a pop up keeps saying your system administrator has blocked you from running this program, do not know what the problem

  ORIGINAL TITLE: Please help!

  a pop up keeps saying your system administrator has blocked you from running this program, do not know what the problem is please help

  Right-click on the program in question and click Run as administrator,

  When you are prompted, enter the administrator password.

  If you don't know what type of account you have.

  Click on the Start button in the taskbar and click on photo of your user name at the top.

  

  

• Hi, I do not know what I can't choose Kit the student for 20 dollar to month

  Hi, I do not know what I can not choose Kit for the 20 dollar monthHi student, I don't know what I can not choose Kit for 20 dollar to month student!

  Educational https://creative.adobe.com/plans?plan=edu

  http://www.Adobe.com/products/creativecloud/students.edu.html

  http://www.Adobe.com/education/students/student-eligibility-Guide.edu.html

  Redemption Code https://creative.adobe.com/educard

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• I bought membership CC photography... but still my request as downloaded as a trial... and advising me to buy... When I click to buy it tell you already bought... Please help do not know what to do

  I bought the membership CC photography... but still my application at first instance... and advising me to buy... When I click to buy it tell you already bought... Please help do not know what to do

  Lightroom trial has expried so I can't use it anymore and photoshop is downloaded as a trial for 30 days

  Hi Ali,

  Please see this document to activate it:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Double post.

  Let us know if that helps.

  Concerning

  Megah Rawat

• I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for pension

  I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for support
  I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for support

  Hi debcorr,

  Do you have a code error message when you try to use Windows Easy Transfer?

  You can follow these links that should help.

  Upgrade Windows XP to Windows 7

  Description of Windows Easy Transfer for Windows Vista

  You can follow this link to contact Microsoft Customer Service.

  How and when to contact Microsoft and support Customer Service

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L755D-S5104 - does not know what the problem

  Hello
  I keep a L755D-S5104.
  AMD A6 3420 M with Radeon 6520G
  4 GB of Ram
  500 GB hard drive.

  The problem with my laptop recently is that I am getting i/o device error (WriteToDisk) errors thus the laptop hangs / crashes with a screen of jibberish/sand-of looking.

  So far, I got error screen with my PC as well before and I'm pretty sure it's because of the unstable driver for video/chipset. I solved as before with the installation of older drivers (but for my laptop, I can't find a choice of versions)

  I don't know if my hard drive is the cause which as well (due to the error WriteToDisk) since mainly these two errors occur at the same time. Maybe my drive is in good health, but the video/chipset driver is causing the problem?

  My laptop temperatures are normal and there is no noisy fan noise etc.

  HDTune bad block scan displays the status of my drive HARD 100% OK but the chkdsk /r utility accidents near about 45000/67000 (screen white/jibberish causes), also, I have attached my laptop HARD drive to my computer and run the chkdsk utility it without error.

  I don't know what to do? Given that I've hardly know his choice of drivers for S5104. The error started to appear since the last two days and before that my laptop was perfectly fine.

  Post edited by: zeineb

  On this virtual path, it is not easy to say what the problem is. What you can try is to do some tests and, as I see you do this very well.
  Try to get the new HARD drive and install original recovery image on it and to experiment with the settings and clean the preinstalled OS. If you do this thanks for posting comments.

  By the way: all the drivers, you should be able to find on http://support.toshiba.com/drivers
  Just put Satellite L755D-S5104 from here and you will get the list of all available drivers.

• OfficeJet 4650: Can not know what connection type to use for my OfficeJet 4650.

  OK, I'm very "technically challenged" here, so bear with me.  I had a HP Deskjet 3454 and unplugged the connections between it and the tower. I thought that the same ports on the back of the old printer compatible with the new printer... ports would not be so.  There was also a small black adapter with a purple connection on one end and a connection of two pins at the other end on the old printer.  I don't know what to do with that and my new printer...  The instructions say "no USB cable included" and I don't know what to look for when I go to Best Buy.

  I have an ATT router connected to my computer, but no ports on this subject corresponds to nothing on the printer, so I don't think that I have a "wireless connection".

  You can see that I really don't know much about connections, good!   Help!  I had to USE MY PRINTER.  Thank you.

  Judybelle

  Hello

  OK, you can connect wireless computer also supported wireless using the same wireless router. If you want to use the USB connection, you can reuse the old cable or buy a cable that is similar to the following cable:

  

  Kind regards.

• Pavilion 17P047CI: do not know what the problem is.

  I bought a black linear Recertified HP 17.3 "Pavilion 17-P047Cl PC laptop with processor of AMD A8-7050, hard memory of 8 GB, 1 TB and 8.1 of Windows of Walmart. I don't know that much about computers. But I know a little.  I picked up today and brought it home and started putting in place. I went through the first couple steps, and it is stuck on a screen that says ' almost ready don't shut down your PC "for over an hour now... What can I do? Is there something wrong with it? If I try to restart or something, which completely ruin it? I don't know what to do here. Any help is appreciated.

  I should also mention that there are no numbers or anything outside the laptop... I have no idea how to get more numbers to help you. Unless I remove the battery, who would have turned off the laptop. And I think those are just the numbers of the battery?

  JustJenn84

  Hello;

  Let me welcome you on the HP forums!

  I read your post about the problems with your new HP PC and wanted to help.

  You should not have problems with a PC this new.

  My suggestion is right for you is to go back to Wal-Mart and request a refund or a replacement.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• I did a cover in my pc. Now, I can't download java - I get this error code 25099; I tried aeverything; reading support and I do not know what to do

  I had a recovery in my computer. I went to my control panel and I removed the java. Now I "m trying to download java 6 update 17, and still I get this error: 25099."
  I went on java.com and read all the solutions and do not help.
  I don't know what to do to download java

  Hi Pily2009,

  Welcome to the Microsoft answers site.

  There could be traces of Java on the computer, you can download Microsoft Installer Cleanup Utility and uninstall all traces of Java which is present on the computer.

  See the link to download Windows Installer Clean up Utility: Description of the Windows Installer CleanUp utility: http://support.microsoft.com/kb/290301

  Step 1: Completely remove the content of the following directory: C:\Program Files\Java\jre6\ (or another directory if you chose the install a default location)

  Step 2: If step 1 has problems for leave due to locked files or in use, reboot your system

  Step 3: Now, completely delete the contents of the following directory: C:\Program Files\Java\jre6\

  Step 4: Download and install Java.

  1. Go to Java.com
  2. Click the free Java download and launch the installation.

  If the problem persists, then I recommend that you communicate with Java for more assistance.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've been playing with services.msc now I can't download anything and I do not know what services allows the download

  im sure it is a result of deactivation and activation of services, I was also a lot so just trying to figure out which are useless and I can't run restore system or something like that, I just need help so that I can download an anti virus and updates, so the download controls? What service? This isn't a problem of IE. If anyone has any ideas for me that does not involve downloading something else, or the copying of files from drive of windows or putting forms those are all out of the question.

  even when services are basic, only 3 services are enabled, and I can't even access the internet, so I just need to know what essential services are Internet ONLY.

  Link to PML is a good thing. But, really, almost any PC is certainly capable of running all services by default with no performance hit.

  To repair the damage you have done, run system restore to get the best results.

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.