Hi I have a hp Pavilion a6110n due reformat now dvd/rw only readings select a disc

Similar Questions

• Hi all, I have a HP Pavilion DV6, is stopped reading DVDs and now reads CD HELP Please!

  OK so I have a HP Pavilion, about 3 days ago, that he has stopped reading DVDs now it only reads CD? Any help is appreciated

  Thanks in advance John.

  Data sheet: HP Pavilion DV6, Windows 7 Home premium, 3 GB ram, 277 GB HDD main, 21GB HARD drive named RECOVERY, 99 mb HARD drive named HP_TOOLS, ATI HD4250, ATI hd5470, amd turion x 2, wifi all the ordinary, dongle bluetooth etc.

  Thanks again!

  If the Microsoft Fixit does not correct the problem by removing the upper and lower filter drivers, then the device is not so fully operational...

  It's aid. Now, you know that it must be repaired or replaced.

  To fix your DVD player, there is no silver bullet through the ethernet. Of course, if you want to be Mr. Fixit, just find out what laser is bad and replace it.

• I have a hp pavilion ze4200 laptop and he asks me to open a session with a password, inever due do this to see my front windows stuff how can I me without a password?

  I have a hp pavilion ze4200 laptop and he asks me to open a session with a password, inever due do this to see my front windows stuff how can I me without a password?

  Hello

  It is not possible to connect to the computer without entering the username and password...

  You can create a new user account and leave the section blank password... in this case it will not lead to enter the password.

• Replacement motherboard for Pavilion a6110n desktop PC / BIOS version

  Newbie here.  After reading on various forums and watch clips of youtube, I think I can do this.  I'm no expert, as experienced folk you will quickly realize. But I messed up with computer hardware installed in the past.

  Problem: my screen froze, accompanied by groups of small lines dotted migration across the screen. Upon reboot, the screen is black and all off.  The monitor works on another computer; However, the computer monitor displays No Signal when connected to my computer.

  I went through the troubleshooting guide "monitor or TV is empty after starting the computer" on this site.  Nothing has worked - at the end it says replace video cards or a Service.  I decided that my computer has no se video card.  but that the video is built into the motherboard and that is what needs to be replaced.

  The Board of Directors is NARRA2-GL8E, M2N68 - LA, Ref. HP 5188-8534.  I can quite easily replace the Council itself. I want a PLUG-AND-PLAY solution.  But what I've read is that, unless the replacement AND the version of the BIOS card is exactly the same, some BIOS reconfiguring is necessary, and that's what I'm a little uncomfortable with. I found a Board to sell with the 5.10 Version (6/23/2007-Phoenix).  Problem is without a video signal, I can't tell what version I have (my original BIOS version somehow traceable by serial number? Pavilion a6110n, System #GG718AA, S/N CNH71903LB, Best Buy bought 23/11/2007).  For what it's worth, I also found (on this site) is only a BIOS update for my computer: 2007-11-09, Version: 5.13, 1.36 M

  If I have no way of ensuring plug-and-play, I'll probably go ahead and fork over the dough to a professional because I'm worried about messing with the BIOS with no prior experience.

  Any input is welcome and appreciated.

  IF you have ordered has been authorized the Office of a HP service provider (or HP), then it should come with instructions. Should be just a swap. Good luck.

• Pavilion a6110n and AMD Virtualization

  HP Pavilion a6110n and AMD Virtualization (not sure if it is a hardware or software issue)

  TECHNICAL DATA: AMD Athlon 64 X 2 processor Dual - Core 4400 + 2.30 GHz

  BIOS: Phoenix Technologies, LTD 5.08 04/05/2007

  This processor supports AMD - V?

  Can it be enabled in the BIOS?  If so, what is the procedure?

  Thank you

  Here is a link that can answer your question:

  http://www.AMD.com/us/products/technologies/virtualization/pages/AMD-v.aspx

  What I can see, it seems that only Opterons support AMD - V.  Opterons are made to be used in servers.  They will work in desktop computers, but AMD does not provide support for them in this environment.  You can read the information in the link that I provided to see if you can find other CPUS that have.

• upgrading processor on Pavilion a6110n PC

  Hi, my has a Pavilion a6110n a processor AMD Athlon 64 X 2 dual core 4400 + How can I know what would be the processor power more high which can support my motherboard? What I have to stay in the Athlon X 2 family at 65 watts or could I go higher in 95 watts Athlon X 3 or X 4 processors?

  Thank you

  clamor33

  The Athlon 64 X 2 with Dual Core technology up to 5600 + (up to 89 watt) is higher than what processor your motherboard accepts. Here is a link to your PC support pages.

  

  Best regards
  ERICO

• Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency?

  Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency? A book of dollar $50 USA could go to over $ 100.

  Apple print products are quoted and charged in the local currency

  and the calculation of your Exchange rate is whack too - the CD is $0.77 USD - no $0.. (50) but the exchange rate is not serious since quotes and fees are in local currency

  LN

• I have a HP Pavilion A6700Y. Currently, access to internet by modem. Want to go wireless and use

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  cmm0822bam wrote:
  

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  What type of modem do you have?

  Do you hear an old style phone modem or a cable modem?

  If you have a cable modem and it is not wireless, then you'll need to buy a modem wireless also has four LAN ports. Connect the WAN port on the router to the modem that provides your internet connection and then configure the SSID of the router and the wireless PC network card.  The easiest to install and configure is brands like Linksys and Netgear. Your PC with a built-in B/G wireless network adapter. Purchase of a high-tech Wireless-N Dual band Router router would be too much serious.

  Best regards

  ERICO

• I have a HP Pavilion a6210z he aPCI-E x 16 slot, one PCI-E 2.0 will work?

  I have a HP Pavilion a6210z he aPCI-E x 16 slot, one PCI-E 2.0 will work?

  Hello

  PCI Express x 16 2.0 is fully backward compatible, then Yes, it won't work if it's the only issue.

  Kind regards

  DP - K

• I have a HP Pavilion Elite m9060n desktop PC and want to have two monitors.

  1. I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in dos I/O ports there is a VGA slot but there is a black top, lid that States do not remove.  This means that the port is not available?
  2. I have also a port HDMI as part of The NVIDIA GeForce 8500 GT can I use that and the DVI port on the NVIDIA GeForce 8500 GT to have two monitors?
  3. Can I use a DVI splitter with DVI-d port on the NVIDIA GeForce 8500 GT to have two monitors?

  NVIDIA GeForce 8500 GT

  

  

  1.I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in DOS i/o ports, there is a VGA connector, but there is a black top, lid that States do not remove.  This means that the port is not available?

  YES, the white cover means that the port / ports are not available. Most HP consumer computers automatically disable the onboard graphics when a x 16 PCIe graphics card is installed

  2.i have also a port HDMI as part of the NVIDIA GeForce 8500 GT can I use that and the port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  Yes, you can use the HDMI and DVI-channels simultaneously to support two monitors. Here are the specifications of your desktop HP Pavilion Elite m9060n. According to the specifications;

  1 - S - video *.
  2 HDMI
  3 - DVI - I (dual link) *.

  Supports two displays at the same time

  According to observers, you may be able to use your current configuration to drive two displays. You can use two HDMI screens with a HDMI and a DVI-HDMI cable. You can use two monitors DVI - D DVI cable with a DVI-HDMI cable. You can also use a monitor VGA and HDMI or DVI - D and VGA monitor with appropriate adapters and/or cable. Please provide the brand and models of two monitors for most accurate response.

  3. can I use a DVI splitter with port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  N °

• HP Pavilion 17 g 106nf: I have a HP Pavilion 106nf 17 g increase RAM.

  I have a HP Pavilion 17 g 106nf (energy star) and I want to upgrade the RAM.  What are the best RAM to get, Furthermore, how high can I do?

  Here is the Service Manual:

  Manuals

  It will take up to 16 GB of RAM, or 2 of these 8 GB modules:

  Module of memory of 8 GB 670034-005

  The problem is that this upgrade memory is very difficult. Requires the removal of the motherboard.

  See p. 116 of the manual.

  http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_2?ie=UTF8&QID=1463957621&SR=8-2&keywords=DDR3L-1600+so-DIMM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PC HP Pavilion 15-p028TX NB AL: I have a HP Pavilion 15-p028TX NB PC all THE Windows go unable asking power on password.

  I have a HP Pavilion p028TX 15 NB PC all unable will ask for power on password for windows.  He said disabled system 55541760 after 3 failed attempts.   Help, please!

  Hello

  Enter: 40429366

  Kind regards

  DP - K

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• The graphics upgrade cards because I have a HP Pavilion p6120f

  I have a HP Pavilion p6120f. I want to upgrade the graphics card to run modern games. Can someone help me? My current one is a chipset family.

  noelalmanza wrote:

  I have a HP Pavilion p6120f. I want to upgrade the graphics card to run modern games. Can someone help me? My current one is a chipset family.

  Hello

  http://support.HP.com/us-en/document/c01746794

  PCI x 16 graphics card slot

  Buy a VGA compatible PCIe x 16. It's in your pocket and compatibility with the operating system.

  https://www.Google.co.UK/webhp?SSRP=1#q=PCIe+x16+best+graphics+card

  You can install the new card into the slot, connect the monitor and one integrated turn off.

   

• I have a HP Pavilion dv6 Notebook PC that goes to sleep a minute after not useven but on ac powe

  I have a HP Pavilion dv6 Notebook PC, which is only several months old.

  When you use the power of my screen keeps going sleep after 20 seconds of non-use. I then have to sign in each time

  How can I fix this please?

  Hello

  Open windows control panel, open personalization, click on the link of the screensaver at the bottom right and in the next window, set the 'Wait' time to 15 minutes and Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the setting.

  Then again open windows control panel, open Power Options, click Change settings next to your currently selected diet plan plan and set the time to "turn off screen" (for the battery and Plugged In) to 20 minutes.  In addition, set the time to "Put the computer to sleep" (again, in two areas) to you will find more acceptable as long as values that you set values is more than 20 minutes (or you can set one or two boxes forever to prevent sleep in total).  Once finished, click on the button Save changes to keep these new values.

  Kind regards

  DP - K