Hi I have a notebook of dv9716nr with two memory expandable gig to 4, but for a reading at a concert

I tried the upgrade of 4gig but laptop will not read memory 2gig for some reason chip any. I'm not bit of computing, but it must be a simple process. If the computer came with 2 toques memory concert why there is only one bed now? I tried switching the memory chips, but it seems that the background is the reading of the Bay and both chips work in bottom Bay. Someone at - it ideas that I have no financial means of fixation via Tech geeksquad or hp (out of warranty)

If the bios update fails for any reason, it can make the PC unusable and must be sent for repair of the bios.

http://www.fixedbios.com/

Tags: Notebooks

Similar Questions

  • My computer crashes randomly (usually by moving the mouse) and Microsoft, NVIDIA tried everything to fix it with no luck. Anyone having this problem? I have an Alienware Area 51 with two video cards in SLI 8800 and 4 GB of RAM.

    The display freezes randomly. The Windows desktop, on the Web pages and during the games. This problem started when I had Vista and I have improved the thought that the BONE was the problem. It is not the case. I added 2 GB of the thought of RAM I need more to no luck. I have now deleted 1 graphics card and the problem persists. I deleted all software except the OS and the problem persists. When you start Windows in safe mode, that the computer does not freeze.

    You are either having a video card driver problem or a ram memory stick problem.  I suggest that you check your ram and the settings in the BIOS.  Use security settings BIOS for the ram as the auto setting.  The Intels i7 have a little problem sometimes with more than one ram Strip and having the highest speed at stake.  Check this and get back with me. I have a simple philosophy: just assume everyone is a piece of c.r.a.p. and then be pleasantly surprised if you find someone who is not.

  • HP 15 Notebook PC: The with two beeps with long Bios boot pause inbetween

    When I start my laptop, it will be short beep... pause... short beep... and then start normally. He was always switched over to Windows, but I would like to know if it is tell a problem of memory or just what it is... And I couldn't find it on any lists of codes Bios that has the break. I don't know if it's important, in fact.  But I'd rather be safe then sorry. Thank you.

    Hello

    Should it be flashing led too? Please also check the lights and follow the instructions below to fix:

    http://support.HP.com/us-en/document/c01732674

    Kind regards.

  • Workstation XW8000 with XP recognizes the new DVD player but will not read DVDs

    I just added a DVD player for my HP xw8000 workstation. It is being prepared to try installing Windows 7. Windows 7 Upgrade Advisor says that my machine calls brilliantly... all green. Also, because many new software products are released for MSDN on DVD, it is necessary for me to be able to use this DVD ROM.

    I installed the DVD drive is recognized by WinXP Pro with all the latest service packs. Shows up as drive E in Explorer, it appears as a CD ROM In Device Manager it is listed as E - IDE DVD - ROM DVD-8212. However this player will not read a DVD!  I tested the DVD media in another more recent machine and it reads very well in a same DVD ROM.

    Is there something wrong with the xw8000 it cannot read from a DVD ROM drive?

    Thanks for any help.

    Weird that you receive notifications by email of responses. Usually, this is the default setting. When you type a response, it is usaully a box that is checked to receive notifications by e-mail. (Top right)

    I agree, the DVD player seems to be defective. It should work with only Windows drivers. The only additional files that you need would be to play movie discs, etc.

    Are your jumpers on both drives positioned same_If the cd drive is jumper as master, the other slave as you. If the other player is cavalier CS (cable select) the dvd player must be linked, CS. I think most of the HP machines are CS. Try that to see if it solves. If this isn't the case, maybe time to try another drive.

  • I have Samsung Notebook with WindowXP and can I upgrade to Windows 7?

    I have Samsung Notebook Windows xp with INTEL Atom N450 1.66 Ghz, 1 GB Ram, 140 GB HDD can install Windows 7

    Original title: running of Windows 7

    I have Samsung Notebook Windows xp with INTEL Atom N450 1.66 Ghz, 1 GB Ram, 140 GB HDD can install Windows 7

    The system requirements are the following...

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    and it would be wise to check the availability of driver before the upgrade, as it is already proposed...

  • I have a hp mini 110 with a locked bios

    I have a hp mini 110 with a locked bios and 8 hash code for the figure of 88070525. can I get help please? Thank you

    A try.

    37958501

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

    Let me know.

  • Can I use separate iCloud for accts Windows on a pc win10 with two accounts?

    CCan I use iCloud separate for Windows accounts on a pc win10 with two accounts?

    You can, but it will be a bit heavy on your part, juggling two accounts, because you will have to a connection, and then connect to another, etc.

  • Wreath with two C40 x 4 cameras

    Hi all

    I wonder if I can connect in series with two 4 x cameras(CTS-PHD-1080P4XS) for C40, TC5.x.

    Is it possible to not do that by buying cable (CAB-VCDC - 6.5 M =) Garland?

    I checked "precisionhd_1080p - 720p_camera_user_guide.pdf", but there was no description on 4 x cameras for C40.

    (I found some descriptions on PrecisionHDMC 1080p4x here, but they must be 4 x cameras only for C20)

    I guess it's possible because 1080 p 12 x cameras that can in Garland, have same physical interface devices to 4 x 1080 p for C40.

    Best regards

    Kotaro Hashimoto

    Hello

    I just want to wear to your knowledge this old 4 X cmaera has the same port as 12 X camera; However the use of software RJ45 is block 4 x camera so all in Garland 4 x camera will be last camera because only the RJ11 port will work.

    Kind regards

    Vivek

  • Using the same value of the column with two conditions as different results

    Hi all

    Maybe it's easy to answer what I'm trying to do now, but my brain really stop and I need your opinion. I have a table of account which has values like below

    Account Fairy OBJ type of Unit year
    11500196AA130

    20

    12000196AA1302012000-196AA1302011000-196AA1302023000196AA1302024500-196AA13020

    If I can get flow and receiveable with two different query sql like underneath, but I can't get the flow and the reciveable with the sum in a row and sql. Please give me some opinions to go.

    Thank you

    SELECT

    To_char (Trim (Account)) Account_no,

    (select accountname in AddressBook where accountname addid = TO_CHAR (TRIM (account))),

    Sum(Fee/100) flow

    Of

    account tb1

    where

    obj in ('196') and tb1.type = 'AA' and TO_CHAR (TRIM (unit)) = "130".

    and year = '20'

    and tax > 0

    Group

    account

    order by

    account;

    SELECT

    To_char (Trim (Account)) Account_no,

    (select accountname in AddressBook where accountname addid = TO_CHAR (TRIM (account))),

    Sum(Fee/100) reciveable

    Of

    account tb1

    where

    obj in ('196') and tb1.type = 'AA' and TO_CHAR (TRIM (unit)) = "130".

    and year = '20'

    and tax < 0

    Group

    account

    order by

    account;

    SELECT

    Trim (Account) Account_no,

    (select accountname in AddressBook where accountname addid = TRIM (account)),

    Sum (case when fairy< 0="" then="" fee/100="" else="" 0="" end)="">

    sum (case where fees > 0 then charge/100 0 otherwise end) flow

    Of

    account tb1

    where

    obj in ('196') and tb1.type = 'AA' and TO_CHAR (TRIM (unit)) = "130".

    and year = '20'

    Group

    account

    order by

    account;

  • Dropdown menu with two rawValues

    Is it possible to have a drop-down list with two rawValues object?

    For example:

    John Smith is the display name and the rawValues are his email address and the expenses ceiling allowed (5000).

    [email protected], 5000

    If so, I want the $ 5,000 to appear in textfield1 and email address in textfield2. How can I access them?

    You can consider a table like a bit like using the instance numbers. The split() method puts each value in its own "slot" in the table. So to extract information about you just need to specify the location that you want to reference.

    In your case you can do with the loop you have only two values and just write them explicitly.

    var sElements = this.rawValue.split(",");

    email.rawValue = sElements [0]; first value

    dollar.rawValue = sElements [1]; second value

  • I have a HP 6510 b with a processor Celeron 2 Ghz. can I switch to a Core 2 Duo.

    I have a notebook 6510 b which currently has a Celeron 2 GHz inside. As the quickspecs indicates the Core 2 Duo processors for this model, I was wondering if I could upgrade to a Core 2 Duo processor.

    Does anyone know if this is possible. ?

    Thank you very much.

    Your mobile phone is compatible with the following Intel Core Duo CPU

    ● T7700 2.4 GHz processor 800 MHz front
    Side Bus (FSB) and 4 MB of L2 cache
    ● T7500 2.2 GHz processor with 800 MHz FSB
    and 4 MB of L2 cache
    ● T7300 2.0 GHz processor with 800 MHz FSB
    and 4 MB of L2 cache
    ● T7100 1.8 GHz processor with 800 MHz FSB
    and 2 MB of L2 cache

    reference source

    HP Compaq 6515 b Notebook PC and HP Compaq 6510 b Notebook PCMaintenance and Service Guide

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • Why many DELL notebooks still come with Windows 7?

    Hello

    I think to buy a DELL, probably the series Inspiron laptop.

    I see a lot of DELL notebooks still come with Windows 7 and it's even a filter criterion when you browse laptops at DELL.com

    There is 'Windows 7' and 'Windows 8 ' filters.

    DELL is not confident in Windows 8 or what is the reason?

    Also, if I buy a laptop today, would you advise me to choose Windows 7 Windows 8 and reasoning why?

    Thank you.

    Windows 8 has no XP mode and does not have a start menu and is not compatible with many other things. So no I don't see things at my disposal at any time.

  • I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

    I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

    How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • 0x8007048f error, cannot install Bluetooth Notebook Mouse 5000 with Windows 7

    Original title: Bluetooth Notebook Mouse 5000 install problem

    I am user of® Bluetooth Notebook Mouse 5000 with win 7 (Dell Studio) 1555.

    It can use before, when reinstalled window 7. There is an installation problem.

    The specifications may find the material but can't SNYC.

    problem code: "0x8007048f".

    How can I use it again?

    Hello

    Have you done a recent software or changes to the material on the computer?

    Method 1:

    I suggest you go through the steps mentioned in the link and check

    Connect a Bluetooth device that are neither require a TRANSCEIVER

    http://support.Microsoft.com/kb/952818

    Method 2:

    You may need to make your computer discoverable to Bluetooth devices, or configure Windows to notify you when a new device is trying to connect to your computer. To do this, you need to control how your computer pairs with (connects to) Bluetooth devices.

    To control how your computer pairs with Bluetooth devices

    (a) open the control panel by clicking the Start button, then Control Panel.

    (b) in the control panel search box, type Bluetooth, and then click change Bluetooth settings.

    (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

    a. to make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

    When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.

    b. to allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

    c. to be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.

    For more information please visit the link below.

    Add a Bluetooth device or other wireless or network device: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

    Change settings for a Bluetooth compatible device

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

    Add a Bluetooth device or other wireless or network device: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

Maybe you are looking for

  • Want to 15 t k000 CTO (Energy Star): HP Envy 15t k000 CTO support m2280 ngff SSD?

    I just bought a laptop K000 CTO Envy 15 t and want to ADD an SSD as drive system. At the same time, I want to keep the original HARD disk in its place as a storage for photos and videos. I found a manual on hp.com and K000 model told a m2280 slot. So

  • iTunes Mediathek is gray

    Hello I wanted to add some songs from my iTunes to my Diashow Mediathek - but they are all greyed out... Can someone help me?

  • Tecra R840 WLAN sporadically not have access to internet or router

    Hello A few days ago I baught a Tecra R840. Everything works fine but the WLAN adapter. Basically, Internet works, but sporadically - especcially during downloading files - the wlan adapter loses the connection to internet/router. It is always connec

  • disable the preview of media center channel while recording

    Initially, I wanted to know if my W7 would also record other audio streams play when I recorded with WMC and I found that it records only the channel on the tuner is set and I can still use my speakers for other uses, that is great. I recorded severa

  • the LAST_VALUE function and forecasts

    Dear gurus,I need to return a result set with the last value from the last date of my contracts, table of projects; that later, I'll have to use this game to project values for the months remaining of my earnings forecasts.I don't seem to be getting