Similar Questions

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Satellite L750 sometimes lit with white screen after hibernation

  When I got the system, sometimes awake hibenate with white screen!

  I noticed, when this happened, 'toshiba eco utility' is frozen.
  So, I think that: Toshiba Eco Utility is crushed, put into hibernation system and the awakening of the race, but screen blink.

  This time I push the power button, the system go to sleep and next push is normally awake!
  I don't know why. I use this app Eco Utility, but I'll delete it.

  Anyone?

  You deleted the Toshiba eco utility of the system now?
  Did you notice the same problem when you Hibernate your laptop using other profiles of power?

• Problem with matrix/screen in Qosmio F55-Q502

  Hello

  For a few weeks, I have a strange problem with matrix/screen of my laptop.
  The matrix flickers very often - no matter if the power cable is plugged in or not.
  The screen is full intensity and all of a sudden it starts flashing - it gets darker, lighter, usually for a few / dozen seconds. It does when no one touches or when I'm working on it.
  This very annoying and making eyes tired - he does it very fast and there is few levels of screen brightness.

  In addition, sometimes the screen turns off - you can see what is on the desktop but the screen is very very dark (but not empty or completely off). No reason - sometimes just in the workplace, sometimes for example when I touch (not pull) the power cable between the laptop and the power supply.
  Then, the only way to return to normal brightness of screen id to close the lid just for half a second and open it
  -matrix comes on normally, but can 'turns off' moment later and I have to do it once more - sometimes even several times...
  After 'action' with cover screens it seems that nothing ever happens...

  Anyone an idea what is the cause of such behavior or how to diagnose in details?
  Or maybe solve this problem?

  Best regards
  300 m

  Sounds like the backlight or inverter fails, or there is a bad connection.

  Is the unit under warranty? Send it to an ASP for repair.

  You should avoid to repair yourself, the backlight is very high voltage!

• No screen after hibernation

  I have a Lenovo Ideapad Z580. It came with Windows 7 Home Basic 64 - bit Service Pack1 preinstalled. But he did not not no editor GPO in it. Whenever I typed gpedit.msc in the run window or the start menu, nothing appeared. After awhile, I upgraded to Home Premium using Windows Anytime Upgrade. The problem mentioned above still exists. Now a new problem of cultures. whenever I put in Hibernate my laptop, after hibernation there is no welcome screen. Without asking for password, it simply connects. What are the possible symptoms of this problem?

  Hello

  Editions of Windows 7 (Home Premium, Home Basic edition and Starter) do not come with Group Policy Editor. Only Windows 7 Professional, Enterprise and Ultimate editions come with the installed Group Policy Editor.

  For question regarding with the Welcome screen after hibernation, you can follow the methods mentioned below.

  Method 1:

  You can run the troubleshooter. Check out the following link.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:

  You can read the following article.

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  See also:

  Sleep and extended: frequently asked questions

   http://Windows.Microsoft.com/is-is/Windows7/sleep-and-hibernation-frequently-asked-questions

  It will be useful.

• Satellite U840-10 q - problem with brightness adjustment

  HI :)...

  I have TOSHIBA Satellite U840 - 10 q...

  After downloading new AMD graphics driver... (Automatically detect and install)...
  PC Download and install driver again all correct... but now I have problem with brightness adjustment.

  When I use kay for brightess nothing and when I want to do in the setting (place where is battery icon)... I did not there is possibility of change of light as before... :(

  Original pilot here on the TOSHIBA page... is too old... and mae AMD driver problem...

  Pls help me someone I can do...

  Hello

  > Original driver here on the TOSHIBA page... is too old... and mae AMD driver problem...

  I put t know how help you buddy the point is that the graphics card driver that is available on the page of the Toshiba driver is modified for mobile use and its recommended by Toshiba.
  Usually, you use this driver to make sure that the correct feature for laptop.

  Of course, you can try to use the other graphics card drivers, but in some cases, different version could lead to small different questions: in this case > problem with brightness control.

  However, you can try to install the graphics driver AMD/ATI driver Toshiba UE page but check the driver released for other series of laptop. You might get a more recent version of the driver.

  Brightness last but not the least similar problems could be value added Package update (for Win 7), but also the BIOS update (if available)

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• AMD Radeon 7570-devices is not compatible with Windows 10 - you're going to have problems with your screen

  Microsoft will come out with Windows 10, as an upgrade of the free operating system next month, July 29, 2015. They came out with an app, 'Get Windows 10', which is intended to help the operating system upgrade process. In this app, it checks for compatibility issues that may exist between your computer and their new Windows 10.  I get results for two of compatibility issues when I run this app. The one that concerns me, it is with the video card that came with my computer, AMD Radeon HD 7570.

  The app tells me: "these devices are not completely compatible with Windows 10" and he adds "you will encounter problems with your screen."

  Is there any driver updates that resolve this problem?

  The driver, I installed on my pc is Advanced Micro Devices, Inc. version 8.960.11.2000

  Windows says that the driver is up-to-date.

  If no driver is available to correct this problem will be I need to replace the video card in my computer and if so with what?

  I currently use two screens, a LG 22EA53 (analog) and an Acer S230HL without any problems with Windows 7, Home Premium, Service Pack 1.

  Malygris1,

  Well, son of a gun... looks that microsoft has made changes in their updates.

  Now when you run the "'get 10 app Windows, check your PC ' it reads in devices..." "0 problems found."

  Looks like Microsoft do with last-minute changes, as you indicated, and others have mentioned about being patient on this matter, that they may (?) have addressed this problem.  Probably won't suddenly course up until the update is done.

  Guess for now, I have to score this as accept as a Solution.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Problem with switching screens

  Hello, I have a problem with switching screens. Here is my code (both screens extends screen):

  SerializableAttribute public class Main extends UiApplication {}

  Private TrainLinkScreen trainLinkScreen;
  Private WorkingScreen workingScreen;
  private string;

  Public Shared Sub main (String [] args) {}
  new hand (.enterEventDispatcher ());
  }

  public Main() {}
  workingScreen = new WorkingScreen();
  pushScreen (workingScreen);

  try {}
  trainLinkScreen = new TrainLinkScreen();
  } catch (GpsException ex) {}
  message = ex.getMessage ();
  } catch (FileException ex) {}
  message = ex.getMessage ();
  }
  If (message! = null &! message.equals("")) {}
  invokeLater (new Runnable() {}

  public void run() {}
  Dialog.Alert (message);
  System.Exit (1);
  }
  });
  } else {}
  popScreen (workingScreen);
  pushScreen (trainLinkScreen);
  }
  }
  }

  The problem is that the workingScreen is not displayed. The download takes a little time, so I wanted to put here a screen like "I work, please wait...". ", but he appears, the unit freezes for a few seconds and then the trainLinkScreen appears. Could someone please write where is the problem? I tried invokeLater on the first screen, but it ends with the crash on popScreen (trainLinkScreen). I tried invokeLater on trycatch also block, but it does not work either. Help, please.

  Thank you. I already have the solution (I hope that ), I put to device gps location in a separate method (it's a small part of the code that does not have too much time to finish), she called before initialization and initialization in method invokeLater as a thread (the large part, too download from the internet). The display works perfectly in this way (in the first place, the "Download" screen appears and then comes the rest of the code) Although some other things seems to not work properly now

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• did someone had problems with lightroom 5 after installing Mac OS El Capitan?

  did someone had problems with lightroom 5 after installing Mac OS El Capitan? the images are well n the library but darken when I switch to develop fashion

  It's a shame that you did not check for problems before you can update your Mac

  First, see if the update to the fixed bug Mac 10.11.1 will help you

  -an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008

  -In ADDITION the need to update the drivers nVidia (links included in the message)

  -There is also 'a' mention of an another 10.11.2 bug fix tested by Apple

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

  -There is also a link on the video display problems in Premiere Pro

  - and many other programs... MORE Microsoft Office also has problems

  More official Adobe help pages listing problems Mac 10.11

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-and-El-Capitan-Mac-OS-10-11.html

  http://blogs.Adobe.com/PremierePro/2015/10/Premiere-Pro-CC-and-Mac-OS-x-10-11-El-Capitan.h tml

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-and-El-Capitan---Mac-OS-10-11.html

  http://blogs.Adobe.com/audition/2015/10/audition-CC-and-OSX-10-11-El-Capitan.html#.VjjYBtG raUk

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.