Hi, we bought chanane US for our Organization. Earlier I managed to set up the US proxy on firefox. But since last approximately 1 month, it doesn't seem to work.

Similar Questions

• I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him. However, the phone doesn't seem to work. Also I don't have apple care more.

  I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.

  You will pay full price for a new iPhone.

  Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support

• How can I remove the button from menu? The custom option doesn't seem to work for this.

  How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].

  The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.

  Hi, I can not recommend that you do, but if you are really determined, this article can help.

• I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  Please see that.

• My spellchecker of Firefox doesn't seem to work; in fact I don't know that there is. I have a hotmail account, and when I try to use the spelling corrector for hotmail I get a message saying that I am using a browser with a built-in spellchecker. Where De

  My spellchecker of firefox doesn't seem to work; That's assuming that it exists at all. For example, when I misspell a Word when you compose an email using hotmail and I try to correct using the spell checker of hotmail, I get a message saying that I am using a browser that has of own built-in spellcheck. If it is integrated, how the hell can I find?

  This has happened

  Each time Firefox opened

  Is as far as I know, always

  You must install a spelling dictionary, only the US version comes with a dictionary.
  https://addons.Mozilla.org/en-us/Firefox/language-tools/

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• can I select a default font for menus dvd-'apply to all '. 2 selection doesn't seem to work.

  in Pre12 should I do to select a font by default for menus dvd-'apply to all... '. 2 selection doesn't seem to work. I want to use times new roman for everything and it's a pain scroll through the list of fonts for each title.  OR Alternatively - delete a large number of fonts in the list?

  grantham8

  What version of Premiere Elements you are using and on what computer operating system is running?

  The answer to your question "Pre12 can I select a default font for menus dvd.

  as I see that's no (any version).

  These are fonts, fonts siize and font color in the PSD file of the theme that is being back from the movie first elements Menu customization area. Either:

  a. do you the menu customization possibilities they present

  or

  b. If you want to than this menu always present with all by using the desired font, and then change PSD file of the theme on the hard drive (with Photoshop CS or higher).

  It is my understanding that Premiere Elements uses the fonts are fonts of Windows. Even if you could selectively delete all fonts in a given menu, I think that the end result would be a menu that didn't work rather than one that is lacking in your policy of survival because there was no other to select.

  Yet once, the police of a particular topic is predetermined by the police which was designed in the .psd for the menu file.

  If you want information on how to change the fonts of your theme at the .psd level, let me know the involved menu and details the police change., point by point, buttons, titles...

  Please review and consider.

  Thank you.

  RTA

• I just bought 14 items for my PC.  I'm trying to find the tool history brush in the Toolbox, but can not find the tool Panel.  HELP!, I just bought 14 items for my PC.  I'll try to find the tool history brush in the Toolbox, but cannot

  I'll try to find the Brush tool that is supposed to be in the tool Panel, but I can't find the tools Panel.  I just bought 14 items for my PC.  Also, I want to be able to have several photos to the top at the same time so I can move something from one photo to another, but I didn't understand how to do this.  I had worked with 10 items.  It's quite confusing to me.

  Chantig1 wrote:

  I'll try to find the Brush tool that is supposed to be in the tool Panel, but I can't find the tools Panel.  I just bought 14 items for my PC.  Also, I want to be able to have several photos to the top at the same time so I can move something from one photo to another, but I didn't understand how to do this.  I had worked with 10 items.  It's quite confusing to me.

  I could be wrong, but I think the tool 'tool shape history' exists only in the full Photoshop...

  My advice is to use the help file (in online or download the manual pdf https://helpx.adobe.com/pdf/photoshop-elements_reference.pdf)

  The interface has been changed in version 10, and you'll save time by looking at the different tutorials about it.

  The tool options palette is on the background, you can open it in the horizontal icon bar: second icon of the tool option palette or a first for the photo tray.

  Look at the menu display to choose how view several files at the same time. There is also an option in the menu Edit/Preferences to "allow the floating windows in expert mode.

  To move one photo to another, you can use the photobin to drag a photo to another already open in the display panel. You can also drag layers in the layers panel to another picture displayed.

• No driver win 7 for my HP Laserjet 1000. Compatibility mode doesn't seem to work, either for Win XP SP2.3 Vista

  How can I get the drivers for my HP Laserjet 1000, the manufacturer refuses to support. Don't seem to be able to get the compatibility either. don't want to buy a new printer - this one is good for years yet! Thanks in advance
  Kimig

  Hi Kimig,

  Sorry you're having problems with your printer driver. The link that gave you Vijay was the correct link by HP to download the Windows 7 drivers for the printer HP laserjet 1000. If these don't work no please let us know.

  In addition, please keep in mind due to the extreme number of devices that are made for Windows platforms, it is not possible for Microsoft create drivers or to put pressure on the companies for each hardware device that was created. If the driver does not work as shown on the HP site please contact HP and see if they have a newer driver for your pritner other than what was released on September of 2009.

  I hope this helps. Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista & check for box Windows Update doesn't seem to work

  Hello, (Specs: Microcomputer HP/Compaq with Vista Home Premium, SP2)

  The Windows Update control box seems to go nowhere.  Keeps audit and some never... no results.  I run FIX - IT, and he did of bugs.  Then restart and try again CheckUpdates.  Same thing.  And also, the "most recent search for updates" and "updates have been installed" two say '' never. ''  If I seem to have lost everything that was installed or checked in the recent past.

  FIX - IT has deleted the ones?

  I ran also malaware program and the program McAfee (that comes with my subscription to AOL) and clean disk.  Then tried the FIX - IT and re-run check updates.  I have received many downloaded and installed a few of them because so many updates were available at that time.  I'm going to install one or more other, but who has not installed.  Just kept running in mode installation, running and running, nothing happens.  I tried to re-boot, FIX - it again...   So now I'm back on the State 'never '.  Updates Windows to check once more runs from nowhere for the last 4 hours.

  (I even tried before execution with Firewall disabled, just to see what would happen.  I turned back.)

  I noticed that the computer activity light is very minimal (1 flashes every 10 seconds approximately) that check the update is running.  That the light should be blinking a lot?

  I also do not know what to do at this point.  The update service is not running.

  Thank you.

  updated-what precedes has worked once for a small set of downloads. (I had changed and reduced the amount of updates installed to shorten the waiting time for results)  When I went to install several updates, it did not.  I ran the Fix - It again and lost all facilities.  After a few attempts, Fix - It is not helping.

  Then I went through this series (a few ideas from another thread of discussion, rest are mine).

  I cleaned the computer - clean disk, then my regular analysis of McAfee, then tried Malawarebytes program (nothing was found by any program scans, fyi) and then defragment the drive.

  After that, several Windows updates appeared.  I installed Windows, not Microsoft software updates only those related to programming (I think that's what I did.)

  And then install it worked and have stayed.  I'll check for another batch of updates installed as I imagine that there must be more, because I lost all the others who were there before the Fix - It.

  I don't really know what the sequence preceding really helped and enabled the victory. Update service works.  But it's good for now.

  Best of all.

  M

• I bought Lightroom 6 for MAC somw earlier. Now, thanks to a system remains, I can't install LR6 more. Installation stops with an error message: The Adobe Support Advisor was discontinued the Adobe Support Advisor tool served to ana

  Does anyone have an idea what to do?

  Thanks in advance

  If the error mentions the installation program was unable to initialize:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• I updated Firefox and so the loss of use of Roboform. RoboForm is essential for online work. I wait for an update, contact Roboform or go back to the previous version of Firefox?

  I apologize. Suddenly, as I log in Mozilla to ask this question, I noticed that the Roboform toolbar is visible and active. I don't understand this. During the update of Firefox (I have now version 5), I was warned that Roboform would be disabled.

  RoboForm probably automatically installed an update for Firefox 5.0.

• Looking for 1 table D doesn't seem to work.

  I get the RS232 for light strings to the top / bottom presses and releases of a display.

  So I get UPP and UPR which translates pressed and released UP and same goes for the brightness decrease, DNP and DNR.

  However, D table 1 research does not seem to recognize one of these and just returns-1 instead of the number appropriate for the following case.

  Orders received include the CR - LF termination, while the elements of the array only. You must extract the first 3 characters of the received channels.

• Is it possible to make a full crop? 1 x 1 doesn't seem to work for that

  I'd rather not get into Photoshop to make a culture of free hand, it is not for the printing of the entire internet.

  1 x 1 can be manipulated in some way?

  Thank you

  Greg

  If you click on the "lock" in the crop tool icon, so, it seems to be unlocked, you can do a full harvest

• Stretch script for time so layer out-point is set at the time of model determined.

  Hello world!

  After doing some reading on the documentation and thinking through this problem, I thought I would ask some advice.  I'm curious to know if it is possible with ExtendScript, temporal layer such as its land to outpoint s on a point determined in the timeline panel.  I see that we set the value of a layer .stretch property, but I guess I wan to know if there is a way of thinking that this percentage is based on where I want the layer .outPoint meet.

  Let's say I have a layer including inPoint starts at 0 and out-point ends at 5.  Now, let's say I want to stretch the negative layer so the out-point ends at 3.25.  What is the best way to determine the stretch value for the layer?

  Thank you
  Arie

  I guess it depends on how general you need, but for the situation you described, perhaps like this:

  var layer = app.project.activeItem.layer (1);

  var d = layer.outPoint - layer.inPoint;

  Layer.Stretch = (3.5/d) * 100;

  Dan