Hibernate error 0xc000000d

Similar Questions

• Unalbe to startup: Error: 0xc000000d - how to backup the State of no boot ├a

  My computer will not boot, not even in safe mode, it keeps flashing error code: 0xc000000d - an unexpected error has occurred.

  My computer is a Samsung NP-R20Y with Samsung recovery 2, I tried its basic function of restoration but it doesn't work. I don't want to use the full restore because there are some data that I have not saved.

  I tried using the recovery of Microsoft disk downloaded from the internet and after a mistake of fixing and using other functions such as system restore and startup repair and also try start command line repair but nothing doesn't work and still the same error message.

  I think do a full restore now, but I don't want to lose all the data, is it possible to back up my data to an external drive such as a USB key using the command prompt?

  If not, is it possible to restore the Boot Manager?

  Please help and thank you

  original title: error: 0xc000000d - unexpected error occurred __How to back up my files, even when the computer cannot start, but have access to the command prompt

  Data recovery:

  1. slave of your hard drive in another computer and try to read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and try to read/save from there.

  3 Alternatively, try to use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When finished, turn off the system and remove the USB

  See you soon.

  Mick Murphy - Microsoft partner

• Session "Microsoft Security Essentials OOBE" stopped because of the following error: 0xC000000D using win 7 32 bit

  I get this error in my Event Viewer and I deleted a few weeks ago Microsoft Client Security Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D and this one too Session "Microsoft-Windows-Setup" stopped because of the following error: 0xC000000D

  Navigate to C:/program data/microsoft/microsoft security essentials/support /, locate the file: "MSSEOOBE.etl" and just delete. Restart the PC, the file will be re-created and all should be well.

  I've seen it come back sometimes, but mostly, who takes care of her.

  SC Tom

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Instalation of Win 7 by USB - Windows error 0xc000000d was able to start

  I am running a fresh install of Win 7 in. of USB and when the boot from USB, I get this error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \EFI\Microsoft\Boot\BCD

  Status: 0xc000000d

  Info: an error occurred trying to read the boot configuration data.

  This is a new laptop with Win 10 preinstalled. The BIOS is the UEFI mode.

  I need Win 7 because some software that I use for my work has not been tested with Win 10.

  A system UEFI-based systems, you must disable the Secure Boot UEFI in order to use Windows 7.

  To learn more:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  In addition, you can dual boot instead:

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

• Hibernate error in algorithm using SDK "could not resolve property.

  Hi friends,
  I'm trying to create retrieve a characterstic of premiseGeographicLocation value using the premise id and geotypecode as Fallows...
  
  Code:
  
  {} public void invoke()
  validateInput();
  validateSoftParameters();
  
  Bill = This.billSegment.getBillId () .getEntity ();
  Premise_Id premise_Id = this.billSegment.getPremiseId ();
  String premiseid = premise_Id.getIdValue ();
  Query query = createQuery ("from pgl PremiseGeographicLocation where the pgl.premise.id =: premiseId and")
  ("pgl.geographicType.id =: pgeocd");
  query.bindId ("premiseId", premise_Id);
  query.bindId ("pgeocd", Whimsy);
  query.addResult ("geographicValue", "pgl.geographicValue");
  String sectionValue = ((String) query.firstRow ()) m:System.NET.SocketAddress.ToString ();
  docNumber = sectionValue + "12345";
  Logger.Warn ("Bill Number is" + Number);
  addCharacteristicsToBill (this.billNo, this.docNumber);
  
  
  
  Error:
  =====
  
  SPL - 1-204-045616 2011-06-03 11:12:42, 620 [Player: Thread Parent-29] INFO (support.cobol.CobolSQLDeferredInserts) SQL COBOL delayed Insert batch processing is disabled
  *******************************
  Bill CharactersticCharacteristicType__ [BILLNO]
  *******************************
  *****************************
  PREMIS id in CMBILLNO is Premise_Id (7305591040)
  *****************************
  *****************************
  GEO Type Id is GeographicType_Id (SECTION)
  
  *****************************
  
  
  
  SPL - 1-204-045616 2011-06-03 11:12:43, 064 [Player: Thread Parent-29] ERROR (support.impl.QueryImpl) hibernate query creation ' of pgl PremiseGeographicLocation where pgl.premise.id =: premiseId
  and pgl.geographicType.id =: pgeocd'
  org.hibernate.QueryException: could not resolve property: premise of: com.splwg.domain.customerinfo.premise.PremiseGeographicLocation__ [select pgl.geographicValue from com.splwg.domain.customerinfo.p
  discount. [Pgl PremiseGeographicLocation__ where pgl.premise.id =: premiseId and pgl.geographicType.id =: pgeocd]
  at org.hibernate.persister.entity.AbstractPropertyMapping.propertyException(AbstractPropertyMapping.java:44)
  at org.hibernate.persister.entity.AbstractPropertyMapping.toType(AbstractPropertyMapping.java:38)
  at org.hibernate.persister.entity.AbstractEntityPersister.toType(AbstractEntityPersister.java:1358)
  at org.hibernate.hql.classic.PathExpressionParser.getPropertyType(PathExpressionParser.java:269)
  at org.hibernate.hql.classic.PathExpressionParser.token(PathExpressionParser.java:150)
  at org.hibernate.hql.classic.WhereParser.doPathExpression(WhereParser.java:347)
  at org.hibernate.hql.classic.WhereParser.doToken(WhereParser.java:382)
  at org.hibernate.hql.classic.WhereParser.token(WhereParser.java:263)
  at org.hibernate.hql.classic.ClauseParser.token(ClauseParser.java:86)
  at org.hibernate.hql.classic.PreprocessingParser.token(PreprocessingParser.java:108)
  at org.hibernate.hql.classic.ParserHelper.parse(ParserHelper.java:28)
  at org.hibernate.hql.classic.QueryTranslatorImpl.compile(QueryTranslatorImpl.java:216)
  at org.hibernate.hql.classic.QueryTranslatorImpl.compile(QueryTranslatorImpl.java:185)
  to org.hibernate.engine.query.HQLQueryPlan. < init > (HQLQueryPlan.java:77)
  to org.hibernate.engine.query.HQLQueryPlan. < init > (HQLQueryPlan.java:56)
  at org.hibernate.engine.query.QueryPlanCache.getHQLQueryPlan(QueryPlanCache.java:72)
  at org.hibernate.impl.AbstractSessionImpl.getHQLQueryPlan(AbstractSessionImpl.java:133)
  at org.hibernate.impl.AbstractSessionImpl.createQuery(AbstractSessionImpl.java:112)
  at org.hibernate.impl.SessionImpl.createQuery(SessionImpl.java:1623)
  at com.splwg.base.support.impl.QueryImpl.createHibernateQuery(QueryImpl.java:410)
  at com.splwg.base.support.impl.QueryImpl.createNormalHibernateQuery(QueryImpl.java:428)
  at com.splwg.base.support.impl.QueryImpl.getHibernateQuery(QueryImpl.java:355)
  at com.splwg.base.support.impl.QueryImpl.iterate(QueryImpl.java:217)
  at com.splwg.base.support.impl.QueryImpl.firstRow(QueryImpl.java:235)
  at com.splwg.cm.domain.cmbills.CMBILLNO_Impl.invoke(CMBILLNO_Impl.java:66)
  to com.splwg.cm.domain.cmbills.CMBILLNO_Impl__. CGLIB$ call$ 0 (< generated >)
  to com.splwg.cm.domain.cmbills.CMBILLNO_Impl__$ $FastClassByCGLIB$ $2209fd3f.invoke (< generated >)
  at net.sf.cglib.proxy.MethodProxy.invokeSuper(MethodProxy.java:167)
  at com.splwg.base.support.interception.BusinessMethodInterceptor.intercept(BusinessMethodInterceptor.java:84)
  com.splwg.cm.domain.cmbills.CMBILLNO_Impl__.invoke (< generated >)
  at com.splwg.base.support.algorithm.AbstractFromCobolAlgorithmWrapper.invoke(AbstractFromCobolAlgorithmWrapper.java:42)
  at com.splwg.ccb.domain.admin.customerClass.CustomerClassBillSegmentFreezeOrCancelAlgorithmFromCobolWrapper_Gen.invoke(CustomerClassBillSegmentFreezeOrCancelAlgorithmFromCobolWrapper_Gen.java:)
  55)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)

  Hello
  You can try with Query query = createQuery ("from pgl PremiseGeographicLocation where the pgl.id.premise.id =: premiseId and")
  ("pgl.geographicType.id =: pgeocd");

  Thank you
  Sharath

• Tecra M5 won't Hibernate - error message

  Hello

  I have problems with my laptop Toshiba Techra M5. It will not go into hibernation.
  He comes back with the following error message:

  The device driver for the "standard 101/102 - Key or Microsoft Natural PS/2 Keyboard" device is preventing the computer from standby. Please close all applications and try again. If the problem persists, you may need to update this driver.

  Can someone help me please?
  How to update this driver?

  Thank you very much
  Ben.

  Please check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15919&MessageID=58159

  This should help you solve this problem.

• WIN8 - error: 0xc000000d - recovery

  I bought a Ultrabook of Acer, Aspire m5 - 581 t (g), with 8 Windows pre-installed on the ultrabook of the plant, already. Used normally for about a week, and one day the car since the touchpad stopped working. I rebooted the system, and she came back to work without any problems. After I used the ultrabook this day I liquidated it down without making any change, nothing to install etc, and when I turned it back again, I got a blue screen with the following message:

  "Recovery".

  Your PC needs to be repaired

  The Boot Configuration data file is missing some information required.

  File: \BCD
  Error code: 0xc000000c

  You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the manufacturer of the PC. »

  I tried to boot the system with the Win8 and WinXPsp3 CD and both worked. Aparently all command from the keyboard as ALT + f10 and others work and the ultrabook doesn't recognize any CD/DVD/USB driver.

  What should do? Need to find a way to Prime the system. Please help, waiting for the answers.
  Here is a picture of the blue screen.
  Attentivelly, Jack.

  

  Hi Priscilla,.

  Provide installation of Windows 8 media, or create installation media by following the steps in http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

  Once you have the disc, follow the above steps and attempts to reconstruct the configuration of startup (BCD) Data.

  Let us know the results.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• I get the thesis of my observant event log errors.

  I get the thesis of my observant event log errors. Please help me find a solution for the errors I have thanks. On the correction of errors please send me web links to solve problems.

  1. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  2. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x0800270004C2 address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  4. dynamic link libraries custom are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  5 resolution of names for the name officecdn.microsoft.com expired after none of the servers configured DNS responded.

  6 WLAN AutoConfig service has stopped successfully.

  7. The ICS_IPV6 failed to allocate _ bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  Log name: Microsoft-Windows-Dhcp-Client/Admin
  Source: Microsoft-Windows-Dhcp-Client
  Date: 19/02/2015 04:27:17
  Event ID: 1001
  Level: error
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  You can remove the error by following the advice of 4468mt in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/EventID-1001-DHCP-your-computer-was-not-assigned/2b5227e0-8171-E011-8dfc-68b599b31bf5

  Log name: Microsoft-Windows-Kernel-EventTracing/Admin
  Source: Microsoft-Windows-Kernel-EventTracing
  Date: 19/02/2015 04:25:11
  Event ID: 3
  Level: error
  Description:
  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  See the following link for a solution:
  https://social.technet.Microsoft.com/forums/Windows/en-us/0c942bd9-47ad-4897-a5c2-485cc9fe681f/Microsoft-Security-client-OOBE-stopped-due-to-the-following-error-0xc000000d?Forum=w7itprosecurity

  Log name: System
  Source: Microsoft-Windows-Wininit
  Date: 27/02/2015 03:34:33
  Event ID: 11
  Level: WARNING
  Description:
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  This report of warning is ignored. Only occasionally do you see event ID: 11 reports that reveal an unwanted guest when the computer is started.

  Log name: System
  Source: Microsoft-Windows-DNS-Client
  Date: 24/02/2015 22:51:01
  Event ID: 1014
  Level: WARNING
  Description:
  Name resolution for the name of officecdn.microsoft.com has expired after none of the servers configured DNS responded.

  This report of warning is ignored. The frequency with which this report occurs varies from one computer to the other depending on the quality of the internet connection. They are usually indicative of a temporary problem and if not all computers are located in the most, Event Viewer system log.

  Log name: System
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 18/02/2015 23:39:07
  Event ID: 4001
  Level: WARNING
  Description:
  Autoconfiguration WLAN Service has stopped successfully.

  This report of warning is ignored. These reports are generated every time that the computer starts shutdown.

  Log name: System
  Source: Microsoft-Windows-SharedAccess_NAT
  Date: 19/02/2015 04:25:19
  Event ID: 34005
  Level: WARNING
  Description:
  The ICS_IPV6 failed to allocate

  bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  This report of warning is ignored.
  https://support.Microsoft.com/kb/2550111?WA=wsignin1.0

  You have no reports of significant error in your event viewer system log.

• blue screen error and the memory of dumping

  Dear all,

  Beyond 20 days before my knees worked well, with any problem.

  OS: win 7 home.

  recently I updated all the patches update.that time Windows first problem started in the MSE.

  Error: Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  Due to this blocking of the system frequently. some time system starts window in a few second, or after the windows login began with a few min.and then memory dump and the blocking of the system and blue sceen dump.

  while I removed the MSE and also checked, after that also are having problems.

  Help reslove the issue.

  Please find the shared memory dump

  https://SkyDrive.live.com/#CID=F1D72CACC8DEB263&ID=F1D72CACC8DEB263%21126

  As well as the problems of now some think like this as follows,

  A fatal hardware error occurred.

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: internal Timer error

  Processor ID: 4

  View details of this entry contains more information.

  Hi Er.Nirmal,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Error messages in Event Viewer

  I get the following error messages in EV, please help to decipher and all the solutions, thank you:

  1 - system shutdown prior to 29/01/13 to 18:14 was not planned.

  2 - the system has rebooted without clearly stop the first. This error can be caused if the system is not responding, crushed, or lost power unexptedly.

  3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D.

  4 audit events have been abandoned by public transport. 0

  5 - the SNMP Service encountered an error when accessing the registry SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration key.

  6 - the computer has restarted after a bugcheck.  The bugcheck was: 0 x 0000000024 (0x9f693698, 0x9f693270, 0x001904fb, 0x8af32c51).  A dump was saved in the: C:\Windows\MEMORY. DMP.  Report ID: 012913-25890-01.

  7 - the print spooler cannot start because the PrinterbusEnumerator could not start.  Error code 0 x 490.   This can happen due to instability of the system or a lack of system resources.

  8 - custom dynamic link libraries are loaded for each application.  The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  9 - the next (s) start or system start could not load:

  amacpi

  mssmbios

  I am particularly concerned about #8 - libraries of custom applications loading dynamic links...  (doesn't look good)

  I might suggest that your support align more closely the event viewer, since this is a descrept of the activity log, and that it be made possible to COPY the EV, WHO SHE does APPEAR TO BE POSSIBLE CURRENTLY.

  Anyway, your help to clarify and solve these problems is appreciated.

  Hi Al Adams,.

  Welcome to the Microsoft Community and thanks for posting the question.

  From the description, it seems you are trying to find errors in the Event Viewer logs.

  Files related to the way Windows dynamic link library communicates via the network and the Internet, most often related to Microsoft Outlook applications

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error. As soon as these types of events occur, Windows records the event in an event log that you can read by using Event Viewer.

  It would be great if you can answer this question in order to help you further.

  Are you facing any problem with the operating system?

  Reference: http://windows.microsoft.com/en-IN/windows7/What-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful, if you have questions/suggestions more associated with Windows do not hesitate to post and we will be happy to help you.

• Windows 8 (iaStorA.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL error is constantly on

  Recently, my hard drive was in place and so I ordered a replacement of HP, to replace the hard drive, whenever I shut down the computer, put it to sleep or Hibernate error drIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys) appears. I think this could be a driver of some sort problem, because the hard drive is new, but I don't know where to find the drivers. It is perhaps not yet a driver problem so I don't know what to do to fix.

  Techguy

  Almost all of them were iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp and your Symantec.

  I would update to the latest driver Iastor.sys (and if you are running an SSD firmware update) and remove Symantec and use the built in Defender in his place.

  

• Why did Windows 7 freezing when using Firefox?

  S ' went for months now with many attempts to identify the cause. Came to the conclusion that it is Firefox but can't understand why.
  -If you use Firefox, my whole PC, not only Firefox freezes. Sometimes in the first 5 minutes of use of Firefox, other times it can happen an hour in a session. A hard reboot is the only way to get back to my Office I waited an hour before, after a freeze and nothing happens. The mouse pointer move, nothing.
  D ' first thought it was a hardware problem or a problem of antivirus protection.
  -Reinstalled windows on three different hard disks that all have the disk check. Still happens
  -Installed windows 8 to see if this could solve the problem. Nope, did the same thing on Windows 8.
  -Ran Memtest 86 + 14 hours overnight to see if it was my memory. No, zero found errors of memory
  -To be sure I even tried to use only a strip of ram in my PC at the same time to see if the chopsticks were bad. No, it froze with each stick
  -Tried to change my anti-virus. He froze with every single one, AVG Free, Avast free, Microsoft Security Essentials.
  -J' realized that my PC freezes only when I'm on the web in firefox. If I use chrome or Internet explorer, it doesn't happen. These total PC freezes happen when I use firefox.
  -My only adds on / plug that I use is Adblock more and more those who come with default Firefox.
  -My firefox is updated, I reset and reinstalled [everything by adding only Ad Block +] and again, this does not solve the problem
  -In the event log window, the only thing that happens every time my PC freezes is the error "Session"Microsoft Security customer OOBE"stopped because of the following error: 0xC000000D", why this would affect Firefox, I don't know.
  -I would like to understand the cause of this because I really want to use Firefox again.

  I finally understood that Firefox isn't the problem with this problem, but it's actually the Nvidia drivers. It's a shame as Nvidia pushes the hard driver updates. Drivers to eliminate this problem are 314.22. After you have uninstalled the latest drivers and replacing them with 314.22 I did have the problem at all in any program, including Firefox.

  Here's a thread from Nvidia on the issue.

  https://forums.GeForce.com/default/topic/596642/GeForce-drivers/please-help-event-ID-14-from-source-nvlddmkm-cannot-be-found/2/

  I had to replace a lot of my material before I figured out it was the Nvidia drivers because I don't have the correct error message on my old set up which pointed me in the direction of the video card.

  If someone has this problem I highly recommend demotion to 314.22 driver version if you have a Nvida GPU in your system.

  I'm very disappointed in Nvidia for not solving this problem after 15 + updated since 314.22 driver.

• EliteDesk 800 G2: SSD will allow only boot UEFI and not appear as a legacy boot option.

  Hello

  My company is the purchase of HP EliteDesk 800 G2, some comes with HARD drive and some with SSDS.

  Deploy us Windows 7 x 64 using SCCM using legacy startup.

  On a machine with installed HARD drive, I can configure the startup options to use legacy boot, but when I replaced the drive to an SSD the only option to start for this drive is UEFI.

  This causes the deployment fails because the player needs to be partitioned as TPG.

  On the other hand, if I disable the legacy, the UEFI boot PXE boot and partition the drive as GPT, after the deployment of a disk image is unable to start with error 0xc000000d (I guess that the cause is supported in Windows 7 because it does not work on Windows 8.1).

  Bottom line, I can install Windows 7 on a HP EliteDesk 800 G2 only if start legacy is enabled and I have partition the drive as UEFI.

  Is it possible to force the SSD at startup like legacy and not UEFI?

  This problem results from the workstation or is it applied by the SSD?

  Thank you.

  Hi Jay,.

  I appreciate you are trying to help.

  I guess that there are some problems of communication because it is a business problem and there are other technical components involved that I don't understand.

  After some research more, it seems that this problem occurs with a specific model of SSD.

  We'll just have to wait for HP support.

  Thank you.