"Hibernate" mode

Similar Questions

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• Satellite A300D - 15 c - hibernate mode has disappeared

  I have a quite an old laptop Toshiba Satellite A300D - 15 c.
  First years everything worked fine. Ago about half a year in hibernation mode disappeared. Now when I press the sleep button just the screen goes black. But the computer remains switched on.

  How can I get to computer go at least in sleep mode?

  Can you offer more useful information please?
  What operating system do you use?
  You can use FN + F4 or FN + F3 key combinations?

  How do you know that hibernate mode has disappeared? Where does it lack?

• Hibernate mode does not work on my Satellite L650-1PE

  Hi all

  I have Toshiba laptop Satellite L650-1PE system (psk1je) & windows 7 32 bit & I updated the BIOS to version 2.40... so I can not put windows 'Hibernate' mode... the screen turn off then it turns on again!

  Y at - it an update or what I can do?

  Help please.

  Thank you

  .

  Hello

  Maybe you should enable hibernation, first:
  Do this:
  -Start CMD (control box) in search, type CMD and press ENTER
  -Type powercfg /Hibernate + it +.
  -Close the box and go to Advanced Power Options
  -In advanced options to sleep, expand the sleep tree and disable standby hybrid.
  -Now go back to the start menu and you will see the new entry into hibernation.

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.

• Impossible to use the system in sleep or Hibernate mode after installing a new video card

  Have a card GeForce 6200 graphics with latest drivers installed and now I can't use the features of standby or Hibernate mode in Windows Xp System.

  This seems straight - Stand By and Hibernate will usually be available if the video drivers are not updated.

  For your NVIDIA GeForce card, I would do this:

  The best way to reinstall the NVIDIA software is to visit the NVIDIA support web page and let your system and to recommend the best software for your system... or you can find the correct version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  When you have done, you can add a fourth "Hibernate" button to your menu to shut down the computer to prevent you from pressing the Shift key to Hibernate (which is good for lazy people like me).

• HP elitebook 2530p wake from standby or Hibernate mode

  Hello world

  I have a problem with my 2530p elitebook but I do not know how to solve it, please give me your suggestion. Here's the question:

  After placing the computer into sleep or Hibernate mode, it seems quite dead. The keys that are supposed to wake the computer have no effect. When I press the button to wake up the LEDs light up and the fans turns on but the screen remains black. Finally, I have to stop it using the switch, then start it again. I am running XP.

  I'm looking forward to your reply.

  See you soon,.

  M

  Try flashing the latest BIOS revision for your laptop, it seems the problems of sleep and hibernation. Before you do, check your BIOS revision when you start the configuration utility.

• my pc will only of "hibernate" mode on 'on' or 'sleep '.

  Hello all, anyone know why my pc will only of "hibernate" mode on 'on' or 'sleep '? I mean it opens during the night... I have windows vista...

  Hello

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need to reset the NIC wireless through troubleshooting whenever I brought back from sleep mode or Hibernate mode?

  My system information:
  -Microsoft Windows 7 Home Premium Version 6.1.7600 Build 7600
  -Toshiba Satellite A505
  -PC x 64
  -Intel Core 2 Duo T6600 @ 2.20 GHz 2200 Mhz 2 carrots 2 logical processors
  -Version/date bios: Insyde 1.70, 15/09/2009
  -smbios version 2.4

  The adapter information:
  Connection to the local network - Realtek PCIe FE Family Controller, updated all drivers, since I'm connected wireless but I guess it says "network cable is unplugged" is normal.

  Wireless network - Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC, put to update the drivers. It is disconnected, but disabled right out of the standby mode.

  Wireless network connection 2 - Microsoft Virtual Wifi Miniport Adapter, drivers updated. I've never installed it... or something... so I don't know why it's here, or what he does. This disappears when I put in sleep or Hibernate mode and then resume, but reappears after a repair. No matter what he always seems to say no 'connected '.

  Problem:
  Whenever I brought back from sleep mode or Hibernate mode, my internet connection is cut off. Trying to connect to my router, I have an error message and invites me to troubleshoot. I allow the computer to troubleshoot and it resets my wireless adapter, which allows everything to work once more. I ran an ipconfig/all using a Hibernate once and it seems that everything is disabled just before I run troubleshooting... "media disconnected". It is not a huge problem of having to run whenever I resume a session, but it's a boring troubleshooting.

  Failure of solutions:
  Updated all the drivers, when all drivers are always updated
  Disable "Allow the computer turn off the device" tab of power for all 3 cards, at the moment it is always disabled
  Disable ipv6 on all cards, at this time, it is always disabled.

  Interesting facts:
  "Microsoft virtual wifi miniport card knows driver or hardware related problems.
  This came after one of the sessions of troubleshooting... What is the microsoft virtual wifi miniport...?

  Sorry if I did not provide the correct information to help solve my problem... just tell my something else I should add :)

  I had the same problem on my laptop computer l500 do not know why it does this, but it was the case I have reactivated "Allow the computer turn off the device" tab power supply for my wireless adapter and it seems to work again.

  I think it worked because he wasn't let go out properly when I slept I hope laptop that yours is just as easy to fix

• Please could someone help me how to activate Hibernate mode

  Hello, please someone could help me how to activate Hibernate mode, I don't remember what I did but am surprised inactive hibernation sleep and research. I would be grateful to get this help. Thank you

  Original title: Hibernation Mode

  Hello

  This should help you:

  «"How to enable or disable the Hibernate in Windows 7 and Windows 8"»

  http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

  See you soon.

• Pavilion g6-1d21dx: long time driver or BIOS on Pavilion g6-1d21dx number may not resume from sleep mode or Hibernate mode

  When my g6-1d21dx Pavilion was still fairly new, Windows 7 has started to hang whenever I tried to resume from standby or hibernation, and I couldn't get back to work until I held the power button down to force the computer to restart.

  Now, I did a clean install of Windows 32-bit 10, and everything works fine, except for - big surprise - repeated from the previous day and hibernation. Windows 10 adds quick start to the mixture, which also does not work properly, probably because it's a similar feature.

  HP already explained the cause of this problem, or provided a fix? The BIOS I have is F.49, but the projection of BIOS newer on the product page is a F.48. Maybe I need to reduce my BIOS? I saw a post where someone has talked to return to F.46 to fix very similar if not same problem on another model of Pavilion g6. In any case, anyone who is familiar with this issue?

  More details:

  If the quick start is activated, whenever I put him computer have a BSOD and reboot. Usually, the error is unexpected_store_exception but I also had kernel_data_inpage_error a couple of times. The computer appears in the standby mode and Hibernate successfully, but when I try to resume it turns his wheels for a little while and then just restarts, usually without error message. For the moment, I have quick start disabled and sleep and Hibernate in my power options.

  Thanks for any relevant information.

  The solution for me was to install F.46 revision of the BIOS. I got F.49, and the latest version available on the support site is a F.48. I don't know if there is a downside to this...

• System will not go into sleep mode or Hibernate mode

  I have my laptop set to this mode on battery power:

  Turn off monitor: after 5 minutes
  Turn off hard disks: after 10 minutes
  Standby: after 15 minutes
  Hibernate: after 30 minutes

  However, I don't know if the system goes to sleep, if the hard disks are turned off or hibernate if she is asleep. This sequence will actually happen? Or should I only select one of them (according to the monitor) and let others like ever (except for the screen)?

  Original title: I'm confused on feeding management

  Hi Dhinged,

  You can try the following steps and check.

  Method 1: Run the next Fixit and see if the problem persists.

  The problems of power consumption and extend laptop battery life

  You can also check the following items and check:

  How to solve the problems of hibernation and standby in Windows XP

  Unable to use power management features

  Method 2:

  We will try to restore the default power mode and check. To do this, follow these steps.

  a. click Start, click run, type cmdand then click OK.

  b. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Also check out the following link:

  Power Options overview

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• XPS cannot switch to standby or Hibernate mode

  Hello

  I saw a similar post here, but I couldn't solve the problem...

  My Dell Studio XPS 13 has a strange problem:

  When I close the screen (it closes down), the computer is not enter standby or hibernation mode, and rather that the screen turns black. 'normal' in the keyboard lights stays on and lights side indicate that the computer is running always full power. You can say that on hearing the noise of ordinary fan.

  Trying to put it to sleep by start = > sleep/hibernate - the same thing happens - computer still works but the screen goes black.

  Basically, therefore it is blocked until I forced closure (by the close button).

  Should I update the BIOS? would it be useful?

  I use windows 7.

  Thank you...

  Hi oren_m,

  Please check the power options are set to sleep/hibernate for the option "when I close the lid. (See attached snapshot)
  If the problem persists, please reinstall the graphics driver. Enter the number of Service and the appropriate operating system and download the latest video drivers from the link below.

  http://Dell.to/T2hKYc

  

• Portege 4010: No Standby Mode and Hibernate mode

  Dear people,

  After you have reinstalled my P4010, I don't have the standby and hibernation Mode option more.

  I use Win XP pro, SP2, version 2002

  Any suggestions?

  Kind Ragards,
  Jasper

  Hello

  pass under the office-> Rightclick-> Screensaver-> power management.

  Here you can activate the hibernation and I think there must be a point was that you can activate the sleep mode (may be it is useful if you are installing your Toshiba tools).

  BR, Ben