Satellite A300D - 15 c - hibernate mode has disappeared

I have a quite an old laptop Toshiba Satellite A300D - 15 c.
First years everything worked fine. Ago about half a year in hibernation mode disappeared. Now when I press the sleep button just the screen goes black. But the computer remains switched on.

How can I get to computer go at least in sleep mode?

Can you offer more useful information please?
What operating system do you use?
You can use FN + F4 or FN + F3 key combinations?

How do you know that hibernate mode has disappeared? Where does it lack?

Tags: Toshiba

Similar Questions

  • Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

    Hello

    I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

    After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

    I tried to uninstall the manually, but I got the same message.

    These programs are;
    Setup driver Atheros
    Toshiba hardware configuration
    Toshiba supervisor password
    Realtek High Definition Audio Driver

    So I can't go ahead with the upgrade.

    Anyone know what could be the problem?

    Thanks in advance,

    Pouvez - TR
    .

    Hello

    Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

    Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

    If you did a recovery facility before the upgrade?

    Welcome them

  • Satellite A660-149 - utility of Tosh has disappeared!

    Someone PL help me to trace the utility depending on whether I had until recently on my brand-new Satellite A660-149, but now he has gone (maybe through a fault of mine).

    It took the form of a rectangle that would hide at the edge of the screen and would (unfortunately, most of the time) get out whenever the cursor struck its contour. One of the 3 buttons caused a box where you can select one of the options that have been predefined for display based on ambient lighting, one of these options are defined by the user.

    I found this utility useful to quickly change the settings of the screen whenever I had to move my laptop.

    I hardly had time to look into what we called this utility and where he lived, before that I've lost without trace.
    A price to everyone who helps me rediscover it?

    Hello

    I think you speak on flash card.
    The support of flash card utility controls the FN keys.

    You should go to all programs-> Toshiba-> supported Flash memory card and need to reboot again.

    If this will not help, reinstall the VAP and Flash memory card Support utility.

  • Satellite L500-1EU-CD/DVD drive has disappeared from the system

    The "PIONEER DVD - RW DVRTD09A" device (IDE\CdRomPIONEER_DVD-RW__DVRTD09A___1.50___\4&2f0449cb&0& 0.1.0) disappeared from the system without first be prepared for removal.

    This causes my system to hold on for about 10 seconds, then returns to normal. It is preceded by the error:

    The device, \Device\Ide\iaStor0, did not in the expiration time.

    What happens to little about 30 seconds before the shot

    My laptop is TOSHIBA Satellite L500 - 1EU PSLJTE. OS - Window$ XP SP3, all the drivers are downloaded from the TOSHIBA Driver download page @ http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

    Hello

    Have you also tried removing the upper and lower registry filters? All the CD/DVD drive associated programs such as Nero, installation of filters in the registry and can cause such problems.

    To remove them, follow this work around:
    http://support.Microsoft.com/kb/314060

  • on my program closed, the Hibernate feature has disappeared

    How can I get the Hibernate option on my closed proceedures.  I got it and all of a sudden he disappeared

    http://support.Microsoft.com/kb/928897

    I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

    http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    Read the info above to solve the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite A300D-15B - obtaining a recovery after the removal of score media

    Hello

    I'm trying to find a way to get the recovery CD/DVD for a Satellite A300D-15B. Recently, it has contracted a number of virus and become non-functional. I did not know the recovery partition of HARD drive and stupidly deleted recovery option while re-installing windows. The new facility, however, don't show the good drivers (of course) and is even the wrong version of Windows Vista, so the product key does not (Enterprise vs Home Premium). How can I get new media of recovery? I tried the Toshiba Web site but I did have a lot of luck.

    Thanks much for any help!

    Original Toshiba recovery disc can be ordered under https://backupmedia.toshiba.eu/landing.aspx
    Check it out.

  • Re: Satellite A300D-13 has: problems starting - starts not or only black screen

    Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

    If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

    In the Bios I have change the boot order of the sources (I can't change it much more)

    I am grateful for any kind of help.
    Thank you for your cooments in advance

    Hello

    The issue could be related to software, but also for the hardware problem.
    But first, we have to check if it s a software problem.

    You are using the original operating system preinstalled by Toshiba. Is this good?
    AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
    In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
    HARD drive recovery option can be used to reinstall and update the operating system.
    I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

    This option will start the recovery procedure and the BONES to relocate again.
    Please check if a new facility will improve the situation with Notepad.
    In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

    If this suggestion won't help you then whole notebooks material must be check by a local ASP.

  • CD/DVD drive has disappeared (TS - 802 (a) on my Satellite A200-TJ9

    Hey guys,.

    I'm having some trouble with my Satellite A200-TJ9.
    The DVD drive has disappeared earlier, done case disassemble the filter and it worked for awhile, but now it disappeared again.
    Tried uninstalling the drivers and reinstalling, but the drive does not appear in Device Manager, or even in the boot configuration menu.

    The reader will always spin discs and act as if it does not operate normally, but I have no way to access the disk.
    Any ideas?

    Thank you
    Garrick

    Hi garrick7,

    the drive is recognized in the bios?
    Otherwise, drive might have gone... or some may be defective electronic...

    If it is not recognized in the bios that the player could be dead. > change it.

    If she recognized correctly may be a software problem...
    Test it with a system-on-cd or try to boot from it.

    but I don't think that this problem is software partner...

  • What wireless chipset supports Satellite A300D-13 has?

    Please, what wireless chipset is in a Satellite A300D-13 has?
    Everything I saw in the ads is an 802.11 a/b/g/Draft-N. I need more details than that.

    I would like to know the wireless chip set, to help me make an informed purchase decision.

    I intend to put Linux on this PC, I need detailed information and wireless (for example, identifying information unique id provider/id device or other), as with the detailed wireless information, I can search and confirm the compatibility of Linux.

    Thank you.

    Hello

    I would say that this laptop was equipped with the Atheros WLan card and you have the Atheros WLan driver.

    Welcome them

  • Hibernate mode does not work on my Satellite L650-1PE

    Hi all

    I have Toshiba laptop Satellite L650-1PE system (psk1je) & windows 7 32 bit & I updated the BIOS to version 2.40... so I can not put windows 'Hibernate' mode... the screen turn off then it turns on again!

    Y at - it an update or what I can do?

    Help please.

    Thank you

    .

    Hello

    Maybe you should enable hibernation, first:
    Do this:
    -Start CMD (control box) in search, type CMD and press ENTER
    -Type powercfg /Hibernate + it +.
    -Close the box and go to Advanced Power Options
    -In advanced options to sleep, expand the sleep tree and disable standby hybrid.
    -Now go back to the start menu and you will see the new entry into hibernation.

  • Its has disappeared on the Satellite Pro A200 under Win XP

    I have A200 with Windows XP SP2. Everything was OK for 7 months.
    2 days ago, my sound has disappeared.

    It seems that everything is OK with the drivers... but there is NO audio device by default in "sounds and Audio Devices Properties".
    I need some advice what to do...

    Thank you...

    Restore the operating system to an earlier time using tool Systemrestore. I hope that this will be the easiest solution for you.
    Please let me know if it works.

    http://www.theeldergeek.com/system_restore.htm

  • Not always have connectivity LAN on my Satellite A300D

    Hello

    I have a problem on my new Toshiba Satellite A300D-168 and cannot find a solution, that's why I'm asking for help in the official Forum of Toshiba.

    Brief explanation of the problem:
    Whenever I plug the cable into the Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller Socket I can observe how the line under the area of network connectivity (it's "Netzwerkverbindung" in German, I don't know the exact equivalent on English Vista systems) switches beetween 'enabled' and "network cable has been removed" (again once I do not know the English equivalent but in German It's "Aktiviert" and "Netzwerkkabel wurde removed"). It happens every second. It is like a branch and unplug the cable all the time. As a result, fires, taking green flash every second, then they disappeared again (no green light constant).
    Logically, it is impossible to get a connection network because of this problem.
    I tried everything and I search everywhere but I can't find a solution.

    I am running Vista Home Premium 32-bit, it's no firewall problem, no cable (I tried 6 cables, who work on other machines), no router problem (because I do not have a router ;)) and I got the latest driver version (even tried more old - same problem).)

    Any ideas? :(

    Thanks in advance,

    dot.

    PS: Excuse my bad English, I'm obviously out of practice ;)

    If this question doesn't show up under Vista OS the problem must be related to the software.

    Try to update the driver LAN and update Windows XP to the last State. I mean that all Windows XP patches and hotfixes must be installed to ensure the good condition of the market.

    Finally go to the Device Manager and go to LAN card properties.
    There, you must disable the saving option and take a look in the Advanced tab.

    Here, you can also disable power options and play around with more parameters.

  • Satellite A300D-17F runs slower than expected

    Satellite A300D-17 F

    Hi friends

    Since I bought this machine, I am not happy.
    There is a problem: he works so slow than other laptops and they have inferior properties.
    I don't understand.

    I almost have to break. I've done all the tips (uninstall tempro, stop the backround programs, program viruses... etc) but it's the same.
    -J' I want to listen to an mp3 that is not open for ten seconds, watch the movie it is not open again for 9 to 10 seconds.
    -i wana to connect to a site web it freezes
    -for example the search for Messenger is taking once again for secondssssss
    -implementation of xp, it is hourssss
    but the machines of my friends who have inferior properties are so fast

    Is there someone has this machines? It has the same problems? or only I have these problems?

    Thank you very much right now.

    Hi mate

    > Configuration of xp, it is hourssss
    This means that you have tested the laptop under Win XP?

    How did you install the Win XP? Have you installed using AHCI mode (in BIOS) or you switch to compatible mode?

    By using the compatibility mode that HARD drive could run slower and this could affect the performance of the operating system.

    Solution: You must install the Win XP in AHCI mode. I think the laptop supports the AMD chipset and the required drivers are therefore part of the ATI graphics chip.
    Download the graphics driver, choose the drivers SATA and include it in the Win XP disc using nLite application. nLite is free and all details can be found in the internet.

  • Satellite A300D-11 q issue with wireless network

    Hello!
    My Satellite A300D-11 q has a problem with wireless communication. It has all the necessary drivers for Win XP installed and connects to the wireless router properly. However, if Windows is hibernating or going on stand by, after waking up, the computer seems connected to the router but there is actually no internet and no matter what. It gets only OK after reboot. It's bad enough.

    Can anyone suggest how this can be corrected, if possible at all?

    I use Satellite A300 with WXP and Win7 (dual boot) and I don t have these problems.

    You can use combination of keys FN + F8 after stand-by mode to disable and enable the wireless network adapter check if the WIFI connection will be established?

  • Satellite A300D-15B - need for Windows 64 - bit XP SATA driver

    Hello

    Someone has drivers SATA for Win XP 64-bit for Satellite A300D-15B?

    Kind regards
    Ganesh

    Hello

    As far as I know this laptop Satellite A300D-15B was equipped with AMD chipset and therefore the SATA driver should be part of the ATI graphic driver.

    But you can also install the Win XP without the SATA drivers.
    In the BIOS, you will need to set the mode SATA from AHCI to compatible.

    Then you should be able to install Win XP on this laptop.

Maybe you are looking for

  • Trade/program?

    Apple has any sort of trade/program for public school districts having exceeded iPads (Gen 1)?

  • IdeaPad 100 bricks through Windows update [solved]

    I got a 100 s the Ideapad Lenovo about three weeks. Can I have solved the problem of the SPACEBAR that some of them have folding bar PIN under this contact is therefore preferable, but he now has a more serious problem. The update failed to 10 Window

  • Looking for a printer HP support Google Cloud

    Dear, I'm looking for printer HP support Google Cloud for Mobile Solution. Please notify. Thank you Bassem

  • Wireless printing fails, cable printing

    I have two printers Laserjet Pro M1217nfw.  Both are configured with a wireless connection to the network. Any computer that has a wired connection to the network can be printed on them.  Any laptop with a wireless connection to the network, cannot. 

  • Extracted blank Panel

    The "Exact" CC Dreamweaver workspace window is empty at the start. Should look like:But all I get is:I already tried to restart Dreamweaver and also resetting the workspace.Thanks for the help!